| [3] | 1 | ; File name : CreateDPT.asm
|
|---|
| 2 | ; Project name : IDE BIOS
|
|---|
| 3 | ; Created date : 12.3.2010
|
|---|
| 4 | ; Last update : 26.4.2010
|
|---|
| 5 | ; Author : Tomi Tilli
|
|---|
| 6 | ; Description : Functions for creating Disk Parameter Table.
|
|---|
| 7 |
|
|---|
| 8 | ; Section containing code
|
|---|
| 9 | SECTION .text
|
|---|
| 10 |
|
|---|
| 11 | ;--------------------------------------------------------------------
|
|---|
| 12 | ; Creates new Disk Parameter Table for detected hard disk.
|
|---|
| 13 | ; Drive is then fully accessible using any BIOS function.
|
|---|
| 14 | ;
|
|---|
| 15 | ; CreateDPT_FromAtaInformation
|
|---|
| 16 | ; Parameters:
|
|---|
| 17 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 18 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 19 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 20 | ; DS: RAMVARS segment
|
|---|
| 21 | ; ES: BDA Segment
|
|---|
| 22 | ; Returns:
|
|---|
| 23 | ; DL: Drive number for new drive
|
|---|
| 24 | ; DS:DI: Ptr to Disk Parameter Table (if succesfull)
|
|---|
| 25 | ; CF: Cleared if DPT created successfully
|
|---|
| 26 | ; Set if any error
|
|---|
| 27 | ; Corrupts registers:
|
|---|
| 28 | ; AX, CX, BX, DH
|
|---|
| 29 | ;--------------------------------------------------------------------
|
|---|
| 30 | ALIGN JUMP_ALIGN
|
|---|
| 31 | CreateDPT_FromAtaInformation:
|
|---|
| 32 | call FindDPT_ForNewDrive ; Get new DPT to DS:DI
|
|---|
| 33 | call CreateDPT_Initialize
|
|---|
| 34 | call CreateDPT_StoreDriveControlByte
|
|---|
| 35 | call CreateDPT_StorePCHS
|
|---|
| 36 | call CreateDPT_StoreLCHS
|
|---|
| 37 | call CreateDPT_StoreAddressing
|
|---|
| 38 | call CreateDPT_StoreBlockMode
|
|---|
| 39 | call CreateDPT_StoreEBIOSSupport
|
|---|
| 40 | jmp CreateDPT_StoreDriveNumberAndUpdateDriveCount
|
|---|
| 41 |
|
|---|
| 42 |
|
|---|
| 43 | ;--------------------------------------------------------------------
|
|---|
| 44 | ; Initializes empty DPT by storing initial values that are not
|
|---|
| 45 | ; read from ATA information.
|
|---|
| 46 | ;
|
|---|
| 47 | ; CreateDPT_Initialize
|
|---|
| 48 | ; Parameters:
|
|---|
| 49 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 50 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 51 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 52 | ; Returns:
|
|---|
| 53 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 54 | ; Set if any error
|
|---|
| 55 | ; Corrupts registers:
|
|---|
| 56 | ; Nothing
|
|---|
| 57 | ;--------------------------------------------------------------------
|
|---|
| 58 | ALIGN JUMP_ALIGN
|
|---|
| 59 | CreateDPT_Initialize:
|
|---|
| 60 | xor ax, ax ; Clear AX and CF
|
|---|
| 61 | mov BYTE [di+DPT.bSize], DPT_size
|
|---|
| 62 | mov BYTE [di+DPT.bDrvNum], al
|
|---|
| 63 | mov BYTE [di+DPT.bFlags], al
|
|---|
| 64 | mov BYTE [di+DPT.bReset], MASK_RESET_ALL
|
|---|
| 65 | mov WORD [di+DPT.bIdeOff], bp
|
|---|
| 66 | mov BYTE [di+DPT.bDrvSel], bh
|
|---|
| 67 | ret
|
|---|
| 68 |
|
|---|
| 69 |
|
|---|
| 70 | ;--------------------------------------------------------------------
|
|---|
| 71 | ; Stores Drive Control Byte for Device Control Register.
|
|---|
| 72 | ;
|
|---|
| 73 | ; CreateDPT_StoreDriveControlByte
|
|---|
| 74 | ; Parameters:
|
|---|
| 75 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 76 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 77 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 78 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 79 | ; Returns:
|
|---|
| 80 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 81 | ; Set if any error
|
|---|
| 82 | ; Corrupts registers:
|
|---|
| 83 | ; AX
|
|---|
| 84 | ;--------------------------------------------------------------------
|
|---|
| 85 | ALIGN JUMP_ALIGN
|
|---|
| 86 | CreateDPT_StoreDriveControlByte:
|
|---|
| 87 | xor ax, ax ; Zero AX
|
|---|
| 88 | cmp BYTE [cs:bp+IDEVARS.bIRQ], 0 ; Interrupts enabled?
