source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm @ 505

Last change on this file since 505 was 505, checked in by krille_n_@…, 11 years ago

Changes:

  • Reverted the changes to MenuEvents.inc done in r492 since they broke the F1 key function in XTIDECFG.
  • Added a tail-call optimized variant of the CALL_DISPLAY_LIBRARY macro (JMP_DISPLAY_LIBRARY).
  • Put a block size limit in AH1Eh_ChangeXTCFmodeBasedOnControlRegisterInAL. I think it's needed but if not, it's easy to remove.
  • Other optimizations and fixes.
File size: 11.7 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Strings and equates for BIOS messages.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
21    %include "Display.inc"
22%endif
23
24; Section containing code
25SECTION .text
26
27; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
28; To support an optimization in that code, these strings must start on the same 256 byte page,
29; which is checked at assembly time below.
30;
31g_szDetectStart:
32g_szDetectMaster:       db  "Master",NULL
33g_szDetectSlave:        db  "Slave ",NULL
34g_szDetectOuter:        db  "%s at %s: ",NULL
35%ifdef MODULE_SERIAL
36g_szDetectCOM:          db  "COM%c%s",NULL
37g_szDetectCOMAuto:      db  " Detect",NULL
38g_szDetectCOMSmall:     db  "/%u%u00",NULL                  ; IDE Master at COM1/9600:
39g_szDetectCOMLarge:     db  "/%u.%uK",NULL                  ; IDE Master at COM1/19.2K:
40%endif
41g_szDetectEnd:
42g_szDetectPort:         db  "%x",NULL                       ; IDE Master at 1F0h:
43
44%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
45    %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
46        %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP.  Please move this block up or down within Strings.asm"
47    %endif
48%endif
49
50
51; POST drive detection strings
52g_szDashForZero:    db  "- ",NULL   ; Required by Display Library
53g_szRomAt:          db  LF,CR
54                    db  "%s @ %x",LF,CR                     ; -=XTIDE ... =- @ Segment
55                    db  "%s",LF,CR                          ; version string
56                    db  "Released under GNU GPL v2",LF,CR
57                    db  LF,CR,NULL
58%ifdef MODULE_BOOT_MENU
59g_szBootMenuTitle:  db  "%s%c",LF,CR                        ; -=XTIDE ... =- and null (eaten)
60                    db  "%s",NULL                           ; version string
61%endif
62g_szDriveName:      db  "%z",LF,CR,NULL
63
64
65; Boot loader strings
66g_szTryToBoot:          db  "Booting %c",ANGLE_QUOTE_RIGHT,"%c",LF,CR,NULL
67g_szBootSectorNotFound: db  "Boot sector "          ; String fall through...
68g_szNotFound:           db  "not found",LF,CR,NULL
69g_szReadError:          db  "Error %x!",LF,CR,NULL
70
71
72%ifdef MODULE_HOTKEYS
73; Hotkey Bar strings
74g_szFDD:                db  "FDD [%c]",NULL         ; "FDD [A]"
75g_szHDD:                db  "HDD [%c]",NULL         ; "HDD [C]"
76%ifdef MODULE_BOOT_MENU
77g_szBootMenu:           db  "BootMnu%c",NULL        ; "BootMnu", location of %c doesn't matter
78%endif ; MODULE_BOOT_MENU
79g_szHotkey:             db  "%A%c%c%A%s%A ",NULL    ; "C»HDD [A] ", "F2BootMnu " or "F8RomBoot "
80%ifdef MODULE_SERIAL
81g_szHotComDetect:       db  "ComDtct%c",NULL        ; "ComDtct", location of %c doesn't matter
82%endif ; MODULE_SERIAL
83%endif ; MODULE_HOTKEYS
84
85%ifdef MODULE_BOOT_MENU
86g_szRomBootDash:        db  " -  "                  ; String fall through to g_szRomBoot
87%endif
88%ifdef MODULE_HOTKEYS OR MODULE_BOOT_MENU
89g_szRomBoot:            db  "Rom%cBoot",NULL        ; "RomBoot" or "Rom Boot"
90%endif
91
92
93%ifdef MODULE_BOOT_MENU
94; Boot Menu Floppy Disk strings
95;
96; The following strings are used by BootMenuPrint_RefreshInformation
97; To support optimizations in that code, these strings must start on the same 256 byte page,
98; which is checked at assembly time below.
