source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 395

Last change on this file since 395 was 395, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Hotkey Bar and drive translations are now in MODULE_HOTKEYS.
File size: 9.8 KB
RevLine 
[379]1##################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
[389]5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 15 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
[379]11# #
12# * at the end of target name means that Perl is required for the job. #
13# Build directory must be created manually if it does not exist. #
14# #
15# #
16# Following modules can be included or excluded: #
17# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
[380]18# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
19# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
[395]20# MODULE_HOTKEYS Hotkey Bar to boot from any drive #
[379]21# MODULE_JRIDE Support for JR-IDE/ISA #
22# MODULE_SERIAL Virtual hard disks using serial port #
[380]23# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
24# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
[379]25# #
26# Not modules but these affect the assembly: #
[380]27# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
[379]28# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
29# USE_286 Use instructions supported by 286 and later #
30# USE_386 Use instructions supported by 386 and later #
31# USE_AT Use features supported on AT and later systems (not available on XT) #
32# #
33##################################################################################################
[3]34
35###########################################
36# Source files and destination executable #
37###########################################
38
39# Assembly source code file (*.asm):
40SRC_ASM = Src/Main.asm
41
42# Program executable file name without extension:
43PROG = ide
44
45
46#######################################
47# Destination and include directories #
48#######################################
49
50# Directory where binary file will be compiled to
51BUILD_DIR = Build
52
53# Subdirectories where included files are:
54HEADERS = Inc/
[363]55HEADERS += Inc/Controllers/
[3]56HEADERS += Src/
57HEADERS += Src/Handlers/
58HEADERS += Src/Handlers/Int13h/
[165]59HEADERS += Src/Handlers/Int13h/EBIOS/
60HEADERS += Src/Handlers/Int13h/Tools/
[392]61HEADERS += Src/Handlers/Int19h/
[150]62HEADERS += Src/Device/
63HEADERS += Src/Device/IDE/
[238]64HEADERS += Src/Device/MemoryMappedIDE/
[150]65HEADERS += Src/Device/Serial/
[3]66HEADERS += Src/Initialization/
[392]67HEADERS += Src/Initialization/AdvancedAta/
68HEADERS += Src/Menus/
69HEADERS += Src/Menus/BootMenu/
[3]70HEADERS += Src/Libraries/
71HEADERS += Src/VariablesAndDPTs/
72
[88]73# Subdirectories where library files are:
74LIBS = ../Assembly_Library/Inc/
75LIBS += ../Assembly_Library/Src/
76LIBS += ../Assembly_Library/Src/Display/
77LIBS += ../Assembly_Library/Src/File/
78LIBS += ../Assembly_Library/Src/Keyboard/
79LIBS += ../Assembly_Library/Src/Menu/
80LIBS += ../Assembly_Library/Src/Menu/Dialog/
81LIBS += ../Assembly_Library/Src/String/
82LIBS += ../Assembly_Library/Src/Time/
83LIBS += ../Assembly_Library/Src/Util/
[277]84LIBS += ../Assembly_Library/Src/Serial/
[88]85LIBS += ../XTIDE_Universal_BIOS/Inc/
86HEADERS += $(LIBS)
[3]87
[88]88
[3]89#################################################################
90# Assembler preprocessor defines. #
91#################################################################
[395]92DEFINES_COMMON = MODULE_STRINGS_COMPRESSED MODULE_HOTKEYS MODULE_EBIOS
[389]93
[272]94DEFINES_XT = ELIMINATE_CGA_SNOW MODULE_SERIAL MODULE_SERIAL_FLOPPY
[392]95DEFINES_XTPLUS = USE_186 ELIMINATE_CGA_SNOW MODULE_SERIAL MODULE_SERIAL_FLOPPY
96DEFINES_AT = USE_AT USE_286 MODULE_SERIAL MODULE_SERIAL_FLOPPY MODULE_ADVANCED_ATA
[389]97
[392]98DEFINES_XT_LARGE = $(DEFINES_XT) MODULE_BOOT_MENU MODULE_JRIDE MODULE_ADVANCED_ATA
99DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) MODULE_BOOT_MENU MODULE_JRIDE MODULE_ADVANCED_ATA
100DEFINES_AT_LARGE = $(DEFINES_AT) MODULE_BOOT_MENU MODULE_JRIDE MODULE_ADVANCED_ATA
[389]101
[272]102DEFINES_JRIDE_8K = ELIMINATE_CGA_SNOW MODULE_JRIDE
[392]103DEFINES_386_8K = USE_AT USE_386 MODULE_ADVANCED_ATA
[3]104
105
106###################
