source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 416

Last change on this file since 416 was 415, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Strings.asm updated for MODULE_BOOT_MENU and MODULE_HOTKEYS.
File size: 10.1 KB
RevLine 
[379]1##################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
[389]5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 15 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
[379]11# #
12# * at the end of target name means that Perl is required for the job. #
13# Build directory must be created manually if it does not exist. #
14# #
15# #
16# Following modules can be included or excluded: #
[400]17# MODULE_8BIT_IDE Support for 8-BIT IDE cards like XTIDE #
18# MODULE_JRIDE Support for JR-IDE/ISA #
[379]19# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
[380]20# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
21# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
[395]22# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
[398]23# MODULE_IRQ IDE IRQ support #
[379]24# MODULE_SERIAL Virtual hard disks using serial port #
[380]25# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
26# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
[399]27# MODULE_FEATURE_SETS Power Management support #
[379]28# #
29# Not modules but these affect the assembly: #
[380]30# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
[379]31# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
32# USE_286 Use instructions supported by 286 and later #
33# USE_386 Use instructions supported by 386 and later #
34# USE_AT Use features supported on AT and later systems (not available on XT) #
35# #
36##################################################################################################
[3]37
38###########################################
39# Source files and destination executable #
40###########################################
41
42# Assembly source code file (*.asm):
43SRC_ASM = Src/Main.asm
44
45# Program executable file name without extension:
46PROG = ide
47
48
49#######################################
50# Destination and include directories #
51#######################################
52
53# Directory where binary file will be compiled to
54BUILD_DIR = Build
55
56# Subdirectories where included files are:
57HEADERS = Inc/
[363]58HEADERS += Inc/Controllers/
[3]59HEADERS += Src/
60HEADERS += Src/Handlers/
61HEADERS += Src/Handlers/Int13h/
[165]62HEADERS += Src/Handlers/Int13h/EBIOS/
63HEADERS += Src/Handlers/Int13h/Tools/
[392]64HEADERS += Src/Handlers/Int19h/
[150]65HEADERS += Src/Device/
66HEADERS += Src/Device/IDE/
[238]67HEADERS += Src/Device/MemoryMappedIDE/
[150]68HEADERS += Src/Device/Serial/
[3]69HEADERS += Src/Initialization/
[392]70HEADERS += Src/Initialization/AdvancedAta/
71HEADERS += Src/Menus/
72HEADERS += Src/Menus/BootMenu/
[3]73HEADERS += Src/Libraries/
74HEADERS += Src/VariablesAndDPTs/
75
[88]76# Subdirectories where library files are:
77LIBS = ../Assembly_Library/Inc/
78LIBS += ../Assembly_Library/Src/
79LIBS += ../Assembly_Library/Src/Display/
80LIBS += ../Assembly_Library/Src/File/
81LIBS += ../Assembly_Library/Src/Keyboard/
82LIBS += ../Assembly_Library/Src/Menu/
83LIBS += ../Assembly_Library/Src/Menu/Dialog/
84LIBS += ../Assembly_Library/Src/String/
85LIBS += ../Assembly_Library/Src/Time/
86LIBS += ../Assembly_Library/Src/Util/
[277]87LIBS += ../Assembly_Library/Src/Serial/
[88]88LIBS += ../XTIDE_Universal_BIOS/Inc/
89HEADERS += $(LIBS)
[3]90
[88]91
[3]92#################################################################
93# Assembler preprocessor defines. #
94#################################################################
[399]95DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_EBIOS MODULE_FEATURE_SETS
[400]96DEFINES_COMMON_LARGE = MODULE_BOOT_MENU MODULE_SERIAL MODULE_SERIAL_FLOPPY
[389]97
[400]98DEFINES_XT = $(DEFINES_COMMON) ELIMINATE_CGA_SNOW MODULE_8BIT_IDE MODULE_JRIDE MODULE_SERIAL MODULE_SERIAL_FLOPPY
[397]99DEFINES_XTPLUS = $(DEFINES_COMMON) $(DEFINES_XT) USE_186
[398]100DEFINES_AT = $(DEFINES_COMMON) USE_AT USE_286 MODULE_IRQ MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_ADVANCED_ATA
[389]101
[397]102DEFINES_XT_LARGE = $(DEFINES_XT) $(DEFINES_COMMON_LARGE)
103DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) $(DEFINES_COMMON_LARGE)
104DEFINES_AT_LARGE = $(DEFINES_AT) $(DEFINES_COMMON_LARGE)
