source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 612

Last change on this file since 612 was 606, checked in by Krister Nordvall, 4 years ago

Changes:

  • RESERVE_DIAGNOSTIC_CYLINDER has been completely removed as it wasted hard drive space, caused a compatibility problem with 32-bit disk access drivers under Windows 3.x and most importantly, it was in fact not needed since the same thing can be accomplished using the "User specified CHS" feature in XTIDECFG which is better because that applies only to that specific drive instead of all drives under XUB control.
  • In BIOS builds containing MODULE_EBIOS (i.e. all official builds except the Tiny build), drives with a cylinder count less than or equal to 1024 had CHS translation applied to them unnecessarily if CHS translation method was set to Auto (which is the default). This bug has been present for a long time and, as a side effect, made RESERVE_DIAGNOSTIC_CYLINDER useless since the idea behind that was to provide compatibility with other old BIOSes using NORMAL addressing mode. WARNING! With this bug now being fixed, upgrading to this revision of the BIOS will require repartitioning and reformatting any drives affected by this (BIOSDRVS.COM can be helpful in determining which drives are affected).
File size: 14.7 KB
RevLine 
[445]1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
[511]7# large Builds 12 kiB binaries only (without checksum) #
[445]8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
[511]11# unused* Checks if there are any unused functions that can be removed to save space #
[445]12# #
13# * at the end of target name means that Perl is required for the job. #
14# Build directory must be created manually if it does not exist. #
15# #
16# #
17# Following modules can be included or excluded: #
18# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
[505]19# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
[589]20# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers (requires USE_386) #
[550]21# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
[445]22# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
23# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
24# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
25# MODULE_IRQ IDE IRQ support #
26# MODULE_SERIAL Virtual hard disks using serial port #
27# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
28# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
[567]29# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
30# MODULE_POWER_MANAGEMENT Power Management support #
[605]31# MODULE_WIN9X_CMOS_HACK Hack for Windows 9x compatibility #
[594]32# MODULE_MFM_COMPATIBILITY Restores BDA drive count for MFM controllers that expect to be the #
33# only hard drive controller on the system #
[445]34# #
35# Not modules but these affect the assembly: #
36# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
[522]37# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
[580]38# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
[445]39# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
[511]40# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
41# USE_386 Use instructions supported by 386 and later (defines USE_286) #
[445]42# USE_AT Use features supported on AT and later systems (not available on XT) #
[491]43# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
[593]44# USE_NEC_V Optimizations for use with NEC V20/V30 processors only #
[592]45# CLD_NEEDED Only needed for compatibility with buggy software/BIOSes #
[445]46# #
[522]47# ** AT Builds only (when USE_AT is defined) #
[580]48# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
[445]49####################################################################################################
[3]50
51###########################################
52# Source files and destination executable #
53###########################################
54
55# Assembly source code file (*.asm):
56SRC_ASM = Src/Main.asm
57
58# Program executable file name without extension:
59PROG = ide
60
61
62#######################################
63# Destination and include directories #
64#######################################
65
66# Directory where binary file will be compiled to
67BUILD_DIR = Build
68
69# Subdirectories where included files are:
70HEADERS = Inc/
[363]71HEADERS += Inc/Controllers/
[3]72HEADERS += Src/
73HEADERS += Src/Handlers/
74HEADERS += Src/Handlers/Int13h/
[165]75HEADERS += Src/Handlers/Int13h/EBIOS/
76HEADERS += Src/Handlers/Int13h/Tools/
[392]77HEADERS += Src/Handlers/Int19h/
[150]78HEADERS += Src/Device/
79HEADERS += Src/Device/IDE/
[238]80HEADERS += Src/Device/MemoryMappedIDE/
[150]81HEADERS += Src/Device/Serial/
[3]82HEADERS += Src/Initialization/
[392]83HEADERS += Src/Initialization/AdvancedAta/
84HEADERS += Src/Menus/
85HEADERS += Src/Menus/BootMenu/
[3]86HEADERS += Src/Libraries/
87HEADERS += Src/VariablesAndDPTs/
88
[88]89# Subdirectories where library files are:
90LIBS = ../Assembly_Library/Inc/
91LIBS += ../Assembly_Library/Src/
92LIBS += ../Assembly_Library/Src/Display/
93LIBS += ../Assembly_Library/Src/File/
94LIBS += ../Assembly_Library/Src/Keyboard/
95LIBS += ../Assembly_Library/Src/Menu/
96LIBS += ../Assembly_Library/Src/Menu/Dialog/
97LIBS += ../Assembly_Library/Src/String/
98LIBS += ../Assembly_Library/Src/Time/
99LIBS += ../Assembly_Library/Src/Util/
[277]100LIBS += ../Assembly_Library/Src/Serial/
[88]101LIBS += ../XTIDE_Universal_BIOS/Inc/
102HEADERS += $(LIBS)
[3]103
[88]104
[3]105#################################################################
106# Assembler preprocessor defines. #
107#################################################################
[606]108DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT NO_ATAID_VALIDATION CLD_NEEDED
[550]109DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
[389]110
[567]111DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
[580]112DEFINES_XTPLUS = $(DEFINES_XT) USE_186
[589]113DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
[389]114
[397]115DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
116DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
[482]117DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
[389]118
[592]119DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION CLD_NEEDED
[605]120DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN9X_CMOS_HACK
[598]121DEFINES_386_LARGE = $(DEFINES_386) $(DEFINES_COMMON_LARGE)
[3]122
123
124###################
125# Other variables #
126###################
127
[603]128# Target size of the BIOS, used in Main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
