source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 594

Last change on this file since 594 was 594, checked in by Tomi Tilli, 6 years ago

Previosly committed flash fix for configurator was incomplete. Now fixed properly.
Added MODULE_MFM_COMPATIBILITY.
File size: 14.3 KB
RevLine 
[445]1####################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
[511]7# large Builds 12 kiB binaries only (without checksum) #
[445]8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
[511]11# unused* Checks if there are any unused functions that can be removed to save space #
[445]12# #
13# * at the end of target name means that Perl is required for the job. #
14# Build directory must be created manually if it does not exist. #
15# #
16# #
17# Following modules can be included or excluded: #
18# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
[505]19# MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF #
[589]20# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers (requires USE_386) #
[550]21# MODULE_COMPATIBLE_TABLES Support for ill behaving software that tries to access DPT directly #
[445]22# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
23# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
24# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
25# MODULE_IRQ IDE IRQ support #
26# MODULE_SERIAL Virtual hard disks using serial port #
27# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
28# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
[567]29# MODULE_VERY_LATE_INIT Initialize on INT 13h if our INT 19h handler is not called #
30# MODULE_POWER_MANAGEMENT Power Management support #
[593]31# MODULE_WIN95_CMOS_HACK Hack for Windows 95 compatibility #
[594]32# MODULE_MFM_COMPATIBILITY Restores BDA drive count for MFM controllers that expect to be the #
33# only hard drive controller on the system #
[445]34# #
35# Not modules but these affect the assembly: #
36# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
[522]37# RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory #
[445]38# RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes #
[580]39# NO_ATAID_VALIDATION *** Excludes code that tries to ensure proper communication with drives #
[445]40# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
[511]41# USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)#
42# USE_386 Use instructions supported by 386 and later (defines USE_286) #
[445]43# USE_AT Use features supported on AT and later systems (not available on XT) #
[491]44# USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s #
[593]45# USE_NEC_V Optimizations for use with NEC V20/V30 processors only #
[592]46# CLD_NEEDED Only needed for compatibility with buggy software/BIOSes #
[445]47# #
[522]48# ** AT Builds only (when USE_AT is defined) #
[580]49# *** Use this only when certain known good drives are not being detected (eg WD Caviars) #
[445]50####################################################################################################
[3]51
52###########################################
53# Source files and destination executable #
54###########################################
55
56# Assembly source code file (*.asm):
57SRC_ASM = Src/Main.asm
58
59# Program executable file name without extension:
60PROG = ide
61
62
63#######################################
64# Destination and include directories #
65#######################################
66
67# Directory where binary file will be compiled to
68BUILD_DIR = Build
69
70# Subdirectories where included files are:
71HEADERS = Inc/
[363]72HEADERS += Inc/Controllers/
[3]73HEADERS += Src/
74HEADERS += Src/Handlers/
75HEADERS += Src/Handlers/Int13h/
[165]76HEADERS += Src/Handlers/Int13h/EBIOS/
77HEADERS += Src/Handlers/Int13h/Tools/
[392]78HEADERS += Src/Handlers/Int19h/
[150]79HEADERS += Src/Device/
80HEADERS += Src/Device/IDE/
[238]81HEADERS += Src/Device/MemoryMappedIDE/
[150]82HEADERS += Src/Device/Serial/
[3]83HEADERS += Src/Initialization/
[392]84HEADERS += Src/Initialization/AdvancedAta/
85HEADERS += Src/Menus/
86HEADERS += Src/Menus/BootMenu/
[3]87HEADERS += Src/Libraries/
88HEADERS += Src/VariablesAndDPTs/
89
[88]90# Subdirectories where library files are:
91LIBS = ../Assembly_Library/Inc/
92LIBS += ../Assembly_Library/Src/
93LIBS += ../Assembly_Library/Src/Display/
94LIBS += ../Assembly_Library/Src/File/
95LIBS += ../Assembly_Library/Src/Keyboard/
96LIBS += ../Assembly_Library/Src/Menu/
97LIBS += ../Assembly_Library/Src/Menu/Dialog/
98LIBS += ../Assembly_Library/Src/String/
99LIBS += ../Assembly_Library/Src/Time/
100LIBS += ../Assembly_Library/Src/Util/
[277]101LIBS += ../Assembly_Library/Src/Serial/
[88]102LIBS += ../XTIDE_Universal_BIOS/Inc/
103HEADERS += $(LIBS)
[3]104
[88]105
[3]106#################################################################
107# Assembler preprocessor defines. #
108#################################################################
[592]109DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_EBIOS MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_POWER_MANAGEMENT RESERVE_DIAGNOSTIC_CYLINDER NO_ATAID_VALIDATION CLD_NEEDED
[550]110DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED MODULE_COMPATIBLE_TABLES
[389]111
[567]112DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED
[580]113DEFINES_XTPLUS = $(DEFINES_XT) USE_186
[589]114DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_COMPATIBLE_TABLES
[389]115
[397]116DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
117DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
[482]118DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
[389]119
[592]120DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE NO_ATAID_VALIDATION CLD_NEEDED
[593]121DEFINES_386 = $(DEFINES_AT) USE_386 MODULE_ADVANCED_ATA MODULE_WIN95_CMOS_HACK
122DEFINES_386_LARGE = $(DEFINES_AT_LARGE) USE_386 MODULE_ADVANCED_ATA MODULE_WIN95_CMOS_HACK
[3]123
[567]124DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_POWER_MANAGEMENT MODULE_COMPATIBLE_TABLES
[594]125DEFINES_ALL_FEATURES += ELIMINATE_CGA_SNOW RELOCATE_INT13H_STACK RESERVE_DIAGNOSTIC_CYLINDER MODULE_WIN95_CMOS_HACK MODULE_MFM_COMPATIBILITY
[3]126
[489]127
[3]128###################
129# Other variables #
130###################
131
[592]132# Target size of the BIOS, used in main.asm for number of 512B blocks (CNT_ROM_BLOCKS) and by checksum Perl script below ('make checksum').
