source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 615

Last change on this file since 615 was 614, checked in by Krister Nordvall, 3 years ago

Changes:

  • BIOSDRVS should now build again (broke in r613).
  • Removed the NO_ATAID_CORRECTION define from the Tiny build.
  • Added a new configuration option to skip detection of slave drives.
  • Made FLASH_SIGNATURE 2 bytes shorter to free up ROM space.
  • "Auto Configure" in XTIDECFG should now detect if running on an Olivetti M24, AT&T PC6300, Xerox 6060 or Logabax Persona 1600 and automatically select the fastest compatible transfer mode/device type for any IDE controllers found in the system.
  • Cleaned out some duplicate/unused definitions.
File size: 14.8 KB
RevLine 
[445]1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
[511]7# large Builds 12 kiB binaries only (without checksum) #
[445]8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
[511]11# unused* Checks if there are any unused functions that can be removed to save space #
[445]12# #
13# * at the end of target name means that Perl is required for the job. #
14# Build directory must be created manually if it does not exist. #
15# #
16# #
17# Following modules can be included or excluded: #
18# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
[505]19# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
[589]20# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers (requires USE_386) #
[550]21# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
[445]22# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
23# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
24# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
25# MODULE_IRQ IDE IRQ support #
26# MODULE_SERIAL Virtual hard disks using serial port #
27# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
28# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
[567]29# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
30# MODULE_POWER_MANAGEMENT Power Management support #
[605]31# MODULE_WIN9X_CMOS_HACK Hack for Windows 9x compatibility #
[594]32# MODULE_MFM_COMPATIBILITY Restores BDA drive count for MFM controllers that expect to be the #
33# only hard drive controller on the system #
[445]34# #
35# Not modules but these affect the assembly: #
36# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
[522]37# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
[580]38# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
[613]39# NO_ATAID_CORRECTION Excludes code that corrects illegal CHS values from some CF cards #
[445]40# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
[511]41# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
42# USE_386 Use instructions supported by 386 and later (defines USE_286) #
[445]43# USE_AT Use features supported on AT and later systems (not available on XT) #
[491]44# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
[593]45# USE_NEC_V Optimizations for use with NEC V20/V30 processors only #
[592]46# CLD_NEEDED Only needed for compatibility with buggy software/BIOSes #
[445]47# #
[522]48# ** AT Builds only (when USE_AT is defined) #
[580]49# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
[445]50####################################################################################################
[3]51
52###########################################
53# Source files and destination executable #
54###########################################
55
56# Assembly source code file (*.asm):
57SRC_ASM = Src/Main.asm
58
59# Program executable file name without extension:
60PROG = ide
61
62
63#######################################
64# Destination and include directories #
65#######################################
66
67# Directory where binary file will be compiled to
68BUILD_DIR = Build
69
70# Subdirectories where included files are:
71HEADERS = Inc/
[363]72HEADERS += Inc/Controllers/
[3]73HEADERS += Src/
74HEADERS += Src/Handlers/
75HEADERS += Src/Handlers/Int13h/
[165]76HEADERS += Src/Handlers/Int13h/EBIOS/
77HEADERS += Src/Handlers/Int13h/Tools/
[392]78HEADERS += Src/Handlers/Int19h/
[150]79HEADERS += Src/Device/
80HEADERS += Src/Device/IDE/
[238]81HEADERS += Src/Device/MemoryMappedIDE/
[150]82HEADERS += Src/Device/Serial/
[3]83HEADERS += Src/Initialization/
[392]84HEADERS += Src/Initialization/AdvancedAta/
85HEADERS += Src/Menus/
86HEADERS += Src/Menus/BootMenu/
[3]87HEADERS += Src/Libraries/
88HEADERS += Src/VariablesAndDPTs/
89
[88]90# Subdirectories where library files are:
91LIBS = ../Assembly_Library/Inc/
92LIBS += ../Assembly_Library/Src/
93LIBS += ../Assembly_Library/Src/Display/
94LIBS += ../Assembly_Library/Src/File/
95LIBS += ../Assembly_Library/Src/Keyboard/
96LIBS += ../Assembly_Library/Src/Menu/
97LIBS += ../Assembly_Library/Src/Menu/Dialog/
98LIBS += ../Assembly_Library/Src/String/
99LIBS += ../Assembly_Library/Src/Time/
100LIBS += ../Assembly_Library/Src/Util/
[277]101LIBS += ../Assembly_Library/Src/Serial/
[88]102LIBS += ../XTIDE_Universal_BIOS/Inc/
103HEADERS += $(LIBS)
[3]104
[88]105
[3]106#################################################################
107# Assembler preprocessor defines. #
108#################################################################
[606]109DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT NO_ATAID_VALIDATION CLD_NEEDED
[550]110DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
[389]111
[567]112DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
[580]113DEFINES_XTPLUS = $(DEFINES_XT) USE_186
[589]114DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
[389]115
[397]116DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
117DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
[482]118DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
[389]119
[614]120DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION CLD_NEEDED
[605]121DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN9X_CMOS_HACK
[598]122DEFINES_386_LARGE = $(DEFINES_386) $(DEFINES_COMMON_LARGE)
[3]123
124
125###################
126# Other variables #
127###################
128
[603]129# Target size of the BIOS, used in Main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
[592]130# Note! The size must be a multiple of 2 KB for compatibility reasons.