99;
100g_szFddStart:
101g_szFddUnknown:     db  "Unknown",NULL
102g_szFddSizeOr:      db  "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
103g_szFddSize:        db  "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
104g_szFddThreeHalf:   db  "3",ONE_HALF,NULL
105g_szFddEnd:
106g_szFddFiveQuarter: db  "5",ONE_QUARTER,NULL
107
108%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
109    %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
110        %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives.  Please move this block up or down within Strings.asm"
111    %endif
112%endif
113
114
115g_szAddressingModes:
116g_szNORMAL:     db  "NORMAL",NULL
117g_szLARGE:      db  "LARGE ",NULL
118g_szLBA:        db  "LBA   ",NULL
119g_szAddressingModes_Displacement equ (g_szLARGE - g_szAddressingModes)
120;
121; Ensure that addressing modes are correctly spaced in memory
122;
123%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
124    %if g_szNORMAL <> g_szAddressingModes
125        %error "g_szAddressingModes Displacement Incorrect 1"
126    %endif
127    %if g_szLARGE <> g_szNORMAL + g_szAddressingModes_Displacement
128        %error "g_szAddressingModes Displacement Incorrect 2"
129    %endif
130    %if g_szLBA <> g_szLARGE + g_szAddressingModes_Displacement
131        %error "g_szAddressingModes Displacement Incorrect 3"
132    %endif
133%endif
134
135
136g_szDeviceTypeValues:
137g_szDeviceTypeValues_16bit:     db  " 16",NULL
138g_szDeviceTypeValues_32bit:     db  " 32",NULL
139g_szDeviceTypeValues_8bit:      db  "  8",NULL
140g_szDeviceTypeValues_XTIDEr1:   db  "D8 ",NULL  ; Dual 8-bit
141g_szDeviceTypeValues_XTIDEr2:   db  "X8 ",NULL  ; A0<->A3 swapped 8-bit
142g_szDeviceTypeValues_XTCFpio8:  db  "T8 ",NULL  ; True 8-bit
143g_szDeviceTypeValues_XTCFdma:   db  "8MA",NULL  ; DMA 8-bit
144g_szDeviceTypeValues_XTCFmem:   db  "M8 ",NULL  ; Memory Mapped 8-bit
145g_szDeviceTypeValues_JrIde:     db  "M8 ",NULL
146g_szDeviceTypeValues_Serial:    db  "SER",NULL
147
148g_szDeviceTypeValues_Displacement equ (g_szDeviceTypeValues_32bit - g_szDeviceTypeValues)
149;
150; Ensure that device type strings are correctly spaced in memory
151;
152%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
153    %if g_szDeviceTypeValues_16bit <> g_szDeviceTypeValues
154        %error "g_szDeviceTypeValues Displacement Incorrect 1"
155    %endif
156    %if g_szDeviceTypeValues_32bit <> g_szDeviceTypeValues_16bit + g_szDeviceTypeValues_Displacement
157        %error "g_szDeviceTypeValues Displacement Incorrect 2"
158    %endif
159    %if g_szDeviceTypeValues_8bit <> g_szDeviceTypeValues_32bit + g_szDeviceTypeValues_Displacement
160        %error "g_szDeviceTypeValues Displacement Incorrect 2"
161    %endif
162    %if g_szDeviceTypeValues_XTIDEr1 <> g_szDeviceTypeValues_8bit + g_szDeviceTypeValues_Displacement
163        %error "g_szDeviceTypeValues Displacement Incorrect 3"
164    %endif
165    %if g_szDeviceTypeValues_XTIDEr2 <> g_szDeviceTypeValues_XTIDEr1 + g_szDeviceTypeValues_Displacement
166        %error "g_szDeviceTypeValues Displacement Incorrect 4"
167    %endif
168    %if g_szDeviceTypeValues_XTCFpio8 <> g_szDeviceTypeValues_XTIDEr2 + g_szDeviceTypeValues_Displacement
169        %error "g_szDeviceTypeValues Displacement Incorrect 5"
170    %endif
171    %if g_szDeviceTypeValues_XTCFdma <> g_szDeviceTypeValues_XTCFpio8 + g_szDeviceTypeValues_Displacement
172        %error "g_szDeviceTypeValues Displacement Incorrect 6"
173    %endif
174    %if g_szDeviceTypeValues_XTCFmem <> g_szDeviceTypeValues_XTCFdma + g_szDeviceTypeValues_Displacement
175        %error "g_szDeviceTypeValues Displacement Incorrect 7"
176    %endif
177    %if g_szDeviceTypeValues_JrIde <> g_szDeviceTypeValues_XTCFmem + g_szDeviceTypeValues_Displacement
178        %error "g_szDeviceTypeValues Displacement Incorrect 8"
179    %endif
180    %if g_szDeviceTypeValues_Serial <> g_szDeviceTypeValues_JrIde + g_szDeviceTypeValues_Displacement
181        %error "g_szDeviceTypeValues Displacement Incorrect 9"
182    %endif
183%endif
184
185
186g_szSelectionTimeout:   db  DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
187
188
189; Boot Menu information strings
190g_szCapacity:           db  "Capacity : %s",NULL
191g_szCapacityNum:        db  "%5-u.%u %ciB",NULL
192g_szInformation:        db  "%s",LF,CR
193    db  "Addr. ",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL,"IRQ",SINGLE_VERTICAL,"Reset",LF,CR
194    db  "%s",SINGLE_VERTICAL,"%5-u",SINGLE_VERTICAL,"%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x",NULL
195
196
197; Boot Menu menuitem strings
198;
199; The following strings are used by BootMenuPrint_* routines.
