| [99] | 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| [3] | 2 | ; Description : Functions for creating Disk Parameter Table.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; Creates new Disk Parameter Table for detected hard disk.
|
|---|
| 9 | ; Drive is then fully accessible using any BIOS function.
|
|---|
| 10 | ;
|
|---|
| 11 | ; CreateDPT_FromAtaInformation
|
|---|
| 12 | ; Parameters:
|
|---|
| 13 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 14 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 15 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 16 | ; DS: RAMVARS segment
|
|---|
| 17 | ; ES: BDA Segment
|
|---|
| 18 | ; Returns:
|
|---|
| 19 | ; DL: Drive number for new drive
|
|---|
| [294] | 20 | ; DS:DI: Ptr to Disk Parameter Table (if successful)
|
|---|
| [3] | 21 | ; CF: Cleared if DPT created successfully
|
|---|
| 22 | ; Set if any error
|
|---|
| 23 | ; Corrupts registers:
|
|---|
| [99] | 24 | ; AX, BX, CX, DH
|
|---|
| [3] | 25 | ;--------------------------------------------------------------------
|
|---|
| 26 | CreateDPT_FromAtaInformation:
|
|---|
| [150] | 27 | call FindDPT_ForNewDriveToDSDI
|
|---|
| [99] | 28 | ; Fall to .InitializeDPT
|
|---|
| [3] | 29 |
|
|---|
| 30 | ;--------------------------------------------------------------------
|
|---|
| [99] | 31 | ; .InitializeDPT
|
|---|
| [3] | 32 | ; Parameters:
|
|---|
| 33 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 34 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 35 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 36 | ; Returns:
|
|---|
| [150] | 37 | ; Nothing
|
|---|
| [3] | 38 | ; Corrupts registers:
|
|---|
| [150] | 39 | ; AX
|
|---|
| [3] | 40 | ;--------------------------------------------------------------------
|
|---|
| [99] | 41 | .InitializeDPT:
|
|---|
| [150] | 42 | mov [di+DPT.bIdevarsOffset], bp ; IDEVARS must start in first 256 bytes of ROM
|
|---|
| 43 | ; Fall to .StoreDriveSelectAndDriveControlByte
|
|---|
| [3] | 44 |
|
|---|
| 45 | ;--------------------------------------------------------------------
|
|---|
| [150] | 46 | ; .StoreDriveSelectAndDriveControlByte
|
|---|
| [3] | 47 | ; Parameters:
|
|---|
| 48 | ; BH: Drive Select byte for Drive and Head Register
|
|---|
| 49 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 50 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 51 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 52 | ; Returns:
|
|---|
| [99] | 53 | ; Nothing
|
|---|
| [3] | 54 | ; Corrupts registers:
|
|---|
| 55 | ; AX
|
|---|
| 56 | ;--------------------------------------------------------------------
|
|---|
| [150] | 57 | .StoreDriveSelectAndDriveControlByte:
|
|---|
| 58 | mov al, bh
|
|---|
| 59 | and ax, BYTE FLG_DRVNHEAD_DRV ; AL now has Master/Slave bit
|
|---|
| 60 | cmp [cs:bp+IDEVARS.bIRQ], ah ; Interrupts enabled?
|
|---|
| 61 | jz SHORT .StoreFlags ; If not, do not set interrupt flag
|
|---|
| [158] | 62 | or al, FLGL_DPT_ENABLE_IRQ
|
|---|
| [150] | 63 | .StoreFlags:
|
|---|
| 64 | mov [di+DPT.wFlags], ax
|
|---|
| [173] | 65 | ; Fall to .StoreAddressing
|
|---|
| [3] | 66 |
|
|---|
| 67 | ;--------------------------------------------------------------------
|
|---|
| [173] | 68 | ; .StoreAddressing
|
|---|
| [3] | 69 | ; Parameters:
|
|---|
| 70 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 71 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 72 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 73 | ; Returns:
|
|---|
| [227] | 74 | ; Nothing
|
|---|
| [3] | 75 | ; Corrupts registers:
|
|---|
| [227] | 76 | ; AX, BX, CX, DX
|
|---|
| [3] | 77 | ;--------------------------------------------------------------------
|
|---|
| [173] | 78 | .StoreAddressing:
|
|---|
| 79 | ; Check if CHS defined in ROMVARS
|
|---|
| [193] | 80 | call AccessDPT_GetPointerToDRVPARAMStoCSBX
|
|---|
| 81 | test byte [cs:bx+DRVPARAMS.wFlags], FLG_DRVPARAMS_USERCHS ; User specified CHS?