131BIOS_SIZE_TINY = 4096
132BIOS_SIZE_SMALL = 8192
133BIOS_SIZE_LARGE = 10240
[239]134
[3]135# Add -D in front of every preprocessor define declaration
[592]136DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
137DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
138DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
[506]139DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
140DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
141DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[592]142DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
[593]143DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
144DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[3]145
146# Add -I in front of all header directories
147IHEADERS = $(HEADERS:%=-I%)
148
[145]149# Path + target file to be built
[3]150TARGET = $(BUILD_DIR)/$(PROG)
151
152#########################
153# Compilers and linkers #
154#########################
155
156# Make
157MAKE = mingw32-make.exe
158
159# Assembler
[188]160AS = nasm.exe
[3]161
162# use this command to erase files.
163RM = -del /Q
164
165
166#############################
167# Compiler and linker flags #
168#############################
169
170# Assembly compiler flags
171ASFLAGS = -f bin # Produce binary object files
172ASFLAGS += $(IHEADERS) # Set header file directory paths
173ASFLAGS += -Worphan-labels # Warn about labels without colon
[379]174ASFLAGS += -Ox # Optimize operands to their shortest forms
[3]175
176
177############################################
178# Build process. Actual work is done here. #
179############################################
180
[272]181all: clean small large
[145]182 @echo All done!
[3]183
[593]184small: xt_tiny xt xtplus at 386
[506]185 @echo All small binaries built!
[272]186
[593]187large: xt_large xtplus_large at_large 386_large
[506]188 @echo All large binaries built!
[272]189
[3]190at:
[80]191 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[506]192 @echo * Small AT version "$(TARGET)_at.bin" built.
[3]193
[238]194at_large:
195 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[558]196 @echo * Large AT version "$(TARGET)_atl.bin" built.
[238]197
[3]198xtplus:
[80]199 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[506]200 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
[3]201
[238]202xtplus_large:
203 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[558]204 @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
[238]205
[3]206xt:
[80]207 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[506]208 @echo * Small XT version "$(TARGET)_xt.bin" built.
[3]209
[238]210xt_large:
211 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[558]212 @echo * Large XT version "$(TARGET)_xtl.bin" built.
[277]213
[397]214xt_tiny:
215 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
216 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
[238]217
[593]218386:
219 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
[506]220 @echo * Small 386 version "$(TARGET)_386.bin" built.
[366]221
[593]222386_large:
223 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
224 @echo * Large 386 version "$(TARGET)_386l.bin" built.
225
[322]226strings: src\Strings.asm
[415]227 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
[592]228 @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
[322]229 @echo StringsCompressed.asm updated!
[252]230
[3]231clean:
232 @$(RM) $(BUILD_DIR)\*.*
233 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[186]234
[294]235checksum: all
[592]236 @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
237 @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
238 @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
239 @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
240 @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
241 @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
242 @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
243 @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
[593]244 @perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
[203]245
[491]246unused:
[596]247 @echo "XT Tiny"
248 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -l"$(TARGET)_unused_tiny.lst"
249 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
250 @perl ..\Tools\unused.pl $(TARGET)_unused_tiny.lst $(TARGET)_unused_tiny.asm
[489]251 @echo "XT Small"
252 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
253 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]254 @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
[489]255 @echo "XT Large"
256 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
257 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]258 @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
[596]259 @echo "XT Plus Small"
260 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -l"$(TARGET)_unused_xtp.lst"
261 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
262 @perl ..\Tools\unused.pl $(TARGET)_unused_xtp.lst $(TARGET)_unused_xtp.asm
263 @echo "XT Plus Large"
264 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -l"$(TARGET)_unused_xtpl.lst"
265 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
266 @perl ..\Tools\unused.pl $(TARGET)_unused_xtpl.lst $(TARGET)_unused_xtpl.asm
[489]267 @echo "AT Small"
268 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
269 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]270 @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
[489]271 @echo "AT Large"
272 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
273 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]274 @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
[596]275 @echo "386 Small"
276 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -l"$(TARGET)_unused_386.lst"
277 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
278 @perl ..\Tools\unused.pl $(TARGET)_unused_386.lst $(TARGET)_unused_386.asm
279 @echo "386 Large"
280 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -l"$(TARGET)_unused_386l.lst"
281 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
282 @perl ..\Tools\unused.pl $(TARGET)_unused_386l.lst $(TARGET)_unused_386l.asm
[194]283
Note: See TracBrowser for help on using the repository browser.