source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/CreateDPT.asm@ 177

Last change on this file since 177 was 175, checked in by gregli@…, 13 years ago

ifdef of existing serial code, in preperation for checkin
File size: 7.0 KB
RevLine 
[99]1; Project name : XTIDE Universal BIOS
[3]2; Description : Functions for creating Disk Parameter Table.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Creates new Disk Parameter Table for detected hard disk.
9; Drive is then fully accessible using any BIOS function.
10;
11; CreateDPT_FromAtaInformation
12; Parameters:
13; BH: Drive Select byte for Drive and Head Register
14; ES:SI: Ptr to 512-byte ATA information read from the drive
15; CS:BP: Ptr to IDEVARS for the controller
16; DS: RAMVARS segment
17; ES: BDA Segment
18; Returns:
19; DL: Drive number for new drive
20; DS:DI: Ptr to Disk Parameter Table (if succesfull)
21; CF: Cleared if DPT created successfully
22; Set if any error
23; Corrupts registers:
[99]24; AX, BX, CX, DH
[3]25;--------------------------------------------------------------------
26CreateDPT_FromAtaInformation:
[150]27 call FindDPT_ForNewDriveToDSDI
[99]28 ; Fall to .InitializeDPT
[3]29
30;--------------------------------------------------------------------
[99]31; .InitializeDPT
[3]32; Parameters:
33; BH: Drive Select byte for Drive and Head Register
34; DS:DI: Ptr to Disk Parameter Table
35; CS:BP: Ptr to IDEVARS for the controller
36; Returns:
[150]37; Nothing
[3]38; Corrupts registers:
[150]39; AX
[3]40;--------------------------------------------------------------------
[99]41.InitializeDPT:
[150]42 mov [di+DPT.bIdevarsOffset], bp ; IDEVARS must start in first 256 bytes of ROM
43 ; Fall to .StoreDriveSelectAndDriveControlByte
[3]44
45;--------------------------------------------------------------------
[150]46; .StoreDriveSelectAndDriveControlByte
[3]47; Parameters:
48; BH: Drive Select byte for Drive and Head Register
49; DS:DI: Ptr to Disk Parameter Table
50; ES:SI: Ptr to 512-byte ATA information read from the drive
51; CS:BP: Ptr to IDEVARS for the controller
52; Returns:
[99]53; Nothing
[3]54; Corrupts registers:
55; AX
56;--------------------------------------------------------------------
[150]57.StoreDriveSelectAndDriveControlByte:
58 mov al, bh
59 and ax, BYTE FLG_DRVNHEAD_DRV ; AL now has Master/Slave bit
60 cmp [cs:bp+IDEVARS.bIRQ], ah ; Interrupts enabled?
61 jz SHORT .StoreFlags ; If not, do not set interrupt flag
[158]62 or al, FLGL_DPT_ENABLE_IRQ
[150]63.StoreFlags:
64 mov [di+DPT.wFlags], ax
[175]65
66%ifdef MODULE_SERIAL
67 cmp byte [cs:bp+IDEVARS.bDevice], DEVICE_SERIAL_PORT
68 jnz .around
69 or byte [di+DPT.bFlagsHigh], FLGH_DPT_SERIAL_DEVICE
70.around:
71%endif
72
[173]73 ; Fall to .StoreAddressing
[3]74
75;--------------------------------------------------------------------
[173]76; .StoreAddressing
[3]77; Parameters:
78; DS:DI: Ptr to Disk Parameter Table
79; ES:SI: Ptr to 512-byte ATA information read from the drive
80; CS:BP: Ptr to IDEVARS for the controller
81; Returns:
[173]82; DX:AX or AX: Number of cylinders
83; BH: Number of sectors per track
84; BL: Number of heads
[3]85; Corrupts registers:
[173]86; CX, (DX)
[3]87;--------------------------------------------------------------------
[173]88.StoreAddressing:
89 ; Check if CHS defined in ROMVARS
[99]90 mov al, FLG_DRVPARAMS_USERCHS ; User specified CHS?