|
|---|
| 89 | jne SHORT .CheckHeadCount
|
|---|
| 90 | or al, FLG_IDE_CTRL_nIEN ; Disable interrupts
|
|---|
| 91 | ALIGN JUMP_ALIGN
|
|---|
| 92 | .CheckHeadCount:
|
|---|
| 93 | cmp BYTE [es:si+ATA1.wHeadCnt], 8 ; 1...8 heads?
|
|---|
| 94 | jbe SHORT .StoreDriveControlByte
|
|---|
| 95 | or al, FLG_IDE_CTRL_O8H ; Over 8 heads (pre-ATA)
|
|---|
| 96 | ALIGN JUMP_ALIGN
|
|---|
| 97 | .StoreDriveControlByte:
|
|---|
| 98 | mov [di+DPT.bDrvCtrl], al
|
|---|
| 99 | clc
|
|---|
| 100 | ret
|
|---|
| 101 |
|
|---|
| 102 |
|
|---|
| 103 | ;--------------------------------------------------------------------
|
|---|
| 104 | ; Stores P-CHS values from ATA information or user specified values to DPT.
|
|---|
| 105 | ;
|
|---|
| 106 | ; CreateDPT_StorePCHS
|
|---|
| 107 | ; Parameters:
|
|---|
| 108 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 109 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 110 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 111 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 112 | ; Returns:
|
|---|
| 113 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 114 | ; Set if any error
|
|---|
| 115 | ; Corrupts registers:
|
|---|
| 116 | ; AX, BX
|
|---|
| 117 | ;--------------------------------------------------------------------
|
|---|
| 118 | ALIGN JUMP_ALIGN
|
|---|
| 119 | CreateDPT_StorePCHS:
|
|---|
| 120 | call CreateDPT_GetUserOrAtaPCHS
|
|---|
| 121 | mov [di+DPT.wPCyls], ax
|
|---|
| 122 | mov [di+DPT.bPHeads], bh
|
|---|
| 123 | mov [di+DPT.bPSect], bl
|
|---|
| 124 | clc
|
|---|
| 125 | ret
|
|---|
| 126 |
|
|---|
| 127 | ;--------------------------------------------------------------------
|
|---|
| 128 | ; Returns user specified P-CHS or values read from ATA information.
|
|---|
| 129 | ;
|
|---|
| 130 | ; CreateDPT_GetUserOrAtaPCHS
|
|---|
| 131 | ; Parameters:
|
|---|
| 132 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 133 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 134 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 135 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 136 | ; Returns:
|
|---|
| 137 | ; AX: Number of P-CHS cylinders
|
|---|
| 138 | ; BL: Number of P-CHS sectors per track
|
|---|
| 139 | ; BH: Number of P-CHS heads
|
|---|
| 140 | ; Corrupts registers:
|
|---|
| 141 | ; Nothing
|
|---|
| 142 | ;--------------------------------------------------------------------
|
|---|
| 143 | ALIGN JUMP_ALIGN
|
|---|
| 144 | CreateDPT_GetUserOrAtaPCHS:
|
|---|
| 145 | mov ax, FLG_DRVPARAMS_USERCHS ; User specified CHS?
|
|---|
| 146 | call AccessDPT_TestIdeVarsFlagsForMasterOrSlaveDrive
|
|---|
| 147 | jnz SHORT CreateDPT_GetUserSpecifiedPCHS
|
|---|
| 148 | jmp AtaID_GetPCHS
|
|---|
| 149 |
|
|---|
| 150 | ;--------------------------------------------------------------------
|
|---|
| 151 | ; Returns user specified P-CHS values from ROMVARS.
