| [445] | 1 | #################################################################################################### |
|---|
| 2 | # Makefile to build XTIDE Universal BIOS. # |
|---|
| 3 | # # |
|---|
| 4 | # Valid makefile targets are: # |
|---|
| 5 | # all Removes existing files and builds binary files in \Build # |
|---|
| 6 | # small Builds 8 kiB binaries only (without checksum) # |
|---|
| [511] | 7 | # large Builds 12 kiB binaries only (without checksum) # |
|---|
| [445] | 8 | # clean Removes all files from \Build # |
|---|
| 9 | # checksum* Builds all and then generates checksum byte to all binary files # |
|---|
| 10 | # strings* Compress src\Strings.asm to src\StringsCompressed.asm # |
|---|
| [511] | 11 | # unused* Checks if there are any unused functions that can be removed to save space # |
|---|
| [445] | 12 | # # |
|---|
| 13 | # * at the end of target name means that Perl is required for the job. # |
|---|
| 14 | # Build directory must be created manually if it does not exist. # |
|---|
| 15 | # # |
|---|
| 16 | # # |
|---|
| 17 | # Following modules can be included or excluded: # |
|---|
| 18 | # MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE # |
|---|
| [505] | 19 | # MODULE_8BIT_IDE_ADVANCED Support for memory mapped and DMA based cards like JRIDE and XTCF # |
|---|
| [445] | 20 | # MODULE_ADVANCED_ATA Native support for some VLB IDE controllers # |
|---|
| 21 | # MODULE_BOOT_MENU Boot Menu for selection of drive to boot from # |
|---|
| 22 | # MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB # |
|---|
| 23 | # MODULE_HOTKEYS Hotkey Bar to boot from any drive # |
|---|
| 24 | # MODULE_IRQ IDE IRQ support # |
|---|
| 25 | # MODULE_SERIAL Virtual hard disks using serial port # |
|---|
| 26 | # MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) # |
|---|
| 27 | # MODULE_STRINGS_COMPRESSED Use compressed strings to save space # |
|---|
| 28 | # MODULE_FEATURE_SETS Power Management support # |
|---|
| 29 | # # |
|---|
| 30 | # Not modules but these affect the assembly: # |
|---|
| 31 | # ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes # |
|---|
| [522] | 32 | # RELOCATE_INT13H_STACK ** Relocates INT 13h stack to beginning of stolen conventional memory # |
|---|
| [445] | 33 | # RESERVE_DIAGNOSTIC_CYLINDER Reserve one L-CHS cylinder for compatibility with old BIOSes # |
|---|
| 34 | # USE_186 Use instructions supported by 80188/80186 and V20/V30 and later # |
|---|
| [511] | 35 | # USE_286 Use instructions supported by 286 and later (defines USE_UNDOC_INTEL)# |
|---|
| 36 | # USE_386 Use instructions supported by 386 and later (defines USE_286) # |
|---|
| [445] | 37 | # USE_AT Use features supported on AT and later systems (not available on XT) # |
|---|
| [491] | 38 | # USE_UNDOC_INTEL Optimizations for Intel CPU:s - do NOT use on NEC V20/V30/Sony CPU:s # |
|---|
| [445] | 39 | # # |
|---|
| [522] | 40 | # ** AT Builds only (when USE_AT is defined) # |
|---|
| [445] | 41 | #################################################################################################### |
|---|
| [3] | 42 | |
|---|
| 43 | ########################################### |
|---|
| 44 | # Source files and destination executable # |
|---|
| 45 | ########################################### |
|---|
| 46 | |
|---|
| 47 | # Assembly source code file (*.asm): |
|---|
| 48 | SRC_ASM = Src/Main.asm |
|---|
| 49 | |
|---|
| 50 | # Program executable file name without extension: |
|---|
| 51 | PROG = ide |
|---|
| 52 | |
|---|
| 53 | |
|---|
| 54 | ####################################### |
|---|
| 55 | # Destination and include directories # |
|---|
| 56 | ####################################### |
|---|
| 57 | |
|---|
| 58 | # Directory where binary file will be compiled to |
