source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/FindDPT.asm@ 255

Last change on this file since 255 was 233, checked in by gregli@…, 13 years ago

Serial Port: split single byte port and baud into two bytes, taking advantage of the two bytes in DPT_SERIAL, which supports more serial baud rates and in particular fixed a bug where a 4x client machine couldn't talk to a 115.2K server machine. This is a wide change, touching lots of files, but most are shallow changes. DetectPrint.asm took the most significant changes, now it calculates the baud rate to display instead of using characters provided by the Configurator. The Configurator now has a new menu flag, FLG_MENUITEM_CHOICESTRINGS, for specifying that values are not linear and they should be lookedup rather than indexed. Finally, another important bug fixed here is that in some error cases, the serial port code could get into an infinite loop waiting ont the hardware; now it has a timeout.
File size: 5.9 KB
RevLine 
[150]1; Project name : XTIDE Universal BIOS
[3]2; Description : Functions for finding Disk Parameter Table.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Finds pointer to first unused Disk Parameter Table.
9;
[150]10; FindDPT_ForNewDriveToDSDI
[3]11; Parameters:
12; DS: RAMVARS segment
13; Returns:
14; DS:DI: Ptr to first unused DPT
15; Corrupts registers:
[150]16; DL
17;--------------------------------------------------------------------
18ALIGN JUMP_ALIGN
19FindDPT_ForNewDriveToDSDI:
20 mov dl, [RAMVARS.bFirstDrv]
21 add dl, [RAMVARS.bDrvCnt]
22 ; Fall to FindDPT_ForDriveNumber
23
24
25;--------------------------------------------------------------------
26; Finds Disk Parameter Table for drive number.
27; IDE Base Port address will be stored to RAMVARS if correct DPT is found.
28;
29; FindDPT_ForDriveNumber
30; Parameters:
31; DL: Drive number
32; DS: RAMVARS segment
33; Returns:
34; DS:DI: Ptr to DPT
35; Corrupts registers:
[3]36; Nothing
37;--------------------------------------------------------------------
38ALIGN JUMP_ALIGN
[150]39FindDPT_ForDriveNumber:
40 push dx
[161]41 xchg di, ax ; Save the contents of AX in DI
[3]42
[150]43 mov al, LARGEST_DPT_SIZE
44 sub dl, [RAMVARS.bFirstDrv]
45 mul dl
46 add ax, BYTE RAMVARS_size
[3]47
[161]48 xchg di, ax ; Restore AX and put result in DI
[150]49 pop dx
50 ret
51
[3]52;--------------------------------------------------------------------
53; Finds Disk Parameter Table for
54; Master or Slave drive at wanted port.
55;
[150]56; FindDPT_ToDSDIForIdeMasterAtPortDX
57; FindDPT_ToDSDIForIdeSlaveAtPortDX
[3]58; Parameters:
59; DX: IDE Base Port address
60; DS: RAMVARS segment
61; Returns:
62; DL: Drive number (if DPT found)
63; DS:DI: Ptr to DPT
64; CF: Set if wanted DPT found
65; Cleared if DPT not found
66; Corrupts registers:
[150]67; SI
[200]68;
69; Converted to macros since there is only once call site for each of these
70;
[3]71;--------------------------------------------------------------------
[200]72
73%macro FindDPT_ToDSDIForIdeMasterAtPortDX 0
[152]74 mov si, IterateToMasterAtPortCallback
[200]75 call IterateAllDPTs
76%endmacro
[3]77
[200]78%macro FindDPT_ToDSDIForIdeSlaveAtPortDX 0
[152]79 mov si, IterateToSlaveAtPortCallback
[200]80 call IterateAllDPTs
81%endmacro
[3]82
[200]83
[3]84;--------------------------------------------------------------------
85; Iteration callback for finding DPT using
86; IDE base port for Master or Slave drive.
87;
[152]88; IterateToSlaveAtPortCallback
89; IterateToMasterAtPortCallback
[3]90; Parameters:
[150]91; CH: Drive number
[3]92; DX: IDE Base Port address
93; DS:DI: Ptr to DPT to examine
94; Returns:
95; DL: Drive number if correct DPT
96; CF: Set if wanted DPT found
97; Cleared if wrong DPT
98; Corrupts registers:
99; Nothing
100;--------------------------------------------------------------------
101ALIGN JUMP_ALIGN
[152]102IterateToSlaveAtPortCallback:
[158]103 test BYTE [di+DPT.bFlagsLow], FLGL_DPT_SLAVE ; Clears CF
[150]104 jnz SHORT CompareBasePortAddress
105 ret ; Wrong DPT
[3]106
107ALIGN JUMP_ALIGN
[152]108IterateToMasterAtPortCallback:
[158]109 test BYTE [di+DPT.bFlagsLow], FLGL_DPT_SLAVE
[150]110 jnz SHORT ReturnWrongDPT ; Return if slave drive
[3]111
[150]112CompareBasePortAddress:
[3]113 push bx
[150]114 eMOVZX bx, BYTE [di+DPT.bIdevarsOffset] ; CS:BX now points to IDEVARS
115 cmp dx, [cs:bx+IDEVARS.wPort] ; Wanted port?