[389]105
[400]106DEFINES_XT_TINY = MODULE_STRINGS_COMPRESSED MODULE_8BIT_IDE
[397]107DEFINES_386_8K = $(DEFINES_AT) USE_386
[3]108
109
110###################
111# Other variables #
112###################
113
[239]114# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
115ROMSIZE = 8192
116ROMSIZE_LARGE = 15360
117
[3]118# Add -D in front of every preprocessor define declaration
[239]119DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
120DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
121DEFS_AT = $(DEFINES_AT:%=-D%) -DROMSIZE=$(ROMSIZE)
122DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
123DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
124DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
[397]125DEFS_XT_TINY = $(DEFINES_XT_TINY:%=-D%) -DROMSIZE=$(ROMSIZE)
[366]126DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
[3]127
128# Add -I in front of all header directories
129IHEADERS = $(HEADERS:%=-I%)
130
[145]131# Path + target file to be built
[3]132TARGET = $(BUILD_DIR)/$(PROG)
133
134#########################
135# Compilers and linkers #
136#########################
137
138# Make
139MAKE = mingw32-make.exe
140
141# Assembler
[188]142AS = nasm.exe
[3]143
144# use this command to erase files.
145RM = -del /Q
146
147
148#############################
149# Compiler and linker flags #
150#############################
151
152# Assembly compiler flags
153ASFLAGS = -f bin # Produce binary object files
154ASFLAGS += $(IHEADERS) # Set header file directory paths
155ASFLAGS += -Worphan-labels # Warn about labels without colon
[379]156ASFLAGS += -Ox # Optimize operands to their shortest forms
[3]157
158
159############################################
160# Build process. Actual work is done here. #
161############################################
162
[272]163all: clean small large
[145]164 @echo All done!
[3]165
[397]166small: xt_tiny xt xtplus at 386_8k
[294]167 @echo All 8 kiB binaries built!
[272]168
[397]169large: xt_large xtplus_large at_large
[294]170 @echo All 15 kiB binaries built!
[272]171
[3]172at:
[80]173 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[272]174 @echo * 8k AT version "$(TARGET)_at.bin" built.
[3]175
[238]176at_large:
177 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[272]178 @echo *15k AT version "$(TARGET)_atl.bin" built.
[238]179
[3]180xtplus:
[80]181 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[294]182 @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
[3]183
[238]184xtplus_large:
185 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[294]186 @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
[238]187
[3]188xt:
[80]189 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[272]190 @echo * 8k XT version "$(TARGET)_xt.bin" built.
[3]191
[238]192xt_large:
193 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[272]194 @echo *15k XT version "$(TARGET)_xtl.bin" built.
[277]195
[397]196xt_tiny:
197 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_TINY) -l"$(TARGET)_tiny.lst" -o"$(TARGET)_tiny.bin"
198 @echo * Tiny XT version "$(TARGET)_tiny.bin" built.
[238]199
[366]200386_8k:
201 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
202 @echo * 8k 386 version "$(TARGET)_386.bin" built.
203
[322]204strings: src\Strings.asm
[415]205 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_AT_LARGE) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
[322]206 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
207 @echo StringsCompressed.asm updated!
[252]208
[3]209clean:
210 @$(RM) $(BUILD_DIR)\*.*
211 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[186]212
[294]213checksum: all
[397]214 @perl ..\tools\checksum.pl $(TARGET)_tiny.bin $(ROMSIZE)
215 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
216 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
217 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
218 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
219 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
[240]220 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
[369]221 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
[203]222
[252]223xt_unused: xt
[370]224 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
225 @perl ..\tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
[194]226
Note: See TracBrowser for help on using the repository browser.