|---|
| 59 | BUILD_DIR = Build |
|---|
| 60 | |
|---|
| 61 | # Subdirectories where included files are: |
|---|
| 62 | HEADERS = Inc/ |
|---|
| [363] | 63 | HEADERS += Inc/Controllers/ |
|---|
| [3] | 64 | HEADERS += Src/ |
|---|
| 65 | HEADERS += Src/Handlers/ |
|---|
| 66 | HEADERS += Src/Handlers/Int13h/ |
|---|
| [165] | 67 | HEADERS += Src/Handlers/Int13h/EBIOS/ |
|---|
| 68 | HEADERS += Src/Handlers/Int13h/Tools/ |
|---|
| [392] | 69 | HEADERS += Src/Handlers/Int19h/ |
|---|
| [150] | 70 | HEADERS += Src/Device/ |
|---|
| 71 | HEADERS += Src/Device/IDE/ |
|---|
| [238] | 72 | HEADERS += Src/Device/MemoryMappedIDE/ |
|---|
| [150] | 73 | HEADERS += Src/Device/Serial/ |
|---|
| [3] | 74 | HEADERS += Src/Initialization/ |
|---|
| [392] | 75 | HEADERS += Src/Initialization/AdvancedAta/ |
|---|
| 76 | HEADERS += Src/Menus/ |
|---|
| 77 | HEADERS += Src/Menus/BootMenu/ |
|---|
| [3] | 78 | HEADERS += Src/Libraries/ |
|---|
| 79 | HEADERS += Src/VariablesAndDPTs/ |
|---|
| 80 | |
|---|
| [88] | 81 | # Subdirectories where library files are: |
|---|
| 82 | LIBS = ../Assembly_Library/Inc/ |
|---|
| 83 | LIBS += ../Assembly_Library/Src/ |
|---|
| 84 | LIBS += ../Assembly_Library/Src/Display/ |
|---|
| 85 | LIBS += ../Assembly_Library/Src/File/ |
|---|
| 86 | LIBS += ../Assembly_Library/Src/Keyboard/ |
|---|
| 87 | LIBS += ../Assembly_Library/Src/Menu/ |
|---|
| 88 | LIBS += ../Assembly_Library/Src/Menu/Dialog/ |
|---|
| 89 | LIBS += ../Assembly_Library/Src/String/ |
|---|
| 90 | LIBS += ../Assembly_Library/Src/Time/ |
|---|
| 91 | LIBS += ../Assembly_Library/Src/Util/ |
|---|
| [277] | 92 | LIBS += ../Assembly_Library/Src/Serial/ |
|---|
| [88] | 93 | LIBS += ../XTIDE_Universal_BIOS/Inc/ |
|---|
| 94 | HEADERS += $(LIBS) |
|---|
| [3] | 95 | |
|---|
| [88] | 96 | |
|---|
| [3] | 97 | ################################################################# |
|---|
| 98 | # Assembler preprocessor defines. # |
|---|
| 99 | ################################################################# |
|---|
| [506] | 100 | DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_8BIT_IDE MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_EBIOS MODULE_FEATURE_SETS RESERVE_DIAGNOSTIC_CYLINDER |
|---|
| 101 | DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_8BIT_IDE_ADVANCED |
|---|
| [389] | 102 | |
|---|
| [506] | 103 | DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE_ADVANCED |
|---|
| [397] | 104 | DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186 |
|---|
| [511] | 105 | DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 RELOCATE_INT13H_STACK MODULE_IRQ MODULE_ADVANCED_ATA |
|---|
| [389] | 106 | |
|---|
| [397] | 107 | DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE) |
|---|
| 108 | DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE) |
|---|
| [482] | 109 | DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE) |
|---|
| [389] | 110 | |
|---|
| [400] | 111 | DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE |
|---|
| [397] | 112 | DEFINES_386_8K = $(DEFINES_AT) USE_386 |
|---|
| [3] | 113 | |
|---|
| [511] | 114 | DEFINES_ALL_FEATURES = MODULE_8BIT_IDE MODULE_8BIT_IDE_ADVANCED MODULE_ADVANCED_ATA MODULE_EBIOS MODULE_BOOT_MENU MODULE_HOTKEYS MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_STRINGS_COMPRESSED MODULE_FEATURE_SETS |
|---|
| [3] | 115 | |
|---|
| [489] | 116 | |
|---|
| [3] | 117 | ################### |
|---|
| 118 | # Other variables # |
|---|
| 119 | ################### |
|---|
| 120 | |
|---|
| [239] | 121 | # Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below |
|---|
| [506] | 122 | BIOS_SIZE = 8192 # For BIOS header (use even multiplier!) |
|---|
| 123 | ROMSIZE = $(BIOS_SIZE) # Size of binary to build when building with make checksum |