107# Other variables #
108###################
109
[239]110# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
111ROMSIZE = 8192
112ROMSIZE_LARGE = 15360
113
[3]114# Add -D in front of every preprocessor define declaration
[389]115DEFS = $(DEFINES_COMMON:%=-D%)
[239]116DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
117DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
118DEFS_AT = $(DEFINES_AT:%=-D%) -DROMSIZE=$(ROMSIZE)
119DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
120DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
121DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
[272]122DEFS_JRIDE_8K = $(DEFINES_JRIDE_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
[366]123DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
[3]124
125# Add -I in front of all header directories
126IHEADERS = $(HEADERS:%=-I%)
127
[145]128# Path + target file to be built
[3]129TARGET = $(BUILD_DIR)/$(PROG)
130
131#########################
132# Compilers and linkers #
133#########################
134
135# Make
136MAKE = mingw32-make.exe
137
138# Assembler
[188]139AS = nasm.exe
[3]140
141# use this command to erase files.
142RM = -del /Q
143
144
145#############################
146# Compiler and linker flags #
147#############################
148
149# Assembly compiler flags
150ASFLAGS = -f bin # Produce binary object files
151ASFLAGS += $(DEFS) # Preprocessor defines
152ASFLAGS += $(IHEADERS) # Set header file directory paths
153ASFLAGS += -Worphan-labels # Warn about labels without colon
[379]154ASFLAGS += -Ox # Optimize operands to their shortest forms
[3]155
156
157############################################
158# Build process. Actual work is done here. #
159############################################
160
[272]161all: clean small large
[145]162 @echo All done!
[3]163
[366]164small: at xtplus xt jride_8k 386_8k
[294]165 @echo All 8 kiB binaries built!
[272]166
167large: at_large xtplus_large xt_large
[294]168 @echo All 15 kiB binaries built!
[272]169
[3]170at:
[80]171 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[272]172 @echo * 8k AT version "$(TARGET)_at.bin" built.
[3]173
[238]174at_large:
175 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[272]176 @echo *15k AT version "$(TARGET)_atl.bin" built.
[238]177
[3]178xtplus:
[80]179 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[294]180 @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
[3]181
[238]182xtplus_large:
183 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[294]184 @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
[238]185
[3]186xt:
[80]187 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[272]188 @echo * 8k XT version "$(TARGET)_xt.bin" built.
[3]189
[238]190xt_large:
191 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[272]192 @echo *15k XT version "$(TARGET)_xtl.bin" built.
[277]193
[272]194jride_8k:
195 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_JRIDE_8K) -l"$(TARGET)_jr8k.lst" -o"$(TARGET)_jr8k.bin"
196 @echo * 8k JR-IDE/ISA version "$(TARGET)_jr8k.bin" built.
[238]197
[366]198386_8k:
199 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
200 @echo * 8k 386 version "$(TARGET)_386.bin" built.
201
[322]202strings: src\Strings.asm
203 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_XT) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
204 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
205 @echo StringsCompressed.asm updated!
[252]206
[3]207clean:
208 @$(RM) $(BUILD_DIR)\*.*
209 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[186]210
[294]211checksum: all
[240]212 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
213 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
214 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
[203]215 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
216 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
217 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
[272]218 @perl ..\tools\checksum.pl $(TARGET)_jr8k.bin $(ROMSIZE)
[369]219 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
[203]220
[252]221xt_unused: xt
[370]222 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
223 @perl ..\tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
[194]224
Note: See TracBrowser for help on using the repository browser.