source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm@ 484

Last change on this file since 484 was 473, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Large changes to prepare full XT-CF support (DMA not yet implemented and memory mapped transfers are not working).
File size: 9.6 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Strings and equates for BIOS messages.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
21 %include "Display.inc"
22%endif
23
24; Section containing code
25SECTION .text
26
27; POST drive detection strings
28g_szDashForZero: db "- ",NULL ; Required by Display Library
29g_szRomAt: db LF,CR,"%s @ %x",LF,CR
30 db "Released under GNU GPL v2",LF,CR,LF,CR,NULL
31
32
33; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
34; To support an optimization in that code, these strings must start on the same 256 byte page,
35; which is checked at assembly time below.
36;
37g_szDetectStart:
38g_szDetectMaster: db "Master",NULL
39g_szDetectSlave: db "Slave ",NULL
40g_szDetectOuter: db "%s at %s: ",NULL
41%ifdef MODULE_SERIAL
42g_szDetectCOM: db "COM%c%s",NULL
43g_szDetectCOMAuto: db " Detect",NULL
44g_szDetectCOMSmall: db "/%u%u00",NULL ; IDE Master at COM1/9600:
45g_szDetectCOMLarge: db "/%u.%uK",NULL ; IDE Master at COM1/19.2K:
46%endif
47g_szDetectEnd:
48g_szDetectPort: db "%x",NULL ; IDE Master at 1F0h:
49
50%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
51 %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
52 %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP. Please move this block up or down within strings.asm"
53 %endif
54%endif
55
56
57; Boot loader strings
58g_szTryToBoot: db "Booting %c",ANGLE_QUOTE_RIGHT,"%c",LF,CR,NULL
59g_szBootSectorNotFound: db "Boot sector "
60g_szNotFound: db "not found",LF,CR,NULL
61g_szReadError: db "Error %x!",LF,CR,NULL
62
63
64%ifdef MODULE_HOTKEYS
65
66; Hotkey Bar strings
67g_szFDD: db "FDD [%c]",NULL ; "FDD [A]"
68g_szHDD: db "HDD [%c]",NULL ; "HDD [C]"
69g_szBootMenu: db "%sMnu",NULL ; "BootMnu"
70g_szRomBoot: db "Rom%s",NULL ; "RomBoot"
71g_szBoot: db "Boot",NULL
72g_szHotkey: db "%A%c%c%A%s%A ",NULL ; "C»HDD [A] ", "F2BootMnu " or "F8RomBoot "
73
74
75%ifdef MODULE_BOOT_MENU
76
77; Boot Menu Floppy Disk strings
78;
79; The following strings are used by BootMenuPrint_RefreshInformation
80; To support optimizations in that code, these strings must start on the same 256 byte page,
81; which is checked at assembly time below.
82;
83g_szFddStart:
84g_szFddUnknown: db "Unknown",NULL
85g_szFddSizeOr: db "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
86g_szFddSize: db "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
87g_szFddThreeHalf: db "3",ONE_HALF,NULL
88g_szFddEnd:
89g_szFddFiveQuarter: db "5",ONE_QUARTER,NULL
90
91%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
92 %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
93 %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives. Please move this block up or down within strings.asm"
94 %endif
95%endif
96
97
98g_szAddressingModes:
99g_szNORMAL: db "NORMAL",NULL
100g_szLARGE: db "LARGE ",NULL
101g_szLBA: db "LBA ",NULL
102wantToRemoveThis: db "4",NULL ; String compression want '4' somewhere
103g_szAddressingModes_Displacement equ (g_szLARGE - g_szAddressingModes)
104;
105; Ensure that addressing modes are correctly spaced in memory
106;
107%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
108 %if g_szNORMAL <> g_szAddressingModes
109 %error "g_szAddressingModes Displacement Incorrect 1"
110 %endif
111 %if g_szLARGE <> g_szNORMAL + g_szAddressingModes_Displacement
112 %error "g_szAddressingModes Displacement Incorrect 2"
113 %endif
114 %if g_szLBA <> g_szLARGE + g_szAddressingModes_Displacement
115 %error "g_szAddressingModes Displacement Incorrect 3"
116 %endif
117%endif
118
119g_szDeviceTypeValues:
120g_szDeviceTypeValues_16bit: db " 16",NULL
121g_szDeviceTypeValues_32bit: db " 32",NULL
122g_szDeviceTypeValues_XTIDEr1: db "D8 ",NULL ; Dual 8-bit
123g_szDeviceTypeValues_XTIDEr2: db "X8 ",NULL ; A0<->A3 swapped 8-bit
124g_szDeviceTypeValues_XTCFpio8: db "T8 ",NULL ; True 8-bit
125g_szDeviceTypeValues_XTCFdma: db "8MA",NULL ; DMA 8-bit
126g_szDeviceTypeValues_XTCFmem: db "M8 ",NULL ; Memory Mapped 8-bit
127g_szDeviceTypeValues_JrIde: db "M8 ",NULL
128g_szDeviceTypeValues_Serial: db "SER",NULL
129
130g_szDeviceTypeValues_Displacement equ (g_szDeviceTypeValues_32bit - g_szDeviceTypeValues)
131;
132; Ensure that device type strings are correctly spaced in memory
133;
134%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
135 %if g_szDeviceTypeValues_16bit <> g_szDeviceTypeValues
