source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/makefile@ 390

Last change on this file since 390 was 389, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Made makefile a little bit more readable.
File size: 9.5 KB
RevLine 
[379]1##################################################################################################
2# Makefile to build XTIDE Universal BIOS. #
3# #
4# Valid makefile targets are: #
[389]5# all Removes existing files and builds binary files in \Build #
6# small Builds 8 kiB binaries only (without checksum) #
7# large Builds 15 kiB binaries only (without checksum) #
8# clean Removes all files from \Build #
9# checksum* Builds all and then generates checksum byte to all binary files #
10# strings* Compress src\Strings.asm to src\StringsCompressed.asm #
[379]11# #
12# * at the end of target name means that Perl is required for the job. #
13# Build directory must be created manually if it does not exist. #
14# #
15# #
16# Following modules can be included or excluded: #
17# MODULE_ADVANCED_ATA Native support for some VLB IDE controllers #
[380]18# MODULE_BOOT_MENU Boot Menu for selection of drive to boot from #
19# MODULE_EBIOS Enhanced functions for accessing drives over 8.4 GB #
[379]20# MODULE_JRIDE Support for JR-IDE/ISA #
21# MODULE_SERIAL Virtual hard disks using serial port #
[380]22# MODULE_SERIAL_FLOPPY Virtual floppy drives using serial port (requires MODULE_SERIAL) #
23# MODULE_STRINGS_COMPRESSED Use compressed strings to save space #
[379]24# #
25# Not modules but these affect the assembly: #
[380]26# ELIMINATE_CGA_SNOW Prevents CGA snowing at the cost of a few bytes #
[379]27# USE_186 Use instructions supported by 80188/80186 and V20/V30 and later #
28# USE_286 Use instructions supported by 286 and later #
29# USE_386 Use instructions supported by 386 and later #
30# USE_AT Use features supported on AT and later systems (not available on XT) #
31# #
32##################################################################################################
[3]33
34###########################################
35# Source files and destination executable #
36###########################################
37
38# Assembly source code file (*.asm):
39SRC_ASM = Src/Main.asm
40
41# Program executable file name without extension:
42PROG = ide
43
44
45#######################################
46# Destination and include directories #
47#######################################
48
49# Directory where binary file will be compiled to
50BUILD_DIR = Build
51
52# Subdirectories where included files are:
53HEADERS = Inc/
[363]54HEADERS += Inc/Controllers/
[3]55HEADERS += Src/
56HEADERS += Src/Boot/
57HEADERS += Src/Handlers/
58HEADERS += Src/Handlers/Int13h/
[165]59HEADERS += Src/Handlers/Int13h/EBIOS/
60HEADERS += Src/Handlers/Int13h/Tools/
[150]61HEADERS += Src/Device/
62HEADERS += Src/Device/IDE/
[238]63HEADERS += Src/Device/MemoryMappedIDE/
[150]64HEADERS += Src/Device/Serial/
[3]65HEADERS += Src/Initialization/
66HEADERS += Src/Libraries/
67HEADERS += Src/VariablesAndDPTs/
68
[88]69# Subdirectories where library files are:
70LIBS = ../Assembly_Library/Inc/
71LIBS += ../Assembly_Library/Src/
72LIBS += ../Assembly_Library/Src/Display/
73LIBS += ../Assembly_Library/Src/File/
74LIBS += ../Assembly_Library/Src/Keyboard/
