source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/AccessDPT.asm@ 502

Last change on this file since 502 was 493, checked in by gregli@…, 12 years ago

Separated MODULE_8BIT_IDE into the basic part used by XTIDE rev 1 and rev 2 which is PIO based, and MODULE_8BIT_IDE_ADVANCED for JRIDE and XTCF support which requires memory mapping and/or DMA. This allows for creating an 8KB image with boot menu support (but no hotkeys) for the XTIDE rev 1. Cleaned up how we reset the drive translation information, ensuring it is properly set between boot attempt on a primary and secondary drive - as a result we clean it when needed, rather than trying to always keep it clean. Also fixed translation bugs in int13h.asm where I had previously missed converting some MODULE_HOTKEYS into MODULE_DRIVEXLATE.

File size: 6.2 KB
RevLine 
[99]1; Project name : XTIDE Universal BIOS
[3]2; Description : Functions for accessing DPT data.
3
[376]4;
[491]5; XTIDE Universal BIOS and Associated Tools
[376]6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
[491]12;
[376]13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
[491]16; GNU General Public License for more details.
[376]17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
[491]18;
[376]19
[3]20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
[421]24; AccessDPT_GetDriveSelectByteForOldInt13hToAL
25; AccessDPT_GetDriveSelectByteForEbiosToAL
[150]26; Parameters:
27; DS:DI: Ptr to Disk Parameter Table
28; Returns:
29; AL: Drive Select Byte
30; Corrupts registers:
31; Nothing
32;--------------------------------------------------------------------
33ALIGN JUMP_ALIGN
[421]34AccessDPT_GetDriveSelectByteForOldInt13hToAL:
35 mov al, [di+DPT.bFlagsLow]
36 test al, FLGL_DPT_ASSISTED_LBA
37 jnz SHORT GetDriveSelectByteForAssistedLBAtoAL
38
39 and al, FLG_DRVNHEAD_DRV ; Clear all but drive select bit
[150]40 or al, MASK_DRVNHEAD_SET ; Bits set to 1 for old drives
41 ret
42
[421]43%ifdef MODULE_EBIOS
44ALIGN JUMP_ALIGN
45AccessDPT_GetDriveSelectByteForEbiosToAL:
[443]46 mov al, [di+DPT.bFlagsLow]
[421]47 ; Fall to GetDriveSelectByteForAssistedLBAtoAL
48%endif ; MODULE_EBIOS
[150]49
[421]50ALIGN JUMP_ALIGN
51GetDriveSelectByteForAssistedLBAtoAL:
52 and al, FLG_DRVNHEAD_DRV ; Master / Slave select
53 or al, FLG_DRVNHEAD_LBA | MASK_DRVNHEAD_SET
54 ret
55
56
[150]57;--------------------------------------------------------------------
58; AccessDPT_GetDeviceControlByteToAL
59; Parameters:
60; DS:DI: Ptr to Disk Parameter Table
61; Returns:
62; AL: Device Control Byte
63; Corrupts registers:
64; Nothing
65;--------------------------------------------------------------------
66ALIGN JUMP_ALIGN
67AccessDPT_GetDeviceControlByteToAL:
[411]68%ifdef MODULE_IRQ
[491]69
70%ifndef USE_UNDOC_INTEL
[150]71 xor al, al
[491]72%endif
73
74 test BYTE [di+DPT.bFlagsLow], FLGL_DPT_ENABLE_IRQ ; Clears CF
75
76%ifdef USE_UNDOC_INTEL
77 eSALC ; Clears AL using CF while preserving flags
78%endif
79
[150]80 jnz SHORT .EnableDeviceIrq
81 or al, FLG_DEVCONTROL_nIEN ; Disable IRQ
82.EnableDeviceIrq:
[411]83%else
84 mov al, FLG_DEVCONTROL_nIEN ; Disable IRQ
[491]85%endif ; MODULE_IRQ
[150]86 ret
87
[227]88
[150]89;--------------------------------------------------------------------
[227]90; AccessDPT_GetLCHStoAXBLBH
[3]91; Parameters:
92; DS:DI: Ptr to Disk Parameter Table
93; Returns:
[227]94; AX: Number of L-CHS cylinders
95; BL: Number of L-CHS heads
96; BH: Number of L-CHS sectors per track
[3]97; Corrupts registers:
[421]98; Nothing
[3]99;--------------------------------------------------------------------
[227]100AccessDPT_GetLCHStoAXBLBH:
