source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm @ 415

Last change on this file since 415 was 415, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Strings.asm updated for MODULE_BOOT_MENU and MODULE_HOTKEYS.
File size: 9.1 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Strings and equates for BIOS messages.
3
4;
5; XTIDE Universal BIOS and Associated Tools 
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12; 
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html       
18;       
19
20%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
21    %include "Display.inc"
22%endif
23
24; Section containing code
25SECTION .text
26
27; POST drive detection strings
28g_szDashForZero:    db  "- ",NULL   ; Required by Display Library
29g_szRomAt:          db  LF,CR,"%s @ %x",LF,CR
30                    db  "Released under GNU GPL v2",LF,CR,LF,CR,NULL
31
32
33; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
34; To support an optimization in that code, these strings must start on the same 256 byte page,
35; which is checked at assembly time below.
36;
37g_szDetectStart:
38g_szDetectMaster:       db  "Master",NULL
39g_szDetectSlave:        db  "Slave ",NULL
40g_szDetectOuter:        db  "%s at %s: ",NULL
41%ifdef MODULE_SERIAL
42g_szDetectCOM:          db  "COM%c%s",NULL
43g_szDetectCOMAuto:      db  " Detect",NULL
44g_szDetectCOMSmall:     db  "/%u%u00",NULL                  ; IDE Master at COM1/9600:
45g_szDetectCOMLarge:     db  "/%u.%uK",NULL                  ; IDE Master at COM1/19.2K:
46%endif
47g_szDetectEnd:
48g_szDetectPort:         db  "%x",NULL                       ; IDE Master at 1F0h:
49
50%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
51    %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
52        %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP.  Please move this block up or down within strings.asm"
53    %endif
54%endif
55
56
57; Boot loader strings
58g_szTryToBoot:          db  "Booting %c",ANGLE_QUOTE_RIGHT,"%c",LF,CR,NULL
59g_szBootSectorNotFound: db  "Boot sector "
60g_szNotFound:           db  "not found",LF,CR,NULL
61g_szReadError:          db  "Error %x!",LF,CR,NULL
62
63
64%ifdef MODULE_HOTKEYS
65
66; Hotkey Bar strings
67g_szFDD:        db  "FDD [%c]",NULL         ; "FDD [A]"
68g_szHDD:        db  "HDD [%c]",NULL         ; "HDD [C]"
69g_szBootMenu:   db  "%sMnu",NULL            ; "BootMnu"
70g_szRomBoot:    db  "Rom%s",NULL            ; "RomBoot"
71g_szBoot:       db  "Boot",NULL
72g_szHotkey:     db  "%A%c%c%A%s%A ",NULL    ; "C»HDD [A] ", "F2BootMnu " or "F8RomBoot "
73
74
75%ifdef MODULE_BOOT_MENU
76
77; Boot Menu Floppy Disk strings
78;
79; The following strings are used by BootMenuPrint_RefreshInformation
80; To support optimizations in that code, these strings must start on the same 256 byte page,
81; which is checked at assembly time below.
82;
83g_szFddStart:
84g_szFddUnknown: db  "Unknown",NULL
85g_szFddSizeOr:  db  "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
86g_szFddSize:    db  "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
87g_szFddThreeHalf:       db  "3",ONE_HALF,NULL
88g_szFddEnd:
89g_szFddFiveQuarter:     db  "5",ONE_QUARTER,NULL
90
91%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
92    %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
93        %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives.  Please move this block up or down within strings.asm"
94    %endif
95%endif
96
97
98g_szAddressingModes:
99g_szLCHS:       db  "L-CHS",NULL
100g_szPCHS:       db  "P-CHS",NULL
101g_szLBA28:      db  "LBA28",NULL
102g_szLBA48:      db  "LBA48",NULL
103g_szAddressingModes_Displacement equ (g_szPCHS - g_szAddressingModes)
104;
105; Ensure that addressing modes are correctly spaced in memory
106;
107%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
108    %if g_szLCHS <> g_szAddressingModes
109        %error "g_szAddressingModes Displacement Incorrect 1"
110    %endif
111    %if g_szPCHS <> g_szLCHS + g_szAddressingModes_Displacement
112        %error "g_szAddressingModes Displacement Incorrect 2"
113    %endif
114    %if g_szLBA28 <> g_szPCHS + g_szAddressingModes_Displacement
115        %error "g_szAddressingModes Displacement Incorrect 3"
116    %endif
117    %if g_szLBA48 <> g_szLBA28 + g_szAddressingModes_Displacement
118        %error "g_szAddressingModes Displacement Incorrect 4"
119    %endif
120%endif
121
122g_szBusTypeValues:
123g_szBusTypeValues_8Dual:        db      "D8 ",NULL
124g_szBusTypeValues_8Reversed:    db      "X8 ",NULL
125g_szBusTypeValues_8Single:      db      "S8 ",NULL
126g_szBusTypeValues_16:           db      " 16",NULL
127g_szBusTypeValues_32:           db      " 32",NULL
128g_szBusTypeValues_Serial:       db      "SER",NULL
