source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm @ 542

Last change on this file since 542 was 542, checked in by aitotat@…, 11 years ago

Changes to XTIDE Universal BIOS:

  • Fixed a bug that allowed EBIOS functions for user defined CHS.
  • Simplified user defined CHS and LBA setup a little.
File size: 9.8 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for creating Disk Parameter Table.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Creates new Disk Parameter Table for detected hard disk.
25; Drive is then fully accessible using any BIOS function.
26;
27; CreateDPT_FromAtaInformation
28;   Parameters:
29;       BH:     Drive Select byte for Drive and Head Register
30;       DX:     Autodetected port (for devices that support autodetection)
31;       ES:SI:  Ptr to 512-byte ATA information read from the drive
32;       CS:BP:  Ptr to IDEVARS for the controller
33;       DS:     RAMVARS segment
34;       ES:     BDA Segment
35;   Returns:
36;       DS:DI:  Ptr to Disk Parameter Table (if successful)
37;       CF:     Cleared if DPT created successfully
38;               Set if any error
39;   Corrupts registers:
40;       AX, BX, CX, DX
41;--------------------------------------------------------------------
42CreateDPT_FromAtaInformation:
43    call    FindDPT_ForNewDriveToDSDI
44    ; Fall to .InitializeDPT
45
46;--------------------------------------------------------------------
47; .InitializeDPT
48;   Parameters:
49;       BH:     Drive Select byte for Drive and Head Register
50;       DX:     Autodetected port (for devices that support autodetection)
51;       DS:DI:  Ptr to Disk Parameter Table
52;       CS:BP:  Ptr to IDEVARS for the controller
53;   Returns:
54;       Nothing
55;   Corrupts registers:
56;       AX
57;--------------------------------------------------------------------
58.InitializeDPT:
59    call    CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
60    ; Fall to .StoreDriveSelectAndDriveControlByte
61
62;--------------------------------------------------------------------
63; .StoreDriveSelectAndDriveControlByte
64;   Parameters:
65;       BH:     Drive Select byte for Drive and Head Register
66;       DS:DI:  Ptr to Disk Parameter Table
67;       ES:SI:  Ptr to 512-byte ATA information read from the drive
68;       CS:BP:  Ptr to IDEVARS for the controller
69;   Returns:
70;       Nothing
71;   Corrupts registers:
72;       AX
73;--------------------------------------------------------------------
74.StoreDriveSelectAndDriveControlByte:
75    mov     al, bh
76    and     ax, BYTE FLG_DRVNHEAD_DRV       ; AL now has Master/Slave bit
77%ifdef MODULE_IRQ
78    cmp     [cs:bp+IDEVARS.bIRQ], ah        ; Interrupts enabled?
79    jz      SHORT .StoreFlags               ;  If not, do not set interrupt flag
80    or      al, FLGL_DPT_ENABLE_IRQ
81.StoreFlags:
82%endif
83    mov     [di+DPT.wFlags], ax
84    ; Fall to .StoreCHSparametersAndAddressingMode
85
86;--------------------------------------------------------------------
87; .StoreCHSparametersAndAddressingMode
88;   Parameters:
89;       DS:DI:  Ptr to Disk Parameter Table
90;       ES:SI:  Ptr to 512-byte ATA information read from the drive
91;       CS:BP:  Ptr to IDEVARS for the controller
92;   Returns:
93;       Nothing
94;   Corrupts registers:
95;       AX, BX, CX, DX
96;--------------------------------------------------------------------
97.StoreCHSparametersAndAddressingMode:
98    ; Apply any user limited values to ATA ID
99    call    AtaID_ModifyESSIforUserDefinedLimitsAndReturnTranslateModeInDX
100
101    ; Translate P-CHS to L-CHS
