source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm@ 226

Last change on this file since 226 was 193, checked in by gregli@…, 13 years ago

Space optimizations in AccessDPT.asm, transfer one routine to a macro (retaining some encapsulation), and transfer the unique part of another routine to the one place it was being called (which also makes what it was doing more transparent).
File size: 7.1 KB
RevLine 
[99]1; Project name : XTIDE Universal BIOS
[3]2; Description : Functions for creating Disk Parameter Table.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Creates new Disk Parameter Table for detected hard disk.
9; Drive is then fully accessible using any BIOS function.
10;
11; CreateDPT_FromAtaInformation
12; Parameters:
13; BH: Drive Select byte for Drive and Head Register
14; ES:SI: Ptr to 512-byte ATA information read from the drive
15; CS:BP: Ptr to IDEVARS for the controller
16; DS: RAMVARS segment
17; ES: BDA Segment
18; Returns:
19; DL: Drive number for new drive
20; DS:DI: Ptr to Disk Parameter Table (if succesfull)
21; CF: Cleared if DPT created successfully
22; Set if any error
23; Corrupts registers:
[99]24; AX, BX, CX, DH
[3]25;--------------------------------------------------------------------
26CreateDPT_FromAtaInformation:
[150]27 call FindDPT_ForNewDriveToDSDI
[99]28 ; Fall to .InitializeDPT
[3]29
30;--------------------------------------------------------------------
[99]31; .InitializeDPT
[3]32; Parameters:
33; BH: Drive Select byte for Drive and Head Register
34; DS:DI: Ptr to Disk Parameter Table
35; CS:BP: Ptr to IDEVARS for the controller
36; Returns:
[150]37; Nothing
[3]38; Corrupts registers:
[150]39; AX
[3]40;--------------------------------------------------------------------
[99]41.InitializeDPT:
[150]42 mov [di+DPT.bIdevarsOffset], bp ; IDEVARS must start in first 256 bytes of ROM
43 ; Fall to .StoreDriveSelectAndDriveControlByte
[3]44
45;--------------------------------------------------------------------
[150]46; .StoreDriveSelectAndDriveControlByte
[3]47; Parameters:
48; BH: Drive Select byte for Drive and Head Register
49; DS:DI: Ptr to Disk Parameter Table
50; ES:SI: Ptr to 512-byte ATA information read from the drive
51; CS:BP: Ptr to IDEVARS for the controller
52; Returns:
[99]53; Nothing
[3]54; Corrupts registers:
55; AX
56;--------------------------------------------------------------------
[150]57.StoreDriveSelectAndDriveControlByte:
58 mov al, bh
59 and ax, BYTE FLG_DRVNHEAD_DRV ; AL now has Master/Slave bit
60 cmp [cs:bp+IDEVARS.bIRQ], ah ; Interrupts enabled?
61 jz SHORT .StoreFlags ; If not, do not set interrupt flag
[158]62 or al, FLGL_DPT_ENABLE_IRQ
[150]63.StoreFlags:
64 mov [di+DPT.wFlags], ax
[175]65
66%ifdef MODULE_SERIAL
67 cmp byte [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
[181]68 jnz .StoreAddressing
[175]69 or byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
[181]70%endif
[173]71 ; Fall to .StoreAddressing
[3]72
73;--------------------------------------------------------------------
[173]74; .StoreAddressing
[3]75; Parameters:
76; DS:DI: Ptr to Disk Parameter Table
77; ES:SI: Ptr to 512-byte ATA information read from the drive
78; CS:BP: Ptr to IDEVARS for the controller
79; Returns:
[173]80; DX:AX or AX: Number of cylinders
81; BH: Number of sectors per track
82; BL: Number of heads
[3]83; Corrupts registers:
[173]84; CX, (DX)
[3]85;--------------------------------------------------------------------
[173]86.StoreAddressing:
87 ; Check if CHS defined in ROMVARS
[193]88 call AccessDPT_GetPointerToDRVPARAMStoCSBX
89 test byte [cs:bx+DRVPARAMS.wFlags], FLG_DRVPARAMS_USERCHS ; User specified CHS?