200; To support optimizations in that code, these strings must start on the same 256 byte page,
201; which is checked at assembly time below.
202;
203g_szDriveNumSpace:      db  " "                         ; leading space, used if drive number is less than 0fh
204                                                        ; must come immediately before g_szDriveNum!
205g_szBootMenuPrintStart:
206g_szDriveNum:           db  "%x %s",NULL
207g_szDriveNumBNSpace:    db  " "                         ; leading space, used if drive number is less than 0fh
208                                                        ; must come immediately before g_szDriveNumBOOTNFO!
209g_szDriveNumBOOTNFO:    db  "%x %z",NULL
210g_szFloppyDrv:          db  "Floppy Drive %c",NULL
211g_szBootMenuPrintEnd:
212g_szForeignHD:          db  "Foreign Hard Disk",NULL
213
214%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
215    %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
216        %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines.  Please move this block up or down within Strings.asm"
217    %endif
218    %if g_szDriveNumSpace+1 != g_szDriveNum || g_szDriveNumBNSpace+1 != g_szDriveNumBOOTNFO
219        %error "g_szDriveNumSpace or g_szDriveNumBNSpace are out of position"
220    %endif
221%endif
222
223%endif ; MODULE_BOOT_MENU
224
225
226;------------------------------------------------------------------------------------------
227;
228; Tables for StringsCompress.pl
229;
230; Items can be added and removed from this table as needed, with the following rules:
231;  * Formats follow the special characters.  But other than that, order makes no difference.
232;  * Some of the formats require "even" and "odd" numbering.  Even tells the code that
233;    it is a "number-" format, otherwise it doesn't interpret a number first.  The easiest
234;    way to maintain this is to move one of the "n/a" items to/from the front of the format
235;    list to maintain the even/odd.
236;  * Values do not need to remain consistent across versions.  This table is only used
237;    internally to this file.
238;  * There can only be 32 of these (0-31).
239;  * Keeping the list short is good - this translates to a table in the compressed version.
240;    An error will be reported if a character or format is no longer being used by any
241;    strings above.
242;  * Please keep items sequential for ease of further editing.
243;
244;$translate{ord(' ')} = 0;
245;$translate{172}      = 1;     # ONE_QUARTER
246;$translate{171}      = 2;     # ONE_HALF
247;$translate{179}      = 3;     # SINGLE_VERTICAL
248;$translate{175}      = 4;     # ANGLE_QUOTE_RIGHT
249;$translate{ord('!')} = 5;
250;$translate{ord('"')} = 6;
251;$translate{ord(',')} = 7;
252;$translate{ord('-')} = 8;
253;$translate{ord('.')} = 9;
254;$translate{ord('/')} = 10;
255;$translate{ord('1')} = 11;
256;$translate{ord('2')} = 12;
257;$translate{ord('3')} = 13;
258;$translate{ord('5')} = 14;
259;$translate{ord('6')} = 15;
260;$translate{ord('8')} = 16;
261;$translate{200}      = 17;    # DOUBLE_BOTTOM_LEFT_CORNER
262;$translate{181}      = 18;    # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
263;$translate{ord('0')} = 19;
264;
265; Formats begin immediately after the last Translated character (they are in the same table)
266;
267;$format_begin = 20;
268;
269;$format{"2-I"} = 20;        # must be even
270;$format{"u"}   = 21;        # must be odd
271;$format{"5-u"} = 22;        # must be even
272;$format{"x"}   = 23;        # must be odd
273;$format{"5-x"} = 24;        # must be even
274;$format{"nl"}  = 25;        # n/a
275;$format{"2-u"} = 26;        # must be even
276;$format{"A"}   = 27;        # n/a
277;$format{"c"}   = 28;        # n/a
278;$format{"s"}   = 29;        # n/a, normal string from DS
279;$format{"z"}   = 30;        # n/a, boot string from BDA
280;
281; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
282;
283; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
284; letters.  If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
285; front end.
286;
287;$normal_base = 0x3a;
288;
289; End of StringsCompress.pl information
290;
291;------------------------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.