|
|---|
| [227] | 82 | jnz SHORT .StoreUserDefinedPCHS
|
|---|
| [173] | 83 |
|
|---|
| 84 | ; Check if LBA supported
|
|---|
| [169] | 85 | call AtaID_GetPCHStoAXBLBHfromAtaInfoInESSI
|
|---|
| [173] | 86 | test BYTE [es:si+ATA1.wCaps+1], A1_wCaps_LBA>>8
|
|---|
| [227] | 87 | jz SHORT .StoreCHSfromAXBHBL ; Small old drive with CHS addressing only
|
|---|
| [3] | 88 |
|
|---|
| [173] | 89 | ; Check if 48-bit LBA supported
|
|---|
| 90 | test BYTE [es:si+ATA6.wSetSup83+1], A6_wSetSup83_LBA48>>8
|
|---|
| 91 | jz SHORT .StoreLBA28addressing
|
|---|
| 92 | or BYTE [di+DPT.bFlagsLow], ADDRESSING_MODE_LBA48<<ADDRESSING_MODE_FIELD_POSITION
|
|---|
| 93 | .StoreLBA28addressing:
|
|---|
| 94 | or BYTE [di+DPT.bFlagsLow], ADDRESSING_MODE_LBA28<<ADDRESSING_MODE_FIELD_POSITION
|
|---|
| 95 | call AtaID_GetTotalSectorCountToBXDXAXfromAtaInfoInESSI
|
|---|
| [227] | 96 | mov [di+DPT.twLbaSectors], ax
|
|---|
| 97 | mov [di+DPT.twLbaSectors+2], dx
|
|---|
| 98 | mov [di+DPT.twLbaSectors+4], bx
|
|---|
| [173] | 99 | call AtaID_GetLbaAssistedCHStoDXAXBLBH
|
|---|
| [227] | 100 | mov [di+DPT.bLbaHeads], bl
|
|---|
| 101 | jmp SHORT .StoreBlockMode
|
|---|
| [173] | 102 |
|
|---|
| [227] | 103 | ;--------------------------------------------------------------------
|
|---|
| 104 | ; .StoreUserDefinedPCHS
|
|---|
| 105 | ; Parameters:
|
|---|
| 106 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 107 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 108 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 109 | ; Returns:
|
|---|
| 110 | ; AX: Number of P-CHS cylinders
|
|---|
| 111 | ; BH: Number of P-CHS sectors per track
|
|---|
| 112 | ; BL: Number of P-CHS heads
|
|---|
| 113 | ; Corrupts registers:
|
|---|
| 114 | ; Nothing
|
|---|
| 115 | ;--------------------------------------------------------------------
|
|---|
| 116 | .StoreUserDefinedPCHS:
|
|---|
| [3] | 117 | call AccessDPT_GetPointerToDRVPARAMStoCSBX
|
|---|
| 118 | mov ax, [cs:bx+DRVPARAMS.wCylinders]
|
|---|
| [99] | 119 | mov bx, [cs:bx+DRVPARAMS.wHeadsAndSectors]
|
|---|
| [227] | 120 | ; Fall to .StoreCHSfromAXBHBL
|
|---|
| [3] | 121 |
|
|---|
| [227] | 122 | ;--------------------------------------------------------------------
|
|---|
| 123 | ; .StoreCHSfromAXBHBL
|
|---|
| 124 | ; Parameters:
|
|---|
| 125 | ; AX: Number of P-CHS cylinders
|
|---|
| 126 | ; BH: Number of P-CHS sectors per track
|
|---|
| 127 | ; BL: Number of P-CHS heads
|
|---|
| 128 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 129 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| 130 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| 131 | ; Returns:
|
|---|
| 132 | ; AX: Number of P-CHS cylinders
|
|---|
| 133 | ; BH: Number of P-CHS sectors per track
|
|---|
| 134 | ; BL: Number of P-CHS heads
|
|---|
| 135 | ; Corrupts registers:
|
|---|
| 136 | ; CX
|
|---|
| 137 | ;--------------------------------------------------------------------
|
|---|
| 138 | .StoreCHSfromAXBHBL:
|
|---|
| [173] | 139 | push ax
|
|---|
| [227] | 140 | push bx
|
|---|
| 141 | call AccessDPT_ShiftPCHinAXBLtoLCH ; Get number of bits to shift
|
|---|
| 142 | pop bx
|
|---|
| [173] | 143 | pop ax
|
|---|
| [227] | 144 | jcxz .StorePCHSfromAXDX ; Small drive so use L-CHS addressing
|
|---|
| [3] | 145 |
|
|---|
| [227] | 146 | ; Store P-CHS addressing mode and number of bits to shift in L-CHS to P-CHS translation
|
|---|
| 147 | or cl, ADDRESSING_MODE_PCHS<<ADDRESSING_MODE_FIELD_POSITION
|
|---|
| 148 | or [di+DPT.bFlagsLow], cl
|
|---|
| 149 | ; Fall to .StoreChsFromAXBLBH
|
|---|
| 150 |
|
|---|
| [3] | 151 | ;--------------------------------------------------------------------
|
|---|
| [227] | 152 | ; .StoreChsFromAXBLBH
|
|---|
| [3] | 153 | ; Parameters:
|
|---|
| [227] | 154 | ; AX: Number of P-CHS cylinders
|
|---|
| 155 | ; BH: Number of P-CHS sectors per track
|
|---|
| 156 | ; BL: Number of P-CHS heads
|
|---|
| [3] | 157 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 158 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| [160] | 159 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| [3] | 160 | ; Returns:
|
|---|
| [99] | 161 | ; Nothing
|
|---|
| [3] | 162 | ; Corrupts registers:
