source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 385

Last change on this file since 385 was 380, checked in by krille_n_@…, 13 years ago

Changes:

  • Added code to XTIDECFG for Power Management (standby timer) support in the BIOS.
  • Some minor optimizations.
File size: 9.5 KB
Line 
1##################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 15 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
11# #
12# * at the end of target name means that Perl is required for the job. #
13# Build directory must be created manually if it does not exist. #
14# #
15# #
16# Following modules can be included or excluded: #
17# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
18# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
19# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
20# MODULE_JRIDE Support for JR-IDE/ISA #
21# MODULE_SERIAL Virtual hard disks using serial port #
22# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
23# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
24# #
25# Not modules but these affect the assembly: #
26# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
27# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
28# USE_286 Use instructions supported by 286 and later #
29# USE_386 Use instructions supported by 386 and later #
30# USE_AT Use features supported on AT and later systems (not available on XT) #
31# #
32##################################################################################################
33
34###########################################
35# Source files and destination executable #
36###########################################
37
38# Assembly source code file (*.asm):
39SRC_ASM = Src/Main.asm
40
41# Program executable file name without extension:
42PROG = ide
43
44
45#######################################
46# Destination and include directories #
47#######################################
48
49# Directory where binary file will be compiled to
50BUILD_DIR = Build
51
52# Subdirectories where included files are:
53HEADERS = Inc/
54HEADERS += Inc/Controllers/
55HEADERS += Src/
56HEADERS += Src/Boot/
57HEADERS += Src/Handlers/
58HEADERS += Src/Handlers/Int13h/
59HEADERS += Src/Handlers/Int13h/EBIOS/
60HEADERS += Src/Handlers/Int13h/Tools/
61HEADERS += Src/Device/
62HEADERS += Src/Device/IDE/
63HEADERS += Src/Device/MemoryMappedIDE/
64HEADERS += Src/Device/Serial/
65HEADERS += Src/Initialization/
66HEADERS += Src/Libraries/
67HEADERS += Src/VariablesAndDPTs/
68
69# Subdirectories where library files are:
70LIBS = ../Assembly_Library/Inc/
71LIBS += ../Assembly_Library/Src/
72LIBS += ../Assembly_Library/Src/Display/
73LIBS += ../Assembly_Library/Src/File/
74LIBS += ../Assembly_Library/Src/Keyboard/
75LIBS += ../Assembly_Library/Src/Menu/
76LIBS += ../Assembly_Library/Src/Menu/Dialog/
77LIBS += ../Assembly_Library/Src/String/
78LIBS += ../Assembly_Library/Src/Time/
79LIBS += ../Assembly_Library/Src/Util/
80LIBS += ../Assembly_Library/Src/Serial/
81LIBS += ../XTIDE_Universal_BIOS/Inc/
82HEADERS += $(LIBS)
83
84
85#################################################################
86# Assembler preprocessor defines. #
87#################################################################
88DEFINES = MODULE_BOOT_MENU MODULE_EBIOS MODULE_STRINGS_COMPRESSED
89DEFINES_XT = ELIMINATE_CGA_SNOW MODULE_SERIAL MODULE_SERIAL_FLOPPY
90DEFINES_XTPLUS = ELIMINATE_CGA_SNOW USE_186 MODULE_SERIAL MODULE_SERIAL_FLOPPY
91DEFINES_AT = USE_286 USE_AT MODULE_SERIAL MODULE_SERIAL_FLOPPY
92DEFINES_XT_LARGE = $(DEFINES_XT) MODULE_JRIDE MODULE_ADVANCED_ATA
93DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) MODULE_JRIDE MODULE_ADVANCED_ATA
94DEFINES_AT_LARGE = $(DEFINES_AT) MODULE_JRIDE MODULE_ADVANCED_ATA
95DEFINES_JRIDE_8K = ELIMINATE_CGA_SNOW MODULE_JRIDE
96DEFINES_386_8K = USE_386 USE_AT MODULE_ADVANCED_ATA
97
98
99###################
100# Other variables #
101###################
102
103# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
104ROMSIZE = 8192
105ROMSIZE_LARGE = 15360
106
107# Add -D in front of every preprocessor define declaration
108DEFS = $(DEFINES:%=-D%)
109DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
110DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
111DEFS_AT = $(DEFINES_AT:%=-D%) -DROMSIZE=$(ROMSIZE)
112DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
113DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
114DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
115DEFS_JRIDE_8K = $(DEFINES_JRIDE_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
116DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
117
118# Add -I in front of all header directories
119IHEADERS = $(HEADERS:%=-I%)
120
121# Path + target file to be built
122TARGET = $(BUILD_DIR)/$(PROG)
123
124#########################
125# Compilers and linkers #
126#########################
127
128# Make
129MAKE = mingw32-make.exe
130
131# Assembler
132AS = nasm.exe
133
134# use this command to erase files.
135RM = -del /Q
136
137
138#############################
139# Compiler and linker flags #
140#############################
141
142# Assembly compiler flags
143ASFLAGS = -f bin # Produce binary object files
144ASFLAGS += $(DEFS) # Preprocessor defines
145ASFLAGS += $(IHEADERS) # Set header file directory paths
146ASFLAGS += -Worphan-labels # Warn about labels without colon
147ASFLAGS += -Ox # Optimize operands to their shortest forms
148
149
150############################################
151# Build process. Actual work is done here. #
152############################################
153
154all: clean small large
155 @echo All done!
156
157small: at xtplus xt jride_8k 386_8k
158 @echo All 8 kiB binaries built!
159
160large: at_large xtplus_large xt_large
161 @echo All 15 kiB binaries built!
162
163at:
164 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
165 @echo * 8k AT version "$(TARGET)_at.bin" built.
166
167at_large:
168 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
169 @echo *15k AT version "$(TARGET)_atl.bin" built.
170
171xtplus:
172 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
173 @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
174
175xtplus_large:
176 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
177 @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
178
179xt:
180 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
181 @echo * 8k XT version "$(TARGET)_xt.bin" built.
182
183xt_large:
184 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
185 @echo *15k XT version "$(TARGET)_xtl.bin" built.
186
187jride_8k:
188 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_JRIDE_8K) -l"$(TARGET)_jr8k.lst" -o"$(TARGET)_jr8k.bin"
189 @echo * 8k JR-IDE/ISA version "$(TARGET)_jr8k.bin" built.
190
191386_8k:
192 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
193 @echo * 8k 386 version "$(TARGET)_386.bin" built.
194
195strings: src\Strings.asm
196 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_XT) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
197 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
198 @echo StringsCompressed.asm updated!
199
200clean:
201 @$(RM) $(BUILD_DIR)\*.*
202 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
203
204checksum: all
205 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
206 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
207 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
208 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
209 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
210 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
211 @perl ..\tools\checksum.pl $(TARGET)_jr8k.bin $(ROMSIZE)
212 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
213
214xt_unused: xt
215 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
216 @perl ..\tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
217
Note: See TracBrowser for help on using the repository browser.