source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/DrvDetectInfo.asm @ 399

Last change on this file since 399 was 399, checked in by krille_n_@…, 12 years ago

Changes:

  • Added Power Management (Standby Timer) support to the BIOS and made it part of an optional module (MODULE_FEATURE_SETS). The total amount of ROM space used by this feature is 37 bytes. UNTESTED
  • Size optimizations (mostly inlining of procedures) and fixed a few bugs in AH9h_HInit.asm:
    1. DPT_ATA.bInitError would be cleared only if MODULE_SERIAL was not defined.
    2. The FLG_INITERROR_FAILED_TO_SET_BLOCK_MODE flag could never be set.
    3. InitializeBlockMode could potentially loop forever if there was an error.
  • Removed some odd looking code in .PushResetStatus in BootMenuPrintCfg.asm
  • Made some changes to XTIDECFG so it can be built.
File size: 2.7 KB
RevLine 
[392]1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for generating and accessing drive
3;                   information to be displayed on boot menu.
4
5;
[399]6; XTIDE Universal BIOS and Associated Tools
[392]7; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
8;
9; This program is free software; you can redistribute it and/or modify
10; it under the terms of the GNU General Public License as published by
11; the Free Software Foundation; either version 2 of the License, or
12; (at your option) any later version.
[399]13;
[392]14; This program is distributed in the hope that it will be useful,
15; but WITHOUT ANY WARRANTY; without even the implied warranty of
16; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17; GNU General Public License for more details.
[399]18; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
[392]19;
[399]20
[392]21; Section containing code
22SECTION .text
23
24;--------------------------------------------------------------------
[397]25; Creates new DRVDETECTINFO struct for detected hard disk.
[392]26;
[397]27; DriveDetectInfo_CreateForHardDisk
[392]28;   Parameters:
29;       DL:     Drive number
30;       DS:DI:  Ptr to Disk Parameter Table
31;       ES:SI:  Ptr to 512-byte ATA information read from the drive
32;   Returns:
[397]33;       ES:BX:  Ptr to DRVDETECTINFO (if successful)
[392]34;   Corrupts registers:
35;       AX, BX, CX, DX, DI
36;--------------------------------------------------------------------
[397]37DriveDetectInfo_CreateForHardDisk:
38    call    DriveDetectInfo_ConvertDPTtoBX      ; ES:BX now points to new DRVDETECTINFO
[392]39
40    ; Store Drive Name
41    push    ds                                  ; Preserve RAMVARS
42    push    si
43
44    push    es                                  ; ES copied to DS
45    pop     ds
46
[399]47    add     si, BYTE ATA1.strModel              ; DS:SI now points drive name (Clears CF)
48    lea     di, [bx+DRVDETECTINFO.szDrvName]    ; ES:DI now points to name destination
[392]49    mov     cx, MAX_HARD_DISK_NAME_LENGTH / 2   ; Max number of WORDs allowed
50.CopyNextWord:
51    lodsw
52    xchg    al, ah                              ; Change endianness
53    stosw
54    loop    .CopyNextWord
[399]55    xchg    cx, ax                              ; Zero AX (CF already cleared from the ADD above)
[392]56    stosw                                       ; Terminate with NULL
57
58    pop     si
59    pop     ds
[399]60
[392]61    ret
62
63
64;--------------------------------------------------------------------
[397]65; Returns offset to DRVDETECTINFO based on DPT pointer.
[392]66;
[397]67; DriveDetectInfo_ConvertDPTtoBX
[392]68;   Parameters:
69;       DS:DI:  DPT Pointer
70;   Returns:
[397]71;       BX:     Offset to DRVDETECTINFO struct
[392]72;   Corrupts registers:
73;       AX
74;--------------------------------------------------------------------
[397]75DriveDetectInfo_ConvertDPTtoBX:
[399]76    lea     ax, [di-RAMVARS_size]                   ; subtract off base of DPTs
[397]77    mov     bl, DPT_DRVDETECTINFO_SIZE_MULTIPLIER   ; DRVDETECTINFO are a whole number multiple of DPT size
[399]78    mul     bl
[397]79    add     ax, BOOTVARS.rgDrvDetectInfo            ; add base of DRVDETECTINFO
[399]80    xchg    bx, ax
81    ret
Note: See TracBrowser for help on using the repository browser.