[3]116 pop bx
[150]117 jne SHORT ReturnWrongDPT
118 mov dl, ch ; Return drive number in DL
[200]119
120ReturnRightDPT:
[150]121 stc ; Set CF since wanted DPT
[3]122 ret
[152]123
124
125;--------------------------------------------------------------------
[233]126; IterateToDptWithFlagsHighInBL
[152]127; Parameters:
128; DS:DI: Ptr to DPT to examine
[233]129; BL: Bit(s) to test in DPT.bFlagsHigh
[152]130; Returns:
131; CF: Set if wanted DPT found
132; Cleared if wrong DPT
133; Corrupts registers:
134; Nothing
135;--------------------------------------------------------------------
136ALIGN JUMP_ALIGN
[233]137IterateToDptWithFlagsHighInBL:
138 test BYTE [di+DPT.bFlagsHigh], bl ; Clears CF (but we need the clc
139 ; below anyway for callers above)
[200]140 jnz SHORT ReturnRightDPT
141
[150]142ReturnWrongDPT:
[152]143 clc ; Clear CF since wrong DPT
[3]144 ret
145
146;--------------------------------------------------------------------
[233]147; FindDPT_ToDSDIforSerialDevice
[161]148; Parameters:
149; DS: RAMVARS segment
150; Returns:
151; DS:DI: Ptr to DPT
152; CF: Set if wanted DPT found
153; Cleared if DPT not found
154; Corrupts registers:
[203]155; SI
[161]156;--------------------------------------------------------------------
[233]157ALIGN JUMP_ALIGN
158FindDPT_ToDSDIforSerialDevice:
159 mov bl, FLGH_DPT_SERIAL_DEVICE
160; fall-through
161
162;--------------------------------------------------------------------
163; FindDPT_ToDSDIforFlagsHigh
164; Parameters:
165; DS: RAMVARS segment
166; BL: Bit(s) to test in DPT.bFlagsHigh
167; Returns:
168; DS:DI: Ptr to DPT
169; CF: Set if wanted DPT found
170; Cleared if DPT not found
171; Corrupts registers:
172; SI
173;--------------------------------------------------------------------
[161]174ALIGN JUMP_ALIGN
[233]175FindDPT_ToDSDIforFlagsHighInBL:
176 mov si, IterateToDptWithFlagsHighInBL
[161]177 ; Fall to IterateAllDPTs
178
179;--------------------------------------------------------------------
[3]180; Iterates all Disk Parameter Tables.
181;
[150]182; IterateAllDPTs
[3]183; Parameters:
[152]184; AX,BX,DX: Parameters to callback function
185; CS:SI: Ptr to callback function
186; DS: RAMVARS segment
[3]187; Returns:
[152]188; DS:DI: Ptr to wanted DPT (if found)
189; CF: Set if wanted DPT found
[200]190; Cleared if DPT not found, or no DPTs present
[3]191; Corrupts registers:
[150]192; Nothing unless corrupted by callback function
[3]193;--------------------------------------------------------------------
194ALIGN JUMP_ALIGN
[150]195IterateAllDPTs:
[3]196 push cx
[150]197 mov cx, [RAMVARS.wDrvCntAndFirst]
[200]198 jcxz .NotFound ; Return if no drives
[152]199 mov di, RAMVARS_size ; Point DS:DI to first DPT
[3]200ALIGN JUMP_ALIGN
201.LoopWhileDPTsLeft:
202 call si ; Is wanted DPT?
[150]203 jc SHORT .AllDptsIterated ; If so, return
204 inc ch ; Increment drive number
205 add di, BYTE LARGEST_DPT_SIZE ; Point to next DPT
206 dec cl ; Decrement drives left
207 jnz SHORT .LoopWhileDPTsLeft
[200]208.NotFound:
[3]209 clc ; Clear CF since DPT not found
210ALIGN JUMP_ALIGN
[150]211.AllDptsIterated:
[3]212 pop cx
213 ret
Note: See TracBrowser for help on using the repository browser.