|---|
| [511] | 124 | BIOS_SIZE_LARGE = 12288 |
|---|
| [506] | 125 | ROMSIZE_LARGE = $(BIOS_SIZE_LARGE) |
|---|
| [239] | 126 | |
|---|
| [3] | 127 | # Add -D in front of every preprocessor define declaration |
|---|
| [506] | 128 | DEFS_XT = $(DEFINES_XT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
|---|
| 129 | DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
|---|
| 130 | DEFS_AT = $(DEFINES_AT:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
|---|
| 131 | DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) |
|---|
| 132 | DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) |
|---|
| 133 | DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE_LARGE) |
|---|
| 134 | DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
|---|
| 135 | DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DBIOS_SIZE=$(BIOS_SIZE) |
|---|
| [489] | 136 | DEFS_ALL_FEATURES = $(DEFINES_ALL_FEATURES:%=-D%) |
|---|
| [3] | 137 | |
|---|
| 138 | # Add -I in front of all header directories |
|---|
| 139 | IHEADERS = $(HEADERS:%=-I%) |
|---|
| 140 | |
|---|
| [145] | 141 | # Path + target file to be built |
|---|
| [3] | 142 | TARGET = $(BUILD_DIR)/$(PROG) |
|---|
| 143 | |
|---|
| 144 | ######################### |
|---|
| 145 | # Compilers and linkers # |
|---|
| 146 | ######################### |
|---|
| 147 | |
|---|
| 148 | # Make |
|---|
| 149 | MAKE = mingw32-make.exe |
|---|
| 150 | |
|---|
| 151 | # Assembler |
|---|
| [188] | 152 | AS = nasm.exe |
|---|
| [3] | 153 | |
|---|
| 154 | # use this command to erase files. |
|---|
| 155 | RM = -del /Q |
|---|
| 156 | |
|---|
| 157 | |
|---|
| 158 | ############################# |
|---|
| 159 | # Compiler and linker flags # |
|---|
| 160 | ############################# |
|---|
| 161 | |
|---|
| 162 | # Assembly compiler flags |
|---|
| 163 | ASFLAGS = -f bin # Produce binary object files |
|---|
| 164 | ASFLAGS += $(IHEADERS) # Set header file directory paths |
|---|
| 165 | ASFLAGS += -Worphan-labels # Warn about labels without colon |
|---|
| [379] | 166 | ASFLAGS += -Ox # Optimize operands to their shortest forms |
|---|
| [3] | 167 | |
|---|
| 168 | |
|---|
| 169 | ############################################ |
|---|
| 170 | # Build process. Actual work is done here. # |
|---|
| 171 | ############################################ |
|---|
| 172 | |
|---|
| [272] | 173 | all: clean small large |
|---|
| [145] | 174 | @echo All done! |
|---|
| [3] | 175 | |
|---|
| [397] | 176 | small: xt_tiny xt xtplus at 386_8k |
|---|
| [506] | 177 | @echo All small binaries built! |
|---|
| [272] | 178 | |
|---|
| [397] | 179 | large: xt_large xtplus_large at_large |
|---|
| [506] | 180 | @echo All large binaries built! |
|---|
| [272] | 181 | |
|---|
| [3] | 182 | at: |
|---|
| [80] | 183 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin" |
|---|
| [506] | 184 | @echo * Small AT version "$(TARGET)_at.bin" built. |
|---|
| [3] | 185 | |
|---|
| [238] | 186 | at_large: |
|---|
| 187 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin" |
|---|
| [506] | 188 | @echo *Large AT version "$(TARGET)_atl.bin" built. |
|---|
| [238] | 189 | |
|---|
| [3] | 190 | xtplus: |
|---|
| [80] | 191 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin" |
|---|
| [506] | 192 | @echo * Small XT Plus version "$(TARGET)_xtp.bin" built. |
|---|
| [3] | 193 | |
|---|
| [238] | 194 | xtplus_large: |
|---|
| 195 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin" |
|---|
| [506] | 196 | @echo *Large XT Plus version "$(TARGET)_xtpl.bin" built. |
|---|
| [238] | 197 | |
|---|
| [3] | 198 | xt: |
|---|
| [80] | 199 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin" |
|---|
| [506] | 200 | @echo * Small XT version "$(TARGET)_xt.bin" built. |
