source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm @ 550

Last change on this file since 550 was 550, checked in by aitotat@…, 11 years ago

Changes to XTIDE Universal BIOS:

  • CREATE_COMPATIBLE_DPT is now MODULE_COMPATIBLE_TABLES.
  • DPTs pointed by INT 41h and INT 46h are now swapped when swapping drives 81h and 80h.
  • Block mode commands are no longer used when block size is set to 1 with AH=24h.
File size: 9.6 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for creating Disk Parameter Table.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Creates new Disk Parameter Table for detected hard disk.
25; Drive is then fully accessible using any BIOS function.
26;
27; CreateDPT_FromAtaInformation
28;   Parameters:
29;       BH:     Drive Select byte for Drive and Head Register
30;       DX:     Autodetected port (for devices that support autodetection)
31;       ES:SI:  Ptr to 512-byte ATA information read from the drive
32;       CS:BP:  Ptr to IDEVARS for the controller
33;       DS:     RAMVARS segment
34;       ES:     BDA Segment
35;   Returns:
36;       DS:DI:  Ptr to Disk Parameter Table (if successful)
37;       CF:     Cleared if DPT created successfully
38;               Set if any error
39;   Corrupts registers:
40;       AX, BX, CX, DX
41;--------------------------------------------------------------------
42CreateDPT_FromAtaInformation:
43    call    FindDPT_ForNewDriveToDSDI
44    ; Fall to .InitializeDPT
45
46;--------------------------------------------------------------------
47; .InitializeDPT
48;   Parameters:
49;       BH:     Drive Select byte for Drive and Head Register
50;       DX:     Autodetected port (for devices that support autodetection)
51;       DS:DI:  Ptr to Disk Parameter Table
52;       CS:BP:  Ptr to IDEVARS for the controller
53;   Returns:
54;       Nothing
55;   Corrupts registers:
56;       AX
57;--------------------------------------------------------------------
58.InitializeDPT:
59    call    CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
60    ; Fall to .StoreDriveSelectAndDriveControlByte
61
62;--------------------------------------------------------------------
63; .StoreDriveSelectAndDriveControlByte
64;   Parameters:
65;       BH:     Drive Select byte for Drive and Head Register
66;       DS:DI:  Ptr to Disk Parameter Table
67;       ES:SI:  Ptr to 512-byte ATA information read from the drive
68;       CS:BP:  Ptr to IDEVARS for the controller
69;   Returns:
70;       Nothing
71;   Corrupts registers:
72;       AX
73;--------------------------------------------------------------------
74.StoreDriveSelectAndDriveControlByte:
75    mov     al, bh
76    and     ax, BYTE FLG_DRVNHEAD_DRV       ; AL now has Master/Slave bit
77%ifdef MODULE_IRQ
78    cmp     [cs:bp+IDEVARS.bIRQ], ah        ; Interrupts enabled?
79    jz      SHORT .StoreFlags               ;  If not, do not set interrupt flag
80    or      al, FLGL_DPT_ENABLE_IRQ
81.StoreFlags:
82%endif
83    mov     [di+DPT.wFlags], ax
84    ; Fall to .StoreCHSparametersAndAddressingMode
85
86;--------------------------------------------------------------------
87; .StoreCHSparametersAndAddressingMode
88;   Parameters:
89;       DS:DI:  Ptr to Disk Parameter Table
90;       ES:SI:  Ptr to 512-byte ATA information read from the drive
91;       CS:BP:  Ptr to IDEVARS for the controller
92;   Returns:
93;       Nothing
94;   Corrupts registers:
95;       AX, BX, CX, DX
96;--------------------------------------------------------------------
97.StoreCHSparametersAndAddressingMode:
98    ; Apply any user limited values to ATA ID
99    call    AtaID_ModifyESSIforUserDefinedLimitsAndReturnTranslateModeInDX
100
101    ; Translate P-CHS to L-CHS
102    call    AtaGeometry_GetLCHStoAXBLBHfromAtaInfoInESSIwithTranslateModeInDX
103    mov     [di+DPT.wLchsCylinders], ax
104    mov     [di+DPT.wLchsHeadsAndSectors], bx
105    mov     al, dl
106    eSHL_IM al, TRANSLATEMODE_FIELD_POSITION
107    or      cl, al
108
109    ; Store P-CHS and flags
110    call    AtaGeometry_GetPCHStoAXBLBHfromAtaInfoInESSI
111    dec     dl                      ; Set ZF if TRANSLATEMODE_LARGE, SF if TRANSLATEMODE_NORMAL
112    js      SHORT .NothingToChange
113    jz      SHORT .LimitHeadsForLargeAddressingMode
114
115    ; Set LBA bit for Assisted LBA
116    or      cl, FLGL_DPT_LBA
117    jmp     SHORT .NothingToChange
118
119.LimitHeadsForLargeAddressingMode:
120    ; We cannot have 16 P-Heads heads in Revised ECHS mode (8193 or more cylinders)
121    ; but 16 heads are allowed when there are 8192 or less cylinders (ECHS).
122    ; Both of these are LARGE modes so do not confuse with NORMAL mode.
123    call    AtaGeometry_IsDriveSmallEnoughForECHS
124    jc      SHORT .NothingToChange
125    dec     bx                      ; Adjust 16 P-Heads to 15
126
127.NothingToChange:
128    or      [di+DPT.bFlagsLow], cl  ; Shift count and addressing mode
129    mov     [di+DPT.wPchsHeadsAndSectors], bx
130%ifdef MODULE_COMPATIBLE_TABLES OR MODULE_EBIOS
131    ; Store P-Cylinders here for Compatible DPTs when FLGL_DPT_LBA is not set
132    ; or when drive has over 15,482,880 sectors
133    mov     [di+DPT.wPchsCylinders], ax
134%endif
135
136%ifdef MODULE_EBIOS
137    test    cl, FLGL_DPT_LBA
138    jz      SHORT .NoLbaSoNoEBIOS
139