[3]91 call AccessDPT_TestIdeVarsFlagsForMasterOrSlaveDrive
[173]92 jnz SHORT .StoreUserDefinedCHSaddressing
93
94 ; Check if LBA supported
[169]95 call AtaID_GetPCHStoAXBLBHfromAtaInfoInESSI
[173]96 test BYTE [es:si+ATA1.wCaps+1], A1_wCaps_LBA>>8
97 jz SHORT .StoreCHSaddressing
[3]98
[173]99 ; Check if 48-bit LBA supported
100 test BYTE [es:si+ATA6.wSetSup83+1], A6_wSetSup83_LBA48>>8
101 jz SHORT .StoreLBA28addressing
102 or BYTE [di+DPT.bFlagsLow], ADDRESSING_MODE_LBA48<<ADDRESSING_MODE_FIELD_POSITION
103.StoreLBA28addressing:
104 or BYTE [di+DPT.bFlagsLow], ADDRESSING_MODE_LBA28<<ADDRESSING_MODE_FIELD_POSITION
105 call AtaID_GetTotalSectorCountToBXDXAXfromAtaInfoInESSI
106 call AtaID_GetLbaAssistedCHStoDXAXBLBH
107 jmp SHORT .StoreChsFromDXAXBX
108
109 ; Check if P-CHS to L-CHS translation required
110.StoreUserDefinedCHSaddressing:
[3]111 call AccessDPT_GetPointerToDRVPARAMStoCSBX
112 mov ax, [cs:bx+DRVPARAMS.wCylinders]
[99]113 mov bx, [cs:bx+DRVPARAMS.wHeadsAndSectors]
[173]114.StoreCHSaddressing:
115 cmp ax, MAX_LCHS_CYLINDERS
116 jbe SHORT .StoreChsFromAXBX ; No translation required
[3]117
[173]118 ; We need to get number of bits to shift for translation
119 push bx
120 push ax
121 eMOVZX dx, bl ; Heads now in DX
122 xchg bx, ax ; Sectors now in BX
123 call AccessDPT_ShiftPCHinBXDXtoLCH
124 or cl, ADDRESSING_MODE_PCHS<<ADDRESSING_MODE_FIELD_POSITION
125 or [di+DPT.bFlagsLow], cl ; Store bits to shift
126 pop ax
127 pop bx
128 ; Fall to .StoreChsFromAXBX
[3]129
130;--------------------------------------------------------------------
[173]131; .StoreChsFromAXBX
132; .StoreChsFromDXAXBX
[3]133; Parameters:
[173]134; DX:AX or AX: Number of cylinders
135; BH: Number of sectors per track
136; BL: Number of heads
[3]137; DS:DI: Ptr to Disk Parameter Table
138; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]139; CS:BP: Ptr to IDEVARS for the controller
[3]140; Returns:
[99]141; Nothing
[3]142; Corrupts registers:
[173]143; DX
[3]144;--------------------------------------------------------------------
[173]145.StoreChsFromAXBX:
146 xor dx, dx
147.StoreChsFromDXAXBX:
148 mov [di+DPT.dwCylinders], ax
149 mov [di+DPT.dwCylinders+2], dx
150 mov [di+DPT.wHeadsAndSectors], bx
[99]151 ; Fall to .StoreBlockMode
[3]152
153;--------------------------------------------------------------------
[99]154; .StoreBlockMode
[3]155; Parameters:
156; DS:DI: Ptr to Disk Parameter Table
157; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]158; CS:BP: Ptr to IDEVARS for the controller
[3]159; Returns:
[99]160; Nothing
[3]161; Corrupts registers:
[150]162; Nothing
[3]163;--------------------------------------------------------------------
[99]164.StoreBlockMode:
[150]165 cmp BYTE [es:si+ATA1.bBlckSize], 1 ; Max block size in sectors
166 jbe SHORT .BlockModeTransfersNotSupported
[158]167 or BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
[150]168.BlockModeTransfersNotSupported:
169 ; Fall to .StoreDeviceSpecificParameters
[3]170
171;--------------------------------------------------------------------
[150]172; .StoreDeviceSpecificParameters
[3]173; Parameters:
174; DS:DI: Ptr to Disk Parameter Table
175; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]176; CS:BP: Ptr to IDEVARS for the controller
[3]177; Returns:
[99]178; Nothing
[3]179; Corrupts registers:
[150]180; AX, BX, CX, DX
[3]181;--------------------------------------------------------------------
[150]182.StoreDeviceSpecificParameters:
183 call Device_FinalizeDPT
[99]184 ; Fall to .StoreDriveNumberAndUpdateDriveCount
[3]185
186;--------------------------------------------------------------------
[99]187; .StoreDriveNumberAndUpdateDriveCount
[3]188; Parameters:
189; DS:DI: Ptr to Disk Parameter Table
190; ES:SI: Ptr to 512-byte ATA information read from the drive
[160]191; CS:BP: Ptr to IDEVARS for the controller
[3]192; ES: BDA Segment
193; Returns:
194; DL: Drive number for new drive
[162]195; CF: Always cleared
[3]196; Corrupts registers:
197; Nothing
198;--------------------------------------------------------------------
[99]199.StoreDriveNumberAndUpdateDriveCount:
[150]200 mov dl, [es:BDA.bHDCount]
201 or dl, 80h ; Set bit 7 since hard disk
[3]202
[150]203 inc BYTE [RAMVARS.bDrvCnt] ; Increment drive count to RAMVARS
204 inc BYTE [es:BDA.bHDCount] ; Increment drive count to BDA
[3]205
[150]206 cmp BYTE [RAMVARS.bFirstDrv], 0 ; First drive set?
207 ja SHORT .AllDone ; If so, return
208 mov [RAMVARS.bFirstDrv], dl ; Store first drive number
[162]209 clc
[150]210.AllDone:
[3]211 ret
Note: See TracBrowser for help on using the repository browser.