|---|
| [3] | 201 | |
|---|
| [238] | 202 | xt_large: |
|---|
| 203 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin" |
|---|
| [506] | 204 | @echo *Large XT version "$(TARGET)_xtl.bin" built. |
|---|
| [277] | 205 | |
|---|
| [397] | 206 | xt_tiny: |
|---|
| 207 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin" |
|---|
| 208 | @echo * Tiny XT version "$(TARGET)_tiny.bin" built. |
|---|
| [238] | 209 | |
|---|
| [366] | 210 | 386_8k: |
|---|
| 211 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin" |
|---|
| [506] | 212 | @echo * Small 386 version "$(TARGET)_386.bin" built. |
|---|
| [366] | 213 | |
|---|
| [322] | 214 | strings: src\Strings.asm |
|---|
| [415] | 215 | @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst |
|---|
| [322] | 216 | @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm |
|---|
| 217 | @echo StringsCompressed.asm updated! |
|---|
| [252] | 218 | |
|---|
| [3] | 219 | clean: |
|---|
| 220 | @$(RM) $(BUILD_DIR)\*.* |
|---|
| 221 | @echo Deleted "(*.*)" from "$(BUILD_DIR)/" |
|---|
| [186] | 222 | |
|---|
| [294] | 223 | checksum: all |
|---|
| [397] | 224 | @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE) |
|---|
| 225 | @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE) |
|---|
| 226 | @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE) |
|---|
| 227 | @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE) |
|---|
| 228 | @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE) |
|---|
| 229 | @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE) |
|---|
| [240] | 230 | @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE) |
|---|
| [369] | 231 | @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE) |
|---|
| [203] | 232 | |
|---|
| [491] | 233 | unused: |
|---|
| [489] | 234 | @echo "All Features" |
|---|
| 235 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -l"$(TARGET)_unused.lst" |
|---|
| 236 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_ALL_FEATURES) $(DEFS_XT) $(DEFS_XT_PLUS) $(DEFS_AT) $(DEFS_XT_LARGE) $(DEFS_XTPLUS_LARGE) $(DEFS_AT_LARGE) $(DEFS_XT_TINY) $(DEFS_386_8K) -o"$(TARGET)_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
|---|
| 237 | @perl ..\tools\unused.pl $(TARGET)_unused.lst $(TARGET)_unused.asm |
|---|
| 238 | @echo "XT Small" |
|---|
| 239 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -l"$(TARGET)_unused_xt.lst" |
|---|
| 240 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_unused_xt.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
|---|
| 241 | @perl ..\tools\unused.pl $(TARGET)_unused_xt.lst $(TARGET)_unused_xt.asm |
|---|
| 242 | @echo "XT Large" |
|---|
| 243 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -l"$(TARGET)_unused_xtl.lst" |
|---|
| 244 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -o"$(TARGET)_unused_xtl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
|---|
| 245 | @perl ..\tools\unused.pl $(TARGET)_unused_xtl.lst $(TARGET)_unused_xtl.asm |
|---|
| 246 | @echo "AT Small" |
|---|
| 247 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -l"$(TARGET)_unused_at.lst" |
|---|
| 248 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -o"$(TARGET)_unused_at.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
|---|
| 249 | @perl ..\tools\unused.pl $(TARGET)_unused_at.lst $(TARGET)_unused_at.asm |
|---|
| 250 | @echo "AT Large" |
|---|
| 251 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -l"$(TARGET)_unused_atl.lst" |
|---|
| 252 | @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -o"$(TARGET)_unused_atl.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS |
|---|
| 253 | @perl ..\tools\unused.pl $(TARGET)_unused_atl.lst $(TARGET)_unused_atl.asm |
|---|
| [194] | 254 | |
|---|
| [489] | 255 | |
|---|
