source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/RamVars.asm@ 366

Last change on this file since 366 was 364, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Advanced ATA Module variables are now kept in DPTs.
  • Forced full mode when using Advanced ATA Module.
File size: 5.1 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Functions for accessings RAMVARS.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Initializes RAMVARS.
9; Drive detection can be started after this function returns.
10;
11; RamVars_Initialize
12; Parameters:
13; Nothing
14; Returns:
15; DS: RAMVARS segment
16; Corrupts registers:
17; AX, CX, DI
18;--------------------------------------------------------------------
19RamVars_Initialize:
20 push es
21 ; Fall to .StealMemoryForRAMVARS
22
23;--------------------------------------------------------------------
24; .StealMemoryForRAMVARS
25; Parameters:
26; Nothing
27; Returns:
28; DS: RAMVARS segment
29; Corrupts registers:
30; AX
31;--------------------------------------------------------------------
32.StealMemoryForRAMVARS:
33 ; Always steal memory when using Advanced ATA module since it
34 ; uses larger DPTs
35%ifndef MODULE_ADVANCED_ATA
36 mov ax, LITE_MODE_RAMVARS_SEGMENT
37 test BYTE [cs:ROMVARS.wFlags], FLG_ROMVARS_FULLMODE
38 jz SHORT .InitializeRamvars ; No need to steal RAM
39%endif
40
41 LOAD_BDA_SEGMENT_TO ds, ax, ! ; Zero AX
42 mov al, [cs:ROMVARS.bStealSize]
43 sub [BDA.wBaseMem], ax
44 mov ax, [BDA.wBaseMem]
45 eSHL_IM ax, 6 ; Segment to first stolen kB (*=40h)
46 ; Fall to .InitializeRamvars
47
48;--------------------------------------------------------------------
49; .InitializeRamvars
50; Parameters:
51; AX: RAMVARS segment
52; Returns:
53; DS: RAMVARS segment
54; Corrupts registers:
55; AX, CX, DI, ES
56;--------------------------------------------------------------------
57.InitializeRamvars:
58 mov ds, ax
59 mov es, ax
60 mov cx, RAMVARS_size
61 xor di, di
62 call Memory_ZeroESDIwithSizeInCX
63 mov WORD [RAMVARS.wSignature], RAMVARS_SIGNATURE
64 ; Fall to .InitializeDriveTranslationAndReturn
65
66;--------------------------------------------------------------------
67; .InitializeDriveTranslationAndReturn
68; Parameters:
69; DS: RAMVARS segment
70; Returns:
71; Nothing
72; Corrupts registers:
73; AX
74;--------------------------------------------------------------------
75.InitializeDriveTranslationAndReturn:
76 pop es
77 jmp DriveXlate_Reset
78
79
80;--------------------------------------------------------------------
81; Returns segment to RAMVARS.
82; RAMVARS might be located at the top of interrupt vectors (0030:0000h)
83; or at the top of system base RAM.
84;
85; RamVars_GetSegmentToDS
86; Parameters:
87; Nothing
88; Returns:
89; DS: RAMVARS segment
90; Corrupts registers:
91; DI
92;--------------------------------------------------------------------
93ALIGN JUMP_ALIGN
94RamVars_GetSegmentToDS:
95 test BYTE [cs:ROMVARS.wFlags], FLG_ROMVARS_FULLMODE
96 jnz SHORT .GetStolenSegmentToDS
97%ifndef USE_186
98 mov di, LITE_MODE_RAMVARS_SEGMENT
99 mov ds, di
100%else
101 push LITE_MODE_RAMVARS_SEGMENT
102 pop ds
103%endif
104 ret
105
106ALIGN JUMP_ALIGN
107.GetStolenSegmentToDS:
108 LOAD_BDA_SEGMENT_TO ds, di
109 mov di, [BDA.wBaseMem] ; Load available base memory size in kB
110 eSHL_IM di, 6 ; Segment to first stolen kB (*=40h)
111ALIGN JUMP_ALIGN
112.LoopStolenKBs:
113 mov ds, di ; EBDA segment to DS
114 add di, BYTE 64 ; DI to next stolen kB
115 cmp WORD [RAMVARS.wSignature], RAMVARS_SIGNATURE
116 jne SHORT .LoopStolenKBs ; Loop until sign found (always found eventually)
117 ret
118
119
120;--------------------------------------------------------------------
121; RamVars_GetHardDiskCountFromBDAtoAX
122; Parameters:
123; DS: RAMVARS segment
124; Returns:
125; AX: Total hard disk count
126; Corrupts registers:
127; CX
128;--------------------------------------------------------------------
129ALIGN JUMP_ALIGN
130RamVars_GetHardDiskCountFromBDAtoAX:
131 call RamVars_GetCountOfKnownDrivesToAX
132 push ds
133 LOAD_BDA_SEGMENT_TO ds, cx
134 mov cl, [BDA.bHDCount]
135 MAX_U al, cl
136 pop ds
137 ret
138
139;--------------------------------------------------------------------
140; RamVars_GetCountOfKnownDrivesToAX
141; Parameters:
142; DS: RAMVARS segment
143; Returns:
144; AX: Total hard disk count
145; Corrupts registers:
146; None
147;--------------------------------------------------------------------
148ALIGN JUMP_ALIGN
149RamVars_GetCountOfKnownDrivesToAX:
150 mov ax, [RAMVARS.wDrvCntAndFirst]
151 add al, ah
152 and al, 7fh
153 cbw
154 ret
155
156;--------------------------------------------------------------------
157; RamVars_GetIdeControllerCountToCX
158; Parameters:
159; Nothing
160; Returns:
161; CX: Number of IDE controllers to handle
162; Corrupts registers:
163; Nothing
164;--------------------------------------------------------------------
165ALIGN JUMP_ALIGN
166RamVars_GetIdeControllerCountToCX:
167 eMOVZX cx, [cs:ROMVARS.bIdeCnt]
168 ret
169
170%ifdef MODULE_SERIAL_FLOPPY
171;--------------------------------------------------------------------
172; RamVars_UnpackFlopCntAndFirstToAL
173; Parameters:
174; Nothing
175; Returns:
176; AL: First floppy drive number supported
177; CF: Number of floppy drives supported (clear = 1, set = 2)
178; SF: Emulating drives (clear = yes, set = no)
179; Corrupts registers:
180; Nothing
181;--------------------------------------------------------------------
182ALIGN JUMP_ALIGN
183RamVars_UnpackFlopCntAndFirstToAL:
184 mov al, [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst]
185 sar al, 1
186 ret
187%endif
Note: See TracBrowser for help on using the repository browser.