source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/VariablesAndDPTs/AccessDPT.asm@ 371

; Project name  :   XTIDE Universal BIOS
; Description   :   Functions for accessing DPT data.

; Section containing code
SECTION .text

%ifdef MODULE_ADVANCED_ATA
;--------------------------------------------------------------------
; AccessDPT_GetIdeBasePortToBX
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       BX:     IDE Base Port Address
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
AccessDPT_GetIdeBasePortToBX:
    eMOVZX  bx, [di+DPT.bIdevarsOffset]         ; CS:BX points to IDEVARS
    mov     bx, [cs:bx+IDEVARS.wPort]
    ret

%endif


;--------------------------------------------------------------------
; AccessDPT_GetDriveSelectByteToAL
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       AL:     Drive Select Byte
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
AccessDPT_GetDriveSelectByteToAL:
    mov     al, [di+DPT.wFlags]
    and     al, FLG_DRVNHEAD_LBA | FLG_DRVNHEAD_DRV
    or      al, MASK_DRVNHEAD_SET   ; Bits set to 1 for old drives
    ret


;--------------------------------------------------------------------
; AccessDPT_GetDeviceControlByteToAL
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       AL:     Device Control Byte
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
AccessDPT_GetDeviceControlByteToAL:
    xor     al, al
    test    BYTE [di+DPT.bFlagsLow], FLGL_DPT_ENABLE_IRQ
    jnz     SHORT .EnableDeviceIrq
    or      al, FLG_DEVCONTROL_nIEN ; Disable IRQ
.EnableDeviceIrq:
    ret


;--------------------------------------------------------------------
; AccessDPT_GetLCHStoAXBLBH
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       AX:     Number of L-CHS cylinders
;       BL:     Number of L-CHS heads
;       BH:     Number of L-CHS sectors per track
;   Corrupts registers:
;       CX, DX
;--------------------------------------------------------------------
AccessDPT_GetLCHStoAXBLBH:
    ; Return LBA-assisted CHS if LBA addressing used
    test    BYTE [di+DPT.bFlagsLow], FLG_DRVNHEAD_LBA
    jz      SHORT .ConvertPchsToLchs

    call    AccessDPT_GetLbaSectorCountToBXDXAX
    call    LbaAssist_ConvertSectorCountFromBXDXAXtoLbaAssistedCHSinDXAXBLBH
    LIMIT_LBA_CYLINDERS_IN_DXAX_TO_LCHS_CYLINDERS
    ret

.ConvertPchsToLchs:
    mov     ax, [di+DPT.wPchsCylinders]
    mov     bx, [di+DPT.wPchsHeadsAndSectors]
    ; Fall to AccessDPT_ShiftPCHinAXBLtoLCH


;--------------------------------------------------------------------
; AccessDPT_ShiftPCHinAXBLtoLCH
;   Parameters:
;       AX:     P-CHS cylinders (1...16383)
;       BL:     P-CHS heads (1...16)
;   Returns:
;       AX:     Number of L-CHS cylinders (1...1024)
;       BL:     Number of L-CHS heads (1...255)
;       CX:     Number of bits shifted (4 at most)
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
AccessDPT_ShiftPCHinAXBLtoLCH:
    xor     cx, cx
.ShiftLoop:
    cmp     ax, MAX_LCHS_CYLINDERS      ; Need to shift?
    jbe     SHORT .Return               ;  If not, return
    inc     cx                          ; Increment shift count
    shr     ax, 1                       ; Halve cylinders
    shl     bl, 1                       ; Double heads
    jnz     SHORT .ShiftLoop            ; Falls through only on the last (4th) iteration and only if BL was 16 on entry
    dec     bl                          ; DOS doesn't support drives with 256 heads so we limit heads to 255
    ; We can save a byte here by using DEC BX if we don't care about BH
.Return:
    ret


;--------------------------------------------------------------------
; AccessDPT_GetLbaSectorCountToBXDXAX
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       BX:DX:AX:   48-bit sector count
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
AccessDPT_GetLbaSectorCountToBXDXAX:
    mov     ax, [di+DPT.twLbaSectors]
    mov     dx, [di+DPT.twLbaSectors+2]
    mov     bx, [di+DPT.twLbaSectors+4]
    ret


;--------------------------------------------------------------------
; Returns pointer to DRVPARAMS for master or slave drive.
;
; AccessDPT_GetPointerToDRVPARAMStoCSBX
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       CS:BX:  Ptr to DRVPARAMS
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
AccessDPT_GetPointerToDRVPARAMStoCSBX:
    eMOVZX  bx, [di+DPT.bIdevarsOffset]         ; CS:BX points to IDEVARS
    add     bx, BYTE IDEVARS.drvParamsMaster    ; CS:BX points to Master Drive DRVPARAMS
    test    BYTE [di+DPT.bFlagsLow], FLGL_DPT_SLAVE
    jz      SHORT .ReturnPointerToDRVPARAMS
    add     bx, BYTE DRVPARAMS_size             ; CS:BX points to Slave Drive DRVPARAMS
.ReturnPointerToDRVPARAMS:
    ret

;--------------------------------------------------------------------
; AccessDPT_GetUnshiftedAddressModeToALZF
;   Parameters:
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       AL:     Addressing Mode (L-CHS, P-CHS, LBA28, LBA48)
;               unshifted (still shifted where it is in bFlagsLow)
;       ZF:     Set based on value in AL
;   Corrupts registers:
;       AL
;--------------------------------------------------------------------
;
; Converted to a macro since only called in two places, and the call/ret overhead
; is not worth it for these two instructions (4 bytes total)
;
%macro AccessDPT_GetUnshiftedAddressModeToALZF 0
    mov     al, [di+DPT.bFlagsLow]
    and     al, MASKL_DPT_ADDRESSING_MODE
%endmacro