133# Note! The size must be a multiple of 2 KB for compatibility reasons.
134BIOS_SIZE_TINY = 4096
135BIOS_SIZE_SMALL = 8192
136BIOS_SIZE_LARGE = 10240
[239]137
[3]138# Add -D in front of every preprocessor define declaration
[592]139DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
140DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
141DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
[506]142DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
143DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
144DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[592]145DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_TINY)
[593]146DEFS_386 = $(DEFINES_386:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_SMALL)
147DEFS_386_LARGE = $(DEFINES_386_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE)
[489]148DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%)
[3]149
150# Add -I in front of all header directories
151IHEADERS = $(HEADERS:%=-I%)
152
[145]153# Path + target file to be built
[3]154TARGET = $(BUILD_DIR)/$(PROG)
155
156#########################
157# Compilers and linkers #
158#########################
159
160# Make
161MAKE = mingw32-make.exe
162
163# Assembler
[188]164AS = nasm.exe
[3]165
166# use this command to erase files.
167RM = -del /Q
168
169
170#############################
171# Compiler and linker flags #
172#############################
173
174# Assembly compiler flags
175ASFLAGS = -f bin # Produce binary object files
176ASFLAGS += $(IHEADERS) # Set header file directory paths
177ASFLAGS += -Worphan-labels # Warn about labels without colon
[379]178ASFLAGS += -Ox # Optimize operands to their shortest forms
[3]179
180
181############################################
182# Build process. Actual work is done here. #
183############################################
184
[272]185all: clean small large
[145]186 @echo All done!
[3]187
[593]188small: xt_tiny xt xtplus at 386
[506]189 @echo All small binaries built!
[272]190
[593]191large: xt_large xtplus_large at_large 386_large
[506]192 @echo All large binaries built!
[272]193
[3]194at:
[80]195 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[506]196 @echo * Small AT version "$(TARGET)_at.bin" built.
[3]197
[238]198at_large:
199 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[558]200 @echo * Large AT version "$(TARGET)_atl.bin" built.
[238]201
[3]202xtplus:
[80]203 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[506]204 @echo * Small XT Plus version "$(TARGET)_xtp.bin" built.
[3]205
[238]206xtplus_large:
207 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[558]208 @echo * Large XT Plus version "$(TARGET)_xtpl.bin" built.
[238]209
[3]210xt:
[80]211 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[506]212 @echo * Small XT version "$(TARGET)_xt.bin" built.
[3]213
[238]214xt_large:
215 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[558]216 @echo * Large XT version "$(TARGET)_xtl.bin" built.
[277]217
[397]218xt_tiny:
219 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
220 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
[238]221
[593]222386:
223 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
[506]224 @echo * Small 386 version "$(TARGET)_386.bin" built.
[366]225
[593]226386_large:
227 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_LARGE) -l"$(TARGET)_386l.lst" -o"$(TARGET)_386l.bin"
228 @echo * Large 386 version "$(TARGET)_386l.bin" built.
229
[322]230strings: src\Strings.asm
[415]231 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
[592]232 @perl ..\Tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
[322]233 @echo StringsCompressed.asm updated!
[252]234
[3]235clean:
236 @$(RM) $(BUILD_DIR)\*.*
237 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[186]238
[294]239checksum: all
[592]240 @perl ..\Tools\checksum.pl $(TARGET)_tiny.bin $(BIOS_SIZE_TINY)
241 @perl ..\Tools\checksum.pl $(TARGET)_xt.bin $(BIOS_SIZE_SMALL)
242 @perl ..\Tools\checksum.pl $(TARGET)_xtp.bin $(BIOS_SIZE_SMALL)
243 @perl ..\Tools\checksum.pl $(TARGET)_at.bin $(BIOS_SIZE_SMALL)
244 @perl ..\Tools\checksum.pl $(TARGET)_xtl.bin $(BIOS_SIZE_LARGE)
245 @perl ..\Tools\checksum.pl $(TARGET)_xtpl.bin $(BIOS_SIZE_LARGE)
246 @perl ..\Tools\checksum.pl $(TARGET)_atl.bin $(BIOS_SIZE_LARGE)
247 @perl ..\Tools\checksum.pl $(TARGET)_386.bin $(BIOS_SIZE_SMALL)
[593]248 @perl ..\Tools\checksum.pl $(TARGET)_386l.bin $(BIOS_SIZE_LARGE)
[203]249
[491]250unused:
[489]251 @echo "All Features"
252 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst"
253 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]254 @perl ..\Tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm
[489]255 @echo "XT Small"
256 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst"
257 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]258 @perl ..\Tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm
[489]259 @echo "XT Large"
260 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst"
261 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]262 @perl ..\Tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm
[489]263 @echo "AT Small"
264 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst"
265 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]266 @perl ..\Tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm
[489]267 @echo "AT Large"
268 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst"
269 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
[592]270 @perl ..\Tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm
[194]271
[489]272
Note: See TracBrowser for help on using the repository browser.