102    call    AtaGeometry_GetLCHStoAXBLBHfromAtaInfoInESSIandTranslateModeInDX
103    mov     [di+DPT.wLchsCylinders], ax
104    mov     [di+DPT.wLchsHeadsAndSectors], bx
105    mov     al, dl
106    eSHL_IM al, TRANSLATEMODE_FIELD_POSITION
107    or      cl, al
108
109    ; Store P-CHS and flags
110    call    AtaGeometry_GetPCHStoAXBLBHfromAtaInfoInESSI
111    dec     dx                      ; Set ZF if TRANSLATEMODE_LARGE, SF if TRANSLATEMODE_NORMAL
112    js      SHORT .NothingToChange
113    jz      SHORT .LimitHeadsForLargeAddressingMode
114
115    or      cl, FLGL_DPT_LBA        ; Set LBA bit for Assisted LBA
116    jmp     SHORT .NothingToChange
117.LimitHeadsForLargeAddressingMode:
118    MIN_U   bl, 15                  ; Cannot have 16 P-Heads in LARGE addressing mode
119.NothingToChange:
120    or      [di+DPT.bFlagsLow], cl  ; Shift count and addressing mode
121    mov     [di+DPT.wPchsHeadsAndSectors], bx
122
123%ifdef MODULE_EBIOS
124    test    cl, FLGL_DPT_LBA
125    jz      SHORT .NoLbaSoNoEBIOS
126
127    ; Store P-Cylinders but only if we have 15,482,880 or less sectors since
128    ; we only need P-Cylinders so we can return it from AH=48h
129    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
130    sub     ax, MAX_SECTOR_COUNT_TO_RETURN_PCHS & 0FFFFh
131    sbb     dx, MAX_SECTOR_COUNT_TO_RETURN_PCHS >> 16
132    sbb     bx, BYTE 0
133    ja      SHORT .StoreNumberOfLbaSectors
134
135    ; Since we might have altered the default P-CHS parameters to be
136    ; presented to the drive (AH=09h), we need to calculate new
137    ; P-Cylinders. It could be read from the ATA ID after
138    ; COMMAND_INITIALIZE_DEVICE_PARAMETERS but that is too much trouble.
139    ; P-Cyls = MIN(16383*16*63, LBA sector count) / (P-Heads * P-Sectors per track)
140    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
141    xchg    cx, ax                          ; Sector count to DX:CX
142    mov     al, [di+DPT.bPchsHeads]
143    mul     BYTE [di+DPT.bPchsSectorsPerTrack]
144    xchg    cx, ax
145    div     cx                              ; AX = new P-Cylinders
146    mov     [di+DPT.wPchsCylinders], ax
147
148    ; Store CHS sector count as total sector count
149    mul     cx
150    xor     bx, bx
151    xor     cx, cx                          ; Clear LBA48 flag
152    jmp     SHORT .StoreTotalSectorsFromBXDXAXandLBA48flagFromCL
153    ; Fall to .StoreNumberOfLbaSectors
154
155;--------------------------------------------------------------------
156; .StoreNumberOfLbaSectors
157;   Parameters:
158;       DS:DI:  Ptr to Disk Parameter Table
159;       ES:SI:  Ptr to 512-byte ATA information read from the drive
160;       CS:BP:  Ptr to IDEVARS for the controller
161;   Returns:
162;       Nothing
163;   Corrupts registers:
164;       AX, BX, CX, DX
165;--------------------------------------------------------------------
166.StoreNumberOfLbaSectors:
167    ; Store LBA 28/48 total sector count
168    call    AtaGeometry_GetLbaSectorCountToBXDXAXfromAtaInfoInESSI
169.StoreTotalSectorsFromBXDXAXandLBA48flagFromCL:
170    or      [di+DPT.bFlagsLow], cl
171    mov     [di+DPT.twLbaSectors], ax
172    mov     [di+DPT.twLbaSectors+2], dx
173    mov     [di+DPT.twLbaSectors+4], bx
174.NoLbaSoNoEBIOS:
175%endif ; MODULE_EBIOS
176    ; Fall to .StoreBlockMode
177
178;--------------------------------------------------------------------
179; .StoreBlockMode
180;   Parameters:
181;       DS:DI:  Ptr to Disk Parameter Table
182;       ES:SI:  Ptr to 512-byte ATA information read from the drive
183;       CS:BP:  Ptr to IDEVARS for the controller