|
|---|
| 152 | ;
|
|---|
| 153 | ; CreateDPT_GetUserSpecifiedPCHS
|
|---|
| 154 | ; Parameters:
|
|---|
| 155 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 156 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 157 | ; Returns:
|
|---|
| 158 | ; AX: Number of user specified P-CHS cylinders
|
|---|
| 159 | ; BL: Number of user specified P-CHS sectors per track
|
|---|
| 160 | ; BH: Number of user specified P-CHS heads
|
|---|
| 161 | ; Corrupts registers:
|
|---|
| 162 | ; Nothing
|
|---|
| 163 | ;--------------------------------------------------------------------
|
|---|
| 164 | ALIGN JUMP_ALIGN
|
|---|
| 165 | CreateDPT_GetUserSpecifiedPCHS:
|
|---|
| 166 | call AccessDPT_GetPointerToDRVPARAMStoCSBX
|
|---|
| 167 | mov ax, [cs:bx+DRVPARAMS.wCylinders]
|
|---|
| 168 | mov bx, [cs:bx+DRVPARAMS.wSectAndHeads]
|
|---|
| 169 | or BYTE [di+DPT.bFlags], FLG_DPT_USERCHS
|
|---|
| 170 | ret
|
|---|
| 171 |
|
|---|
| 172 |
|
|---|
| 173 | ;--------------------------------------------------------------------
|
|---|
| 174 | ; Stores L-CHS values by converting from P-CHS values if necessary.
|
|---|
| 175 | ;
|
|---|
| 176 | ; CreateDPT_StoreLCHS
|
|---|
| 177 | ; Parameters:
|
|---|
| 178 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 179 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 180 | ; Returns:
|
|---|
| 181 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 182 | ; Set if any error
|
|---|
| 183 | ; Corrupts registers:
|
|---|
| 184 | ; AX, CX, DX
|
|---|
| 185 | ;--------------------------------------------------------------------
|
|---|
| 186 | ALIGN JUMP_ALIGN
|
|---|
| 187 | CreateDPT_StoreLCHS:
|
|---|
| 188 | mov cx, [di+DPT.wPCyls] ; P-CHS Cylinders (1...16383)
|
|---|
| 189 | eMOVZX dx, BYTE [di+DPT.bPHeads] ; P-CHS Heads (1...16)
|
|---|
| 190 | call CreateDPT_ShiftPCHtoLCH
|
|---|
| 191 | test dh, dh ; 256 heads?
|
|---|
| 192 | jz SHORT .StoreToDPT ; If less, no correction needed
|
|---|
| 193 | dec dx ; Limit to 255 heads since DOS does not support 256 heads
|
|---|
| 194 | ALIGN JUMP_ALIGN
|
|---|
| 195 | .StoreToDPT:
|
|---|
| 196 | mov [di+DPT.bShLtoP], al
|
|---|
| 197 | mov [di+DPT.wLHeads], dx
|
|---|
| 198 | clc
|
|---|
| 199 | ret
|
|---|
| 200 |
|
|---|
| 201 | ;--------------------------------------------------------------------
|
|---|
| 202 | ; Returns L-CHS values from P-CHS values.
|
|---|
| 203 | ; Sectors per track is always the same for both addressing modes.
|
|---|
| 204 | ;
|
|---|
| 205 | ; CreateDPT_ShiftPCHtoLCH:
|
|---|
| 206 | ; Parameters:
|
|---|
| 207 | ; CX: Number of P-CHS cylinders (1...16383)
|
|---|
| 208 | ; DX: Number of P-CHS heads (1...16)
|
|---|
| 209 | ; Returns:
|
|---|
| 210 | ; AL: Number of bits shifted
|
|---|
| 211 | ; CX: Number of L-CHS cylinders (1...1024)
|
|---|
| 212 | ; DX: Number of L-CHS heads (1...256)
|
|---|
| 213 | ; Corrupts registers:
|
|---|
| 214 | ; Nothing
|
|---|
| 215 | ;--------------------------------------------------------------------
|
|---|
| 216 | ALIGN JUMP_ALIGN
|
|---|
| 217 | CreateDPT_ShiftPCHtoLCH:
|
|---|
| 218 | xor al, al ; Zero AL
|
|---|
| 219 | ALIGN JUMP_ALIGN
|
|---|
| 220 | .ShiftLoop:
|
|---|
| 221 | cmp cx, 1024 ; Need to shift?
|
|---|
| 222 | jbe SHORT .Return ; If not, return
|
|---|
| 223 | inc ax ; Increment shift count
|
|---|
| 224 | shr cx, 1 ; Halve cylinders
|
|---|
| 225 | shl dx, 1 ; Double heads
|
|---|
| 226 | jmp SHORT .ShiftLoop
|
|---|
| 227 | ALIGN JUMP_ALIGN
|
|---|
| 228 | .Return:
|
|---|
| 229 | ret
|
|---|
| 230 |
|
|---|
| 231 |
|
|---|
| 232 | ;--------------------------------------------------------------------
|
|---|
| 233 | ; Stores addressing information (L-CHS, P-CHS, LBA28 or LBA48).