129g_szBusTypeValues_8MemMapped:   db      "M8 ",NULL
130g_szBusTypeValues_Displacement equ (g_szBusTypeValues_8Reversed - g_szBusTypeValues)
131;
132; Ensure that bus type strings are correctly spaced in memory
133;
134%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
135    %if g_szBusTypeValues_8Dual <> g_szBusTypeValues
136        %error "g_szBusTypeValues Displacement Incorrect 1"
137    %endif
138    %if g_szBusTypeValues_8Reversed <> g_szBusTypeValues + g_szBusTypeValues_Displacement
139        %error "g_szBusTypeValues Displacement Incorrect 2"
140    %endif
141    %if g_szBusTypeValues_8Single <> g_szBusTypeValues_8Reversed + g_szBusTypeValues_Displacement
142        %error "g_szBusTypeValues Displacement Incorrect 3"
143    %endif
144    %if g_szBusTypeValues_16 <> g_szBusTypeValues_8Single + g_szBusTypeValues_Displacement
145        %error "g_szBusTypeValues Displacement Incorrect 4"
146    %endif
147    %if g_szBusTypeValues_32 <> g_szBusTypeValues_16 + g_szBusTypeValues_Displacement
148        %error "g_szBusTypeValues Displacement Incorrect 5"
149    %endif
150    %if g_szBusTypeValues_Serial <> g_szBusTypeValues_32 + g_szBusTypeValues_Displacement
151        %error "g_szBusTypeValues Displacement Incorrect 6"
152    %endif
153    %if g_szBusTypeValues_8MemMapped <> g_szBusTypeValues_Serial + g_szBusTypeValues_Displacement
154        %error "g_szBusTypeValues Displacement Incorrect 7"
155    %endif
156%endif
157
158g_szSelectionTimeout:   db      DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
159
160
161
162
163; Boot Menu information strings
164g_szCapacity:           db  "Capacity : %s",NULL
165g_szCapacityNum:        db  "%5-u.%u %ciB",NULL
166g_szInformation:        db  "%s",LF,CR
167    db  "Addr.",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL,  "IRQ",SINGLE_VERTICAL,"Reset",LF,CR
168    db     "%s",SINGLE_VERTICAL, "%5-u",SINGLE_VERTICAL, "%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x" ,NULL
169
170
171; Boot Menu menuitem strings
172;
173; The following strings are used by BootMenuPrint_* routines.
174; To support optimizations in that code, these strings must start on the same 256 byte page,
175; which is checked at assembly time below.
176;
177g_szBootMenuPrintStart:
178g_szDriveNum:           db  "%x %s",NULL
179g_szDriveNumBOOTNFO:    db  "%x %z",NULL
180g_szFloppyDrv:          db  "Floppy Drive %c",NULL
181g_szBootMenuPrintEnd:
182g_szForeignHD:          db  "Foreign Hard Disk",NULL
183
184%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
185    %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
186        %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines.  Please move this block up or down within strings.asm"
187    %endif
188%endif
189
190%endif ; MODULE_BOOT_MENU
191%endif ; MODULE_HOTKEYS
192
193
194;------------------------------------------------------------------------------------------
195;
196; Tables for StringsCompress.pl
197;
198;$translate{ord(' ')} = 0;
199;$translate{172}      = 1;     # ONE_QUARTER
200;$translate{171}      = 2;     # ONE_HALF
201;$translate{179}      = 3;     # SINGLE_VERTICAL
202;$translate{175}      = 4;     # ANGLE_QUOTE_RIGHT
203;$translate{ord('!')} = 5;
204;$translate{ord('"')} = 6;
205;$translate{ord(',')} = 7;
206;$translate{ord('-')} = 8;
207;$translate{ord('.')} = 9;
208;$translate{ord('/')} = 10;
209;$translate{ord('1')} = 11;
210;$translate{ord('2')} = 12;
211;$translate{ord('3')} = 13;
212;$translate{ord('4')} = 14;
213;$translate{ord('5')} = 15;
214;$translate{ord('6')} = 16;
215;$translate{ord('8')} = 17;
216;$translate{200}      = 18;    # DOUBLE_BOTTOM_LEFT_CORNER
217;$translate{181}      = 19;    # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
218;$translate{ord('0')} = 20;
219;
220; Formats begin immediately after the last Translated character (they are in the same table)
221;
222;$format_begin = 21;
223;
224;$format{"c"}   = 21;        # n/a
225;$format{"2-I"} = 22;        # must be even
226;$format{"u"}   = 23;        # must be odd
227;$format{"5-u"} = 24;        # must be even
228;$format{"x"}   = 25;        # must be odd
229;$format{"5-x"} = 26;        # must be even
230;$format{"nl"}  = 27;        # n/a
231;$format{"2-u"} = 28;        # must be even
232;$format{"A"}   = 29;        # n/a
233;$format{"s"}   = 30;        # n/a, normal string from DS
234;$format{"z"}   = 31;        # n/a, boot string from BDA
235;
236; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
237;
238; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
239; letters.  If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
240; front end.
241;
242;$normal_base = 0x3a;
243;
244; End of StringsCompress.pl information
245;
246;------------------------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.