[173]90 jnz SHORT .StoreUserDefinedCHSaddressing
91
92 ; Check if LBA supported
[169]93 call AtaID_GetPCHStoAXBLBHfromAtaInfoInESSI
[173]94 test BYTE [es:si+ATA1.wCaps+1], A1_wCaps_LBA>>8
95 jz SHORT .StoreCHSaddressing
[3]96
[173]97 ; Check if 48-bit LBA supported
98 test BYTE [es:si+ATA6.wSetSup83+1], A6_wSetSup83_LBA48>>8
99 jz SHORT .StoreLBA28addressing
100 or BYTE [di+DPT.bFlagsLow], ADDRESSING_MODE_LBA48<<ADDRESSING_MODE_FIELD_POSITION
101.StoreLBA28addressing:
102 or BYTE [di+DPT.bFlagsLow], ADDRESSING_MODE_LBA28<<ADDRESSING_MODE_FIELD_POSITION
103 call AtaID_GetTotalSectorCountToBXDXAXfromAtaInfoInESSI
104 call AtaID_GetLbaAssistedCHStoDXAXBLBH
105 jmp SHORT .StoreChsFromDXAXBX
106
107 ; Check if P-CHS to L-CHS translation required
108.StoreUserDefinedCHSaddressing:
[3]109 call AccessDPT_GetPointerToDRVPARAMStoCSBX
110 mov ax, [cs:bx+DRVPARAMS.wCylinders]
[99]111 mov bx, [cs:bx+DRVPARAMS.wHeadsAndSectors]
[173]112.StoreCHSaddressing:
113 cmp ax, MAX_LCHS_CYLINDERS
114 jbe SHORT .StoreChsFromAXBX ; No translation required
[3]115
[173]116 ; We need to get number of bits to shift for translation
117 push ax
118 eMOVZX dx, bl ; Heads now in DX
[181]119 xchg bx, ax ; Cylinders now in BX
120 call AccessDPT_ShiftPCHinBXDXtoLCH ; Leaves AX untouched
121 xchg bx, ax ; Restore HeadsAndSectors to BX
[173]122 or cl, ADDRESSING_MODE_PCHS<<ADDRESSING_MODE_FIELD_POSITION
123 or [di+DPT.bFlagsLow], cl ; Store bits to shift
124 pop ax
125 ; Fall to .StoreChsFromAXBX
[3]126
127;--------------------------------------------------------------------
[173]128; .StoreChsFromAXBX
129; .StoreChsFromDXAXBX
[3]130; Parameters:
[173]131; DX:AX or AX: Number of cylinders
132; BH: Number of sectors per track
133; BL: Number of heads
[3]134; DS:DI: Ptr to Disk Parameter Table
135; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]136; CS:BP: Ptr to IDEVARS for the controller
[3]137; Returns:
[99]138; Nothing
[3]139; Corrupts registers:
[173]140; DX
[3]141;--------------------------------------------------------------------
[173]142.StoreChsFromAXBX:
143 xor dx, dx
144.StoreChsFromDXAXBX:
145 mov [di+DPT.dwCylinders], ax
146 mov [di+DPT.dwCylinders+2], dx
147 mov [di+DPT.wHeadsAndSectors], bx
[99]148 ; Fall to .StoreBlockMode
[3]149
150;--------------------------------------------------------------------
[99]151; .StoreBlockMode
[3]152; Parameters:
153; DS:DI: Ptr to Disk Parameter Table
154; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]155; CS:BP: Ptr to IDEVARS for the controller
[3]156; Returns:
[99]157; Nothing
[3]158; Corrupts registers:
[150]159; Nothing
[3]160;--------------------------------------------------------------------
[99]161.StoreBlockMode:
[150]162 cmp BYTE [es:si+ATA1.bBlckSize], 1 ; Max block size in sectors
163 jbe SHORT .BlockModeTransfersNotSupported
[158]164 or BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
[150]165.BlockModeTransfersNotSupported:
166 ; Fall to .StoreDeviceSpecificParameters
[3]167
168;--------------------------------------------------------------------
[150]169; .StoreDeviceSpecificParameters
[3]170; Parameters:
171; DS:DI: Ptr to Disk Parameter Table
172; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]173; CS:BP: Ptr to IDEVARS for the controller
[3]174; Returns:
[99]175; Nothing
[3]176; Corrupts registers:
[150]177; AX, BX, CX, DX
[3]178;--------------------------------------------------------------------
[150]179.StoreDeviceSpecificParameters:
180 call Device_FinalizeDPT
[99]181 ; Fall to .StoreDriveNumberAndUpdateDriveCount
[3]182
183;--------------------------------------------------------------------
[99]184; .StoreDriveNumberAndUpdateDriveCount
[3]185; Parameters:
186; DS:DI: Ptr to Disk Parameter Table
187; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]188; CS:BP: Ptr to IDEVARS for the controller
[3]189; ES: BDA Segment
190; Returns:
191; DL: Drive number for new drive
[162]192; CF: Always cleared
[3]193; Corrupts registers:
194; Nothing
195;--------------------------------------------------------------------
[99]196.StoreDriveNumberAndUpdateDriveCount:
[150]197 mov dl, [es:BDA.bHDCount]
198 or dl, 80h ; Set bit 7 since hard disk
[3]199
[150]200 inc BYTE [RAMVARS.bDrvCnt] ; Increment drive count to RAMVARS
201 inc BYTE [es:BDA.bHDCount] ; Increment drive count to BDA
[3]202
[150]203 cmp BYTE [RAMVARS.bFirstDrv], 0 ; First drive set?
204 ja SHORT .AllDone ; If so, return
205 mov [RAMVARS.bFirstDrv], dl ; Store first drive number
[162]206 clc
[150]207.AllDone:
[3]208 ret
Note: See TracBrowser for help on using the repository browser.