184;   Returns:
185;       Nothing
186;   Corrupts registers:
187;       Nothing
188;--------------------------------------------------------------------
189.StoreBlockMode:
190    cmp     BYTE [es:si+ATA1.bBlckSize], 1  ; Max block size in sectors
191    jbe     SHORT .BlockModeTransfersNotSupported
192    or      BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
193.BlockModeTransfersNotSupported:
194    ; Fall to .StoreDeviceSpecificParameters
195
196;--------------------------------------------------------------------
197; .StoreDeviceSpecificParameters
198;   Parameters:
199;       DS:DI:  Ptr to Disk Parameter Table
200;       ES:SI:  Ptr to 512-byte ATA information read from the drive
201;       CS:BP:  Ptr to IDEVARS for the controller
202;   Returns:
203;       Nothing
204;   Corrupts registers:
205;       AX, BX, CX, DX
206;--------------------------------------------------------------------
207.StoreDeviceSpecificParameters:
208    call    Device_FinalizeDPT
209
210;----------------------------------------------------------------------
211; Update drive counts (hard and floppy)
212;----------------------------------------------------------------------
213
214%ifdef MODULE_SERIAL_FLOPPY
215;
216; These two instructions serve two purposes:
217; 1. If the drive is a floppy drive (CF set), then we effectively increment the counter.
218; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is
219;    effectively discarded.  This is more of a safety check then code that should ever normally be hit (see below).
220;    Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT,
221;    this was necessary.  Now, this situation shouldn't happen in normal operation, for a couple of reasons:
222;       A. xtidecfg always puts configured serial ports at the end of the IDEVARS list
223;       B. the auto serial code is always executed last
224;       C. the serial server always returns floppy drives last
225;
226    adc     byte [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt], 0
227    jnz     .AllDone
228%else
229;
230; Even without floppy support enabled, we shouldn't try to mount a floppy image as a hard disk, which
231; could lead to unpredictable results since no MBR will be present, etc.  The server doesn't know that
232; floppies are supported, so it is important to still fail here if a floppy is seen during the drive scan.
233;
234    jc      .AllDone
235%endif
236
237    inc     BYTE [RAMVARS.bDrvCnt]      ; Increment drive count to RAMVARS
238
239.AllDone:
240    clc
241    ret
242
243
244;--------------------------------------------------------------------
245; CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI
246;   Parameters:
247;       DX:     Autodetected port (for devices that support autodetection)
248;       DS:DI:  Ptr to Disk Parameter Table
249;       CS:BP:  Ptr to IDEVARS for the controller
250;   Returns:
251;       Nothing
252;   Corrupts registers:
253;       AX
254;--------------------------------------------------------------------
255CreateDPT_StoreIdevarsOffsetAndBasePortFromCSBPtoDPTinDSDI:
256    mov     [di+DPT.bIdevarsOffset], bp     ; IDEVARS must start in first 256 bytes of ROM
257
258%ifdef MODULE_8BIT_IDE_ADVANCED
259    call    DetectDrives_DoesIdevarsInCSBPbelongToXTCF
260    jne     SHORT .DeviceUsesPortSpecifiedInIDEVARS
261    mov     [di+DPT.wBasePort], dx
262    ret
263.DeviceUsesPortSpecifiedInIDEVARS:
264%endif ; MODULE_8BIT_IDE_ADVANCED
265
266    mov     ax, [cs:bp+IDEVARS.wBasePort]
267    mov     [di+DPT.wBasePort], ax
268    ret
Note: See TracBrowser for help on using the repository browser.