|
|---|
| [227] | 163 | ; Nothing
|
|---|
| [3] | 164 | ;--------------------------------------------------------------------
|
|---|
| [227] | 165 | .StorePCHSfromAXDX:
|
|---|
| 166 | mov [di+DPT.wPchsCylinders], ax
|
|---|
| 167 | mov [di+DPT.wPchsHeadsAndSectors], bx
|
|---|
| [99] | 168 | ; Fall to .StoreBlockMode
|
|---|
| [3] | 169 |
|
|---|
| 170 | ;--------------------------------------------------------------------
|
|---|
| [99] | 171 | ; .StoreBlockMode
|
|---|
| [3] | 172 | ; Parameters:
|
|---|
| 173 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 174 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| [160] | 175 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| [3] | 176 | ; Returns:
|
|---|
| [99] | 177 | ; Nothing
|
|---|
| [3] | 178 | ; Corrupts registers:
|
|---|
| [150] | 179 | ; Nothing
|
|---|
| [3] | 180 | ;--------------------------------------------------------------------
|
|---|
| [99] | 181 | .StoreBlockMode:
|
|---|
| [150] | 182 | cmp BYTE [es:si+ATA1.bBlckSize], 1 ; Max block size in sectors
|
|---|
| 183 | jbe SHORT .BlockModeTransfersNotSupported
|
|---|
| [158] | 184 | or BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
|
|---|
| [150] | 185 | .BlockModeTransfersNotSupported:
|
|---|
| 186 | ; Fall to .StoreDeviceSpecificParameters
|
|---|
| [3] | 187 |
|
|---|
| 188 | ;--------------------------------------------------------------------
|
|---|
| [150] | 189 | ; .StoreDeviceSpecificParameters
|
|---|
| [3] | 190 | ; Parameters:
|
|---|
| 191 | ; DS:DI: Ptr to Disk Parameter Table
|
|---|
| 192 | ; ES:SI: Ptr to 512-byte ATA information read from the drive
|
|---|
| [160] | 193 | ; CS:BP: Ptr to IDEVARS for the controller
|
|---|
| [3] | 194 | ; Returns:
|
|---|
| [99] | 195 | ; Nothing
|
|---|
| [3] | 196 | ; Corrupts registers:
|
|---|
| [150] | 197 | ; AX, BX, CX, DX
|
|---|
| [3] | 198 | ;--------------------------------------------------------------------
|
|---|
| [150] | 199 | .StoreDeviceSpecificParameters:
|
|---|
| 200 | call Device_FinalizeDPT
|
|---|
| [258] | 201 |
|
|---|
| [262] | 202 | ;----------------------------------------------------------------------
|
|---|
| 203 | ; Update drive counts (hard and floppy)
|
|---|
| [294] | 204 | ;----------------------------------------------------------------------
|
|---|
| 205 |
|
|---|
| [258] | 206 | %ifdef MODULE_SERIAL_FLOPPY
|
|---|
| 207 | ;
|
|---|
| 208 | ; These two instructions serve two purposes:
|
|---|
| 209 | ; 1. If the drive is a floppy drive (CF set), then we effectively increment the counter.
|
|---|
| [294] | 210 | ; 2. If this is a hard disk, and there have been any floppy drives previously added, then the hard disk is
|
|---|
| [258] | 211 | ; effectively discarded. This is more of a safety check then code that should ever normally be hit (see below).
|
|---|
| [294] | 212 | ; Since the floppy DPT's come after the hard disk DPT's, without expensive (code size) code to relocate a DPT,
|
|---|
| [258] | 213 | ; this was necessary. Now, this situation shouldn't happen in normal operation, for a couple of reasons:
|
|---|
| [294] | 214 | ; A. xtidecfg always puts configured serial ports at the end of the IDEVARS list
|
|---|
| [258] | 215 | ; B. the auto serial code is always executed last
|
|---|
| 216 | ; C. the serial server always returns floppy drives last
|
|---|
| 217 | ;
|
|---|
| 218 | adc byte [RAMVARS.xlateVars+XLATEVARS.bFlopCreateCnt], 0
|
|---|
| [294] | 219 | jnz .AllDone
|
|---|
| [258] | 220 | %else
|
|---|
| 221 | ;
|
|---|
| 222 | ; Even without floppy support enabled, we shouldn't try to mount a floppy image as a hard disk, which
|
|---|
| [294] | 223 | ; could lead to unpredictable results since no MBR will be present, etc. The server doesn't know that
|
|---|
| [258] | 224 | ; floppies are supported, so it is important to still fail here if a floppy is seen during the drive scan.
|
|---|
| 225 | ;
|
|---|
| 226 | jc .AllDone
|
|---|
| 227 | %endif
|
|---|
| 228 |
|
|---|
| [150] | 229 | inc BYTE [RAMVARS.bDrvCnt] ; Increment drive count to RAMVARS
|
|---|
| [294] | 230 |
|
|---|
| 231 | .AllDone:
|
|---|
| [162] | 232 | clc
|
|---|
| [3] | 233 | ret
|
|---|
| [258] | 234 |
|
|---|