|
|---|
| 234 | ;
|
|---|
| 235 | ; CreateDPT_StoreAddressing
|
|---|
| 236 | ; Parameters:
|
|---|
| 237 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 238 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 239 | ; Returns:
|
|---|
| 240 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 241 | ; Set if any error
|
|---|
| 242 | ; Corrupts registers:
|
|---|
| 243 | ; Nothing
|
|---|
| 244 | ;--------------------------------------------------------------------
|
|---|
| 245 | ALIGN JUMP_ALIGN
|
|---|
| 246 | CreateDPT_StoreAddressing:
|
|---|
| 247 | cmp WORD [di+DPT.wPCyls], 1024 ; L-CHS possible? (no translation needed)
|
|---|
| 248 | jbe SHORT .Return ; If so, nothing needs to be changed
|
|---|
| 249 | test BYTE [di+DPT.bFlags], FLG_DPT_USERCHS
|
|---|
| 250 | jnz SHORT .StorePCHS ; Use user defined P-CHS
|
|---|
| 251 | test WORD [es:si+ATA1.wCaps], A2_wCaps_LBA
|
|---|
| 252 | jz SHORT .StorePCHS ; Use P-CHS since LBA not supported
|
|---|
| 253 | test WORD [es:si+ATA6.wSetSup83], A6_wSetSup83_LBA48
|
|---|
| 254 | jz SHORT .StoreLBA28 ; Use LBA-28 since LBA-48 not supported
|
|---|
| 255 | or BYTE [di+DPT.bFlags], ADDR_DPT_LBA48<<1
|
|---|
| 256 | ALIGN JUMP_ALIGN
|
|---|
| 257 | .StoreLBA28:
|
|---|
| 258 | or BYTE [di+DPT.bFlags], ADDR_DPT_LBA28<<1
|
|---|
| 259 | or BYTE [di+DPT.bDrvSel], FLG_IDE_DRVHD_LBA
|
|---|
| 260 | ret
|
|---|
| 261 | ALIGN JUMP_ALIGN
|
|---|
| 262 | .StorePCHS:
|
|---|
| 263 | or BYTE [di+DPT.bFlags], ADDR_DPT_PCHS<<1
|
|---|
| 264 | ALIGN JUMP_ALIGN
|
|---|
| 265 | .Return:
|
|---|
| 266 | clc
|
|---|
| 267 | ret
|
|---|
| 268 |
|
|---|
| 269 |
|
|---|
| 270 | ;--------------------------------------------------------------------
|
|---|
| 271 | ; Stores Block Mode information.
|
|---|
| 272 | ;
|
|---|
| 273 | ; CreateDPT_StoreBlockMode
|
|---|
| 274 | ; Parameters:
|
|---|
| 275 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 276 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 277 | ; Returns:
|
|---|
| 278 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 279 | ; Set if any error
|
|---|
| 280 | ; Corrupts registers:
|
|---|
| 281 | ; Nothing
|
|---|
| 282 | ;--------------------------------------------------------------------
|
|---|
| 283 | ALIGN JUMP_ALIGN
|
|---|
| 284 | CreateDPT_StoreBlockMode:
|
|---|
| 285 | mov al, 1 ; Minimum block size is 1 sector
|
|---|
| 286 | mov ah, [es:si+ATA1.bBlckSize] ; Load max block size in sectors
|
|---|
| 287 | mov [di+DPT.wSetAndMaxBlock], ax
|
|---|
| 288 | ret
|
|---|
| 289 |
|
|---|
| 290 |
|
|---|
| 291 | ;--------------------------------------------------------------------
|
|---|
| 292 | ; Stores variables required by EBIOS functions.