[592]129# Note! The size must be a multiple of 2 KB for compatibility reasons.
130BIOS_SIZE_TINY = 4096
131BIOS_SIZE_SMALL = 8192
132BIOS_SIZE_LARGE = 10240
[239]133
[3]134# Add -D in front of every preprocessor define declaration
[592]135DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
136DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
137DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
[506]138DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
139DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
140DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[592]141DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
[593]142DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
143DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[3]144
145# Add -I in front of all header directories
146IHEADERS = $(HEADERS:%=-I%)
147
[145]148# Path + target file to be built
[3]149TARGET = $(BUILD_DIR)/$(PROG)
150
151#########################
152# Compilers and linkers #
153#########################
154
155# Make
156MAKE = mingw32-make.exe
157
158# Assembler
[188]159AS = nasm.exe
[3]160
161# use this command to erase files.
162RM = -del /Q
163
164
165#############################
166# Compiler and linker flags #
167#############################
168
169# Assembly compiler flags
170ASFLAGS = -f bin # Produce binary object files
171ASFLAGS += $(IHEADERS) # Set header file directory paths
172ASFLAGS += -Worphan-labels # Warn about labels without colon
[379]173ASFLAGS += -Ox # Optimize operands to their shortest forms
[3]174
175
176############################################
177# Build process. Actual work is done here. #
178############################################
179
[272]180all: clean small large
[145]181 @echo All done!
[3]182
[593]183small: xt_tiny xt xtplus at 386
[506]184 @echo All small binaries built!
[272]185
[593]186large: xt_large xtplus_large at_large 386_large
[506]187 @echo All large binaries built!
[272]188
[3]189at:
[80]190 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[506]191 @echo * Small AT version "$(TARGET)_at.bin" built.
[3]192
[238]193at_large:
194 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[558]195 @echo * Large AT version "$(TARGET)_atl.bin" built.
[238]196
[3]197xtplus:
[80]198 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[506]199 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
[3]200
[238]201xtplus_large:
202 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[558]203 @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
[238]204
[3]205xt:
[80]206 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[506]207 @echo * Small XT version "$(TARGET)_xt.bin" built.
[3]208
[238]209xt_large:
210 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[558]211 @echo * Large XT version "$(TARGET)_xtl.bin" built.
[277]212
[397]213xt_tiny:
214 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
215 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
[238]216
[593]217386:
218 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
[506]219 @echo * Small 386 version "$(TARGET)_386.bin" built.
[366]220
[593]221386_large:
222 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
223 @echo * Large 386 version "$(TARGET)_386l.bin" built.
224
[322]225strings: src\Strings.asm
[415]226 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
[592]227 @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
[322]228 @echo StringsCompressed.asm updated!
[252]229
[3]230clean:
231 @$(RM) $(BUILD_DIR)\*.*
232 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[186]233
[294]234checksum: all
[592]235 @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
236 @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
237 @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
238 @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
239 @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
240 @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
241 @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
242 @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
[593]243 @perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
[203]244
[491]245unused:
[596]246 @echo "XT Tiny"
247 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -l"$(TARGET)_unused_tiny.lst"
248 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -o"$(TARGET)_unused_tiny.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
249 @perl ..\Tools\unused.pl $(TARGET)_unused_tiny.lst $(TARGET)_unused_tiny.asm
[489]250 @echo "XT Small"
251 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
252 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]253 @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
[489]254 @echo "XT Large"
255 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
256 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]257 @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
[596]258 @echo "XT Plus Small"
259 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -l"$(TARGET)_unused_xtp.lst"
260 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -o"$(TARGET)_unused_xtp.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
261 @perl ..\Tools\unused.pl $(TARGET)_unused_xtp.lst $(TARGET)_unused_xtp.asm
262 @echo "XT Plus Large"
263 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -l"$(TARGET)_unused_xtpl.lst"
264 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -o"$(TARGET)_unused_xtpl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
265 @perl ..\Tools\unused.pl $(TARGET)_unused_xtpl.lst $(TARGET)_unused_xtpl.asm
[489]266 @echo "AT Small"
267 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
268 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]269 @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
[489]270 @echo "AT Large"
271 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
272 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]273 @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
[596]274 @echo "386 Small"
275 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -l"$(TARGET)_unused_386.lst"
276 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -o"$(TARGET)_unused_386.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
277 @perl ..\Tools\unused.pl $(TARGET)_unused_386.lst $(TARGET)_unused_386.asm
278 @echo "386 Large"
279 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -l"$(TARGET)_unused_386l.lst"
280 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -o"$(TARGET)_unused_386l.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
281 @perl ..\Tools\unused.pl $(TARGET)_unused_386l.lst $(TARGET)_unused_386l.asm
[194]282
Note: See TracBrowser for help on using the repository browser.