136 %error "g_szDeviceTypeValues Displacement Incorrect 1"
137 %endif
138 %if g_szDeviceTypeValues_32bit <> g_szDeviceTypeValues + g_szDeviceTypeValues_Displacement
139 %error "g_szDeviceTypeValues Displacement Incorrect 2"
140 %endif
141 %if g_szDeviceTypeValues_XTIDEr1 <> g_szDeviceTypeValues_32bit + g_szDeviceTypeValues_Displacement
142 %error "g_szDeviceTypeValues Displacement Incorrect 3"
143 %endif
144 %if g_szDeviceTypeValues_XTIDEr2 <> g_szDeviceTypeValues_XTIDEr1 + g_szDeviceTypeValues_Displacement
145 %error "g_szDeviceTypeValues Displacement Incorrect 4"
146 %endif
147 %if g_szDeviceTypeValues_XTCFpio8 <> g_szDeviceTypeValues_XTIDEr2 + g_szDeviceTypeValues_Displacement
148 %error "g_szDeviceTypeValues Displacement Incorrect 5"
149 %endif
150 %if g_szDeviceTypeValues_XTCFdma <> g_szDeviceTypeValues_XTCFpio8 + g_szDeviceTypeValues_Displacement
151 %error "g_szDeviceTypeValues Displacement Incorrect 6"
152 %endif
153 %if g_szDeviceTypeValues_XTCFmem <> g_szDeviceTypeValues_XTCFdma + g_szDeviceTypeValues_Displacement
154 %error "g_szDeviceTypeValues Displacement Incorrect 7"
155 %endif
156 %if g_szDeviceTypeValues_JrIde <> g_szDeviceTypeValues_XTCFmem + g_szDeviceTypeValues_Displacement
157 %error "g_szDeviceTypeValues Displacement Incorrect 8"
158 %endif
159 %if g_szDeviceTypeValues_Serial <> g_szDeviceTypeValues_JrIde + g_szDeviceTypeValues_Displacement
160 %error "g_szDeviceTypeValues Displacement Incorrect 9"
161 %endif
162%endif
163
164g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
165
166
167
168
169; Boot Menu information strings
170g_szCapacity: db "Capacity : %s",NULL
171g_szCapacityNum: db "%5-u.%u %ciB",NULL
172g_szInformation: db "%s",LF,CR
173 db "Addr. ",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL, "IRQ",SINGLE_VERTICAL,"Reset",LF,CR
174 db "%s",SINGLE_VERTICAL, "%5-u",SINGLE_VERTICAL, "%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x" ,NULL
175
176
177; Boot Menu menuitem strings
178;
179; The following strings are used by BootMenuPrint_* routines.
180; To support optimizations in that code, these strings must start on the same 256 byte page,
181; which is checked at assembly time below.
182;
183g_szBootMenuPrintStart:
184g_szDriveNum: db "%x %s",NULL
185g_szDriveNumBOOTNFO: db "%x %z",NULL
186g_szFloppyDrv: db "Floppy Drive %c",NULL
187g_szBootMenuPrintEnd:
188g_szForeignHD: db "Foreign Hard Disk",NULL
189
190%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
191 %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
192 %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines. Please move this block up or down within strings.asm"
193 %endif
194%endif
195
196%endif ; MODULE_BOOT_MENU
197%endif ; MODULE_HOTKEYS
198
199
200;------------------------------------------------------------------------------------------
201;
202; Tables for StringsCompress.pl
203;
204;$translate{ord(' ')} = 0;
205;$translate{172} = 1; # ONE_QUARTER
206;$translate{171} = 2; # ONE_HALF
207;$translate{179} = 3; # SINGLE_VERTICAL
208;$translate{175} = 4; # ANGLE_QUOTE_RIGHT
209;$translate{ord('!')} = 5;
210;$translate{ord('"')} = 6;
211;$translate{ord(',')} = 7;
212;$translate{ord('-')} = 8;
213;$translate{ord('.')} = 9;
214;$translate{ord('/')} = 10;
215;$translate{ord('1')} = 11;
216;$translate{ord('2')} = 12;
217;$translate{ord('3')} = 13;
218;$translate{ord('4')} = 14; ; Not used at the moment
219;$translate{ord('5')} = 15;
220;$translate{ord('6')} = 16;
221;$translate{ord('8')} = 17;
222;$translate{200} = 18; # DOUBLE_BOTTOM_LEFT_CORNER
223;$translate{181} = 19; # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
224;$translate{ord('0')} = 20;
225;
226; Formats begin immediately after the last Translated character (they are in the same table)
227;
228;$format_begin = 21;
229;
230;$format{"c"} = 21; # n/a
231;$format{"2-I"} = 22; # must be even
232;$format{"u"} = 23; # must be odd
233;$format{"5-u"} = 24; # must be even
234;$format{"x"} = 25; # must be odd
235;$format{"5-x"} = 26; # must be even
236;$format{"nl"} = 27; # n/a
237;$format{"2-u"} = 28; # must be even
238;$format{"A"} = 29; # n/a
239;$format{"s"} = 30; # n/a, normal string from DS
240;$format{"z"} = 31; # n/a, boot string from BDA
241;
242; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
243;
244; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
245; letters. If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
246; front end.
247;
248;$normal_base = 0x3a;
249;
250; End of StringsCompress.pl information
251;
252;------------------------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.