|
|---|
| 293 | ;
|
|---|
| 294 | ; CreateDPT_StoreEBIOSSupport
|
|---|
| 295 | ; Parameters:
|
|---|
| 296 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 297 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 298 | ; Returns:
|
|---|
| 299 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 300 | ; Set if any error
|
|---|
| 301 | ; Corrupts registers:
|
|---|
| 302 | ; AX, BX, DX
|
|---|
| 303 | ;--------------------------------------------------------------------
|
|---|
| 304 | ALIGN JUMP_ALIGN
|
|---|
| 305 | CreateDPT_StoreEBIOSSupport:
|
|---|
| 306 | test BYTE [cs:ROMVARS.wFlags], FLG_ROMVARS_FULLMODE ; (clears CF)
|
|---|
| 307 | jz SHORT .DoNotSupportEBIOS ; No EBIOS support since small DPTs needed
|
|---|
| 308 | mov bl, [di+DPT.bFlags]
|
|---|
| 309 | and bx, BYTE MASK_DPT_ADDR ; Addressing mode (clears CF)
|
|---|
| 310 | jmp [cs:bx+.rgwAddrJmp] ; Jump to handle addressing mode
|
|---|
| 311 | ALIGN WORD_ALIGN
|
|---|
| 312 | .rgwAddrJmp:
|
|---|
| 313 | dw .DoNotSupportEBIOS ; ADDR_DPT_LCHS
|
|---|
| 314 | dw .DoNotSupportEBIOS ; ADDR_DPT_PCHS
|
|---|
| 315 | dw .SupportForLBA28 ; ADDR_DPT_LBA28
|
|---|
| 316 | dw .SupportForLBA48 ; ADDR_DPT_LBA48
|
|---|
| 317 | ALIGN JUMP_ALIGN
|
|---|
| 318 | .DoNotSupportEBIOS:
|
|---|
| 319 | ret
|
|---|
| 320 | ALIGN JUMP_ALIGN
|
|---|
| 321 | .SupportForLBA28:
|
|---|
| 322 | sub BYTE [di+DPT.bSize], 2 ; Only 4 bytes for sector count
|
|---|
| 323 | ALIGN JUMP_ALIGN
|
|---|
| 324 | .SupportForLBA48:
|
|---|
| 325 | add BYTE [di+DPT.bSize], EBDPT_size - DPT_size
|
|---|
| 326 | or BYTE [di+DPT.bFlags], FLG_DPT_EBIOS
|
|---|
| 327 | ; Fall to CreateDPT_StoreEbiosSectorCount
|
|---|
| 328 |
|
|---|
| 329 | ;--------------------------------------------------------------------
|
|---|
| 330 | ; Stores EBIOS total sector count for LBA addressing.
|
|---|
| 331 | ;
|
|---|
| 332 | ; CreateDPT_StoreEbiosSectorCount
|
|---|
| 333 | ; Parameters:
|
|---|
| 334 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 335 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 336 | ; Returns:
|
|---|
| 337 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 338 | ; Set if any error
|
|---|
| 339 | ; Corrupts registers:
|
|---|
| 340 | ; AX, BX, DX
|
|---|
| 341 | ;--------------------------------------------------------------------
|
|---|
| 342 | ;ALIGN JUMP_ALIGN
|
|---|
| 343 | CreateDPT_StoreEbiosSectorCount:
|
|---|
| 344 | call AtaID_GetTotalSectorCount
|
|---|
| 345 | mov [di+EBDPT.twCapacity], ax
|
|---|
| 346 | mov [di+EBDPT.twCapacity+2], dx
|
|---|
| 347 | mov [di+EBDPT.twCapacity+4], bx
|
|---|
| 348 | clc
|
|---|
| 349 | ret
|
|---|
| 350 |
|
|---|
| 351 |
|
|---|
| 352 | ;--------------------------------------------------------------------
|
|---|
| 353 | ; Stores number for drive and updates drive count.
|
|---|
| 354 | ;
|
|---|
| 355 | ; CreateDPT_StoreDriveNumberAndUpdateDriveCount
|
|---|
| 356 | ; Parameters:
|
|---|
| 357 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 358 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 359 | ; ES: BDA Segment
|
|---|
| 360 | ; Returns:
|
|---|
| 361 | ; DL: Drive number for new drive
|
|---|
| 362 | ; CF: Cleared if DPT parameters stored successfully
|
|---|
| 363 | ; Set if any error
|
|---|
| 364 | ; Corrupts registers:
|
|---|
| 365 | ; Nothing
|
|---|
| 366 | ;--------------------------------------------------------------------
|
|---|
| 367 | ALIGN JUMP_ALIGN
|
|---|
| 368 | CreateDPT_StoreDriveNumberAndUpdateDriveCount:
|
|---|
| 369 | ; Make sure that more drives can be accepted
|
|---|
| 370 | mov dl, [es:BDA.bHDCount] ; Load number of hard disks
|
|---|
| 371 | test dl, 80h ; Hard disks at maximum?
|
|---|
| 372 | stc ; Assume error
|
|---|
| 373 | jnz SHORT .TooManyDrives ; If so, return
|
|---|
| 374 |
|
|---|
| 375 | ; Store drive number to DPT
|
|---|
| 376 | or dl, 80h ; Set bit 7 since hard disk
|
|---|
| 377 | mov [di+DPT.bDrvNum], dl ; Store drive number
|
|---|
| 378 |
|
|---|
| 379 | ; Update BDA and RAMVARS
|
|---|
| 380 | inc BYTE [es:BDA.bHDCount] ; Increment drive count to BDA
|
|---|
| 381 | call RamVars_IncrementHardDiskCount
|
|---|
| 382 | clc
|
|---|
| 383 | .TooManyDrives:
|
|---|
| 384 | ret
|
|---|