[421]101 mov ax, [di+DPT.wLchsCylinders]
102 mov bx, [di+DPT.wLchsHeadsAndSectors]
[227]103 ret
[173]104
[227]105
[493]106%ifdef MODULE_8BIT_IDE_ADVANCED
[473]107;--------------------------------------------------------------------
108; AccessDPT_IsThisDeviceXTCF
109; Parameters:
110; DS:DI: Ptr to Disk Parameter Table
111; Returns:
112; AH: Device Type
113; ZF: Set if XTCF
114; Cleared if some other device
115; Corrupts registers:
116; Nothing
117;--------------------------------------------------------------------
118AccessDPT_IsThisDeviceXTCF:
119 mov ah, [di+DPT_ATA.bDevice]
120 cmp ah, DEVICE_8BIT_XTCF_PIO8
121 je SHORT .DeviceIsXTCF
122 cmp ah, DEVICE_8BIT_XTCF_DMA
123 je SHORT .DeviceIsXTCF
124 cmp ah, DEVICE_8BIT_XTCF_MEMMAP
125.DeviceIsXTCF:
126 ret
[493]127%endif ; MODULE_8BIT_IDE_ADVANCED
[473]128
129
[421]130%ifdef MODULE_EBIOS
[227]131;--------------------------------------------------------------------
[230]132; AccessDPT_GetLbaSectorCountToBXDXAX
133; Parameters:
134; DS:DI: Ptr to Disk Parameter Table
135; Returns:
136; BX:DX:AX: 48-bit sector count
137; Corrupts registers:
138; Nothing
139;--------------------------------------------------------------------
140AccessDPT_GetLbaSectorCountToBXDXAX:
141 mov ax, [di+DPT.twLbaSectors]
142 mov dx, [di+DPT.twLbaSectors+2]
143 mov bx, [di+DPT.twLbaSectors+4]
144 ret
[421]145%endif ; MODULE_EBIOS
[230]146
147
148;--------------------------------------------------------------------
[3]149; Returns pointer to DRVPARAMS for master or slave drive.
150;
151; AccessDPT_GetPointerToDRVPARAMStoCSBX
152; Parameters:
153; DS:DI: Ptr to Disk Parameter Table
154; Returns:
155; CS:BX: Ptr to DRVPARAMS
156; Corrupts registers:
157; Nothing
158;--------------------------------------------------------------------
159AccessDPT_GetPointerToDRVPARAMStoCSBX:
[473]160 call AccessDPT_GetIdevarsToCSBX
[150]161 add bx, BYTE IDEVARS.drvParamsMaster ; CS:BX points to Master Drive DRVPARAMS
[158]162 test BYTE [di+DPT.bFlagsLow], FLGL_DPT_SLAVE
[150]163 jz SHORT .ReturnPointerToDRVPARAMS
164 add bx, BYTE DRVPARAMS_size ; CS:BX points to Slave Drive DRVPARAMS
165.ReturnPointerToDRVPARAMS:
[3]166 ret
[200]167
[421]168
[200]169;--------------------------------------------------------------------
[473]170; Needed many times during initialization so it is better to
171; make it as a function to save bytes.
172;
173; AccessDPT_GetIdevarsToCSBX
174; Parameters:
175; DS:DI: Ptr to Disk Parameter Table
176; Returns:
177; CS:BX: Ptr to IDEVARS for the drive
178; Corrupts registers:
179; Nothing
180;--------------------------------------------------------------------
181AccessDPT_GetIdevarsToCSBX:
182 eMOVZX bx, BYTE [di+DPT.bIdevarsOffset]
183 ret
184
185
186;--------------------------------------------------------------------
[422]187; ACCESSDPT__GET_UNSHIFTED_TRANSLATE_MODE_TO_AXZF
[200]188; Parameters:
189; DS:DI: Ptr to Disk Parameter Table
190; Returns:
[422]191; AX: Translate Mode (TRANSLATEMODE_NORMAL, TRANSLATEMODE_LARGE or TRANSLATEMODE_ASSISTED_LBA)
[200]192; unshifted (still shifted where it is in bFlagsLow)
193; ZF: Set based on value in AL
194; Corrupts registers:
[421]195; Nothing
[200]196;--------------------------------------------------------------------
[230]197;
198; Converted to a macro since only called in two places, and the call/ret overhead
[200]199; is not worth it for these two instructions (4 bytes total)
200;
[422]201%macro ACCESSDPT__GET_UNSHIFTED_TRANSLATE_MODE_TO_AXZF 0
[200]202 mov al, [di+DPT.bFlagsLow]
[422]203 and ax, BYTE MASKL_DPT_TRANSLATEMODE
[200]204%endmacro
Note: See TracBrowser for help on using the repository browser.