75LIBS += ../Assembly_Library/Src/Menu/
76LIBS += ../Assembly_Library/Src/Menu/Dialog/
77LIBS += ../Assembly_Library/Src/String/
78LIBS += ../Assembly_Library/Src/Time/
79LIBS += ../Assembly_Library/Src/Util/
[277]80LIBS += ../Assembly_Library/Src/Serial/
[88]81LIBS += ../XTIDE_Universal_BIOS/Inc/
82HEADERS += $(LIBS)
[3]83
[88]84
[3]85#################################################################
86# Assembler preprocessor defines. #
87#################################################################
[389]88DEFINES_COMMON = MODULE_BOOT_MENU MODULE_EBIOS MODULE_STRINGS_COMPRESSED
89
[272]90DEFINES_XT = ELIMINATE_CGA_SNOW MODULE_SERIAL MODULE_SERIAL_FLOPPY
91DEFINES_XTPLUS = ELIMINATE_CGA_SNOW USE_186 MODULE_SERIAL MODULE_SERIAL_FLOPPY
[366]92DEFINES_AT = USE_286 USE_AT MODULE_SERIAL MODULE_SERIAL_FLOPPY
[389]93
[366]94DEFINES_XT_LARGE = $(DEFINES_XT) MODULE_JRIDE MODULE_ADVANCED_ATA
95DEFINES_XTPLUS_LARGE = $(DEFINES_XTPLUS) MODULE_JRIDE MODULE_ADVANCED_ATA
96DEFINES_AT_LARGE = $(DEFINES_AT) MODULE_JRIDE MODULE_ADVANCED_ATA
[389]97
[272]98DEFINES_JRIDE_8K = ELIMINATE_CGA_SNOW MODULE_JRIDE
[366]99DEFINES_386_8K = USE_386 USE_AT MODULE_ADVANCED_ATA
[3]100
101
102###################
103# Other variables #
104###################
105
[239]106# Target size of the ROM, used in main.asm for number of 512B blocks and by checksum Perl script below
107ROMSIZE = 8192
108ROMSIZE_LARGE = 15360
109
[3]110# Add -D in front of every preprocessor define declaration
[389]111DEFS = $(DEFINES_COMMON:%=-D%)
[239]112DEFS_XT = $(DEFINES_XT:%=-D%) -DROMSIZE=$(ROMSIZE)
113DEFS_XTPLUS = $(DEFINES_XTPLUS:%=-D%) -DROMSIZE=$(ROMSIZE)
114DEFS_AT = $(DEFINES_AT:%=-D%) -DROMSIZE=$(ROMSIZE)
115DEFS_XT_LARGE = $(DEFINES_XT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
116DEFS_XTPLUS_LARGE = $(DEFINES_XTPLUS_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
117DEFS_AT_LARGE = $(DEFINES_AT_LARGE:%=-D%) -DROMSIZE=$(ROMSIZE_LARGE)
[272]118DEFS_JRIDE_8K = $(DEFINES_JRIDE_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
[366]119DEFS_386_8K = $(DEFINES_386_8K:%=-D%) -DROMSIZE=$(ROMSIZE)
[3]120
121# Add -I in front of all header directories
122IHEADERS = $(HEADERS:%=-I%)
123
[145]124# Path + target file to be built
[3]125TARGET = $(BUILD_DIR)/$(PROG)
126
127#########################
128# Compilers and linkers #
129#########################
130
131# Make
132MAKE = mingw32-make.exe
133
134# Assembler
[188]135AS = nasm.exe
[3]136
137# use this command to erase files.
138RM = -del /Q
139
140
141#############################
142# Compiler and linker flags #
143#############################
144
145# Assembly compiler flags
146ASFLAGS = -f bin # Produce binary object files
147ASFLAGS += $(DEFS) # Preprocessor defines
148ASFLAGS += $(IHEADERS) # Set header file directory paths
149ASFLAGS += -Worphan-labels # Warn about labels without colon
[379]150ASFLAGS += -Ox # Optimize operands to their shortest forms
[3]151
152
153############################################
154# Build process. Actual work is done here. #
155############################################
156
[272]157all: clean small large
[145]158 @echo All done!
[3]159
[366]160small: at xtplus xt jride_8k 386_8k
[294]161 @echo All 8 kiB binaries built!
[272]162
163large: at_large xtplus_large xt_large
[294]164 @echo All 15 kiB binaries built!