140    ; Store P-Cylinders but only if we have 15,482,880 or less sectors since
141    ; we only need P-Cylinders so we can return it from AH=48h
142    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
143    sub     ax, (MAX_SECTOR_COUNT_TO_RETURN_PCHS+1) & 0FFFFh
144    sbb     dx, (MAX_SECTOR_COUNT_TO_RETURN_PCHS+1) >> 16
145    sbb     bx, BYTE 0
146    jnc     SHORT .StoreNumberOfLbaSectors
147
148    ; Since we might have altered the default P-CHS parameters to be
149    ; presented to the drive (AH=09h), we need to calculate new
150    ; P-Cylinders. It could be read from the ATA ID after
151    ; COMMAND_INITIALIZE_DEVICE_PARAMETERS but that is too much trouble.
152    ; P-Cyls = MIN(16383*16*63, LBA sector count) / (P-Heads * P-Sectors per track)
153    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
154    xchg    cx, ax                          ; Sector count to DX:CX
155    mov     al, [di+DPT.bPchsHeads]
156    mul     BYTE [di+DPT.bPchsSectorsPerTrack]
157    xchg    cx, ax
158    div     cx                              ; AX = new P-Cylinders
159
160    ; We could remove wPchsCylinders from DPT if we calculate it on AH=48h
161    ; (and for compatible DPTs) but that would require extra code so we save ROM space instead.
162    mov     [di+DPT.wPchsCylinders], ax
163
164    ; Store CHS sector count as total sector count. We must not use
165    ; LBA sector count if it is 15,482,880 or less.
166    mul     cx
167    xor     bx, bx
168    jmp     SHORT .StoreTotalSectorsFromBXDXAX
169    ; Fall to .StoreNumberOfLbaSectors
170
171;--------------------------------------------------------------------
172; .StoreNumberOfLbaSectors
173;   Parameters:
174;       DS:DI:  Ptr to Disk Parameter Table
175;       ES:SI:  Ptr to 512-byte ATA information read from the drive
176;       CS:BP:  Ptr to IDEVARS for the controller
177;   Returns:
178;       Nothing
179;   Corrupts registers:
180;       AX, BX, CX, DX
181;--------------------------------------------------------------------
182.StoreNumberOfLbaSectors:
183    ; Store LBA 28/48 total sector count
184    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
185    or      [di+DPT.bFlagsLow], cl      ; LBA48 flag
186.StoreTotalSectorsFromBXDXAX:
187    mov     [di+DPT.twLbaSectors], ax
188    mov     [di+DPT.twLbaSectors+2], dx
189    mov     [di+DPT.twLbaSectors+4], bx
190.NoLbaSoNoEBIOS:
191%endif ; MODULE_EBIOS
192    ; Fall to .StoreDeviceSpecificParameters
193
194;--------------------------------------------------------------------
195; .StoreDeviceSpecificParameters
196;   Parameters:
197;       DS:DI:  Ptr to Disk Parameter Table
198;       ES:SI:  Ptr to 512-byte ATA information read from the drive
199;       CS:BP:  Ptr to IDEVARS for the controller
200;   Returns:
201;       Nothing
202;   Corrupts registers:
203;       AX, BX, CX, DX
204;--------------------------------------------------------------------
205.StoreDeviceSpecificParameters:
206    call    Device_FinalizeDPT
207
208;----------------------------------------------------------------------
209; Update drive counts (hard and floppy)
210;----------------------------------------------------------------------
211
212%ifdef MODULE_SERIAL_FLOPPY
213;
214; These two instructions serve two purposes:
215; 1. If the drive is a floppy drive (CF set), then we effectively increment the counter.
216; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is
217;    effectively discarded.  This is more of a safety check then code that should ever normally be hit (see below).
218;    Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT,
219;    this was necessary.  Now, this situation shouldn't happen in normal operation, for a couple of reasons:
220;       A. xtidecfg always puts configured serial ports at the end of the IDEVARS list
221;       B. the auto serial code is always executed last
222;       C. the serial server always returns floppy drives last
223;
224    adc     byte [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt], 0
225    jnz     .AllDone
226%else
227;
228; Even without floppy support enabled, we shouldn't try to mount a floppy image as a hard disk, which
229; could lead to unpredictable results since no MBR will be present, etc.  The server doesn't know that
230; floppies are supported, so it is important to still fail here if a floppy is seen during the drive scan.
231;
232    jc      .AllDone
233%endif
234
235    inc     BYTE [RAMVARS.bDrvCnt]      ; Increment drive count to RAMVARS
236
237.AllDone:
238    clc
239    ret
240
241
242;--------------------------------------------------------------------
243; CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
244;   Parameters:
245;       DX:     Autodetected port (for devices that support autodetection)
246;       DS:DI:  Ptr to Disk Parameter Table
247;       CS:BP:  Ptr to IDEVARS for the controller
248;   Returns:
249;       Nothing
250;   Corrupts registers:
251;       AX
252;--------------------------------------------------------------------
253CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI:
254    mov     [di+DPT.bIdevarsOffset], bp     ; IDEVARS must start in first 256 bytes of ROM
255    mov     ax, [cs:bp+IDEVARS.wBasePort]
256    mov     [di+DPT.wBasePort], ax
257    ret
Note: See TracBrowser for help on using the repository browser.