[272]165
[3]166at:
[80]167 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT) -l"$(TARGET)_at.lst" -o"$(TARGET)_at.bin"
[272]168 @echo * 8k AT version "$(TARGET)_at.bin" built.
[3]169
[238]170at_large:
171 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_AT_LARGE) -l"$(TARGET)_atl.lst" -o"$(TARGET)_atl.bin"
[272]172 @echo *15k AT version "$(TARGET)_atl.bin" built.
[238]173
[3]174xtplus:
[80]175 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS) -l"$(TARGET)_xtp.lst" -o"$(TARGET)_xtp.bin"
[294]176 @echo * 8k XT Plus version "$(TARGET)_xtp.bin" built.
[3]177
[238]178xtplus_large:
179 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XTPLUS_LARGE) -l"$(TARGET)_xtpl.lst" -o"$(TARGET)_xtpl.bin"
[294]180 @echo *15k XT Plus version "$(TARGET)_xtpl.bin" built.
[238]181
[3]182xt:
[80]183 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -l"$(TARGET)_xt.lst" -o"$(TARGET)_xt.bin"
[272]184 @echo * 8k XT version "$(TARGET)_xt.bin" built.
[3]185
[238]186xt_large:
187 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT_LARGE) -l"$(TARGET)_xtl.lst" -o"$(TARGET)_xtl.bin"
[272]188 @echo *15k XT version "$(TARGET)_xtl.bin" built.
[277]189
[272]190jride_8k:
191 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_JRIDE_8K) -l"$(TARGET)_jr8k.lst" -o"$(TARGET)_jr8k.bin"
192 @echo * 8k JR-IDE/ISA version "$(TARGET)_jr8k.bin" built.
[238]193
[366]194386_8k:
195 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_386_8K) -l"$(TARGET)_386.lst" -o"$(TARGET)_386.bin"
196 @echo * 8k 386 version "$(TARGET)_386.bin" built.
197
[322]198strings: src\Strings.asm
199 @$(AS) src\Strings.asm $(ASFLAGS) $(DEFS_XT) -DCHECK_FOR_UNUSED_ENTRYPOINTS -DMODULE_STRINGS_COMPRESSED_PRECOMPRESS -o build\Strings.bin -l build\StringsPrecompress.lst
200 @perl ..\tools\StringsCompress.pl < build\StringsPrecompress.lst > src\StringsCompressed.asm
201 @echo StringsCompressed.asm updated!
[252]202
[3]203clean:
204 @$(RM) $(BUILD_DIR)\*.*
205 @echo Deleted "(*.*)" from "$(BUILD_DIR)/"
[186]206
[294]207checksum: all
[240]208 @perl ..\tools\checksum.pl $(TARGET)_atl.bin $(ROMSIZE_LARGE)
209 @perl ..\tools\checksum.pl $(TARGET)_xtpl.bin $(ROMSIZE_LARGE)
210 @perl ..\tools\checksum.pl $(TARGET)_xtl.bin $(ROMSIZE_LARGE)
[203]211 @perl ..\tools\checksum.pl $(TARGET)_at.bin $(ROMSIZE)
212 @perl ..\tools\checksum.pl $(TARGET)_xtp.bin $(ROMSIZE)
213 @perl ..\tools\checksum.pl $(TARGET)_xt.bin $(ROMSIZE)
[272]214 @perl ..\tools\checksum.pl $(TARGET)_jr8k.bin $(ROMSIZE)
[369]215 @perl ..\tools\checksum.pl $(TARGET)_386.bin $(ROMSIZE)
[203]216
[252]217xt_unused: xt
[370]218 @$(AS) "$(SRC_ASM)" $(ASFLAGS) $(DEFS_XT) -o"$(TARGET)_xt_unused.asm" -E -DCHECK_FOR_UNUSED_ENTRYPOINTS
219 @perl ..\tools\unused.pl $(TARGET)_xt.lst $(TARGET)_xt_unused.asm
[194]220
Note: See TracBrowser for help on using the repository browser.