source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm@ 195

Last change on this file since 195 was 194, checked in by gregli@…, 13 years ago

ifdef'd out more unused code. Also added a tool for looking through the listing and the output of the precompiler to aid in finding dead code. Some changes in the files are to add annotations for the tool to avoid false positives.

File size: 4.1 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Strings and equates for BIOS messages.
3
4%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
5%include "Display.inc"
6%endif
7
8; Section containing code
9SECTION .text
10
11; POST drive detection strings
12g_szRomAt: db "%s @ %x",LF,CR,NULL
13g_szMaster: db "Master",NULL
14g_szSlave: db "Slave ",NULL
15g_szDetect: db "IDE %s at %x: ",NULL ; IDE Master at 1F0h:
16g_szSerial: db "Serial Port %s: ",NULL
17
18; Boot loader strings
19g_szTryToBoot: db "Booting from %s %x",ANGLE_QUOTE_RIGHT,"%x",LF,CR,NULL
20g_szBootSectorNotFound: db "Boot sector "
21g_szNotFound: db "not found",LF,CR,NULL
22g_szReadError: db "Error %x!",LF,CR,NULL
23
24; Boot menu bottom of screen strings
25g_szFDD: db "FDD ",NULL
26g_szHDD: db "HDD ",NULL
27g_szRomBoot: db "ROM Boot",NULL
28g_szHotkey: db "%A%c%c%A%s%A ",NULL
29
30
31; Boot Menu menuitem strings
32g_szDriveNum: db "%x ",NULL
33g_szFDLetter: db "%s %c",NULL
34g_szFloppyDrv: db "Floppy Drive",NULL
35g_szforeignHD: db "Foreign Hard Disk",NULL
36
37; Boot Menu information strings
38g_szCapacity: db "Capacity : ",NULL
39g_szSizeSingle: db "%s%u.%u %ciB",NULL
40g_szSizeDual: db "%s%5-u.%u %ciB /%5-u.%u %ciB",LF,CR,NULL
41g_szCfgHeader: db "Addr.",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus", SINGLE_VERTICAL,"IRQ", SINGLE_VERTICAL,"Reset",LF,CR,NULL
42g_szCfgFormat: db "%s" ,SINGLE_VERTICAL,"%5-u", SINGLE_VERTICAL,"%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x", NULL
43
44g_szAddressingModes:
45g_szLCHS: db "L-CHS",NULL
46g_szPCHS: db "P-CHS",NULL
47g_szLBA28: db "LBA28",NULL
48g_szLBA48: db "LBA48",NULL
49g_szAddressingModes_Displacement equ (g_szPCHS - g_szAddressingModes)
50;
51; Ensure that addressing modes are correctly spaced in memory
52;
53%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
54%if g_szLCHS <> g_szAddressingModes
55%error "g_szAddressingModes Displacement Incorrect 1"
56%endif
57%if g_szPCHS <> g_szLCHS + g_szAddressingModes_Displacement
58%error "g_szAddressingModes Displacement Incorrect 2"
59%endif
60%if g_szLBA28 <> g_szPCHS + g_szAddressingModes_Displacement
61%error "g_szAddressingModes Displacement Incorrect 3"
62%endif
63%if g_szLBA48 <> g_szLBA28 + g_szAddressingModes_Displacement
64%error "g_szAddressingModes Displacement Incorrect 4"
65%endif
66%endif
67
68g_szFddUnknown: db "%sUnknown",NULL
69g_szFddSizeOr: db "%s5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
70g_szFddSize: db "%s%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
71
72g_szFddThreeHalf: db "3",ONE_HALF,NULL
73g_szFddFiveQuarter: db "5",ONE_QUARTER,NULL
74g_szFddThreeFive_Displacement equ (g_szFddFiveQuarter - g_szFddThreeHalf)
75
76g_szBusTypeValues:
77g_szBusTypeValues_8Dual: db "D8 ",NULL
78g_szBusTypeValues_8Reversed: db "X8 ",NULL
79g_szBusTypeValues_8Single: db "S8 ",NULL
80g_szBusTypeValues_16: db " 16",NULL
81g_szBusTypeValues_32: db " 32",NULL
82g_szBusTypeValues_Serial: db "SER",NULL
83g_szBusTypeValues_Displacement equ (g_szBusTypeValues_8Reversed - g_szBusTypeValues)
84;
85; Ensure that bus type strings are correctly spaced in memory
86;
87%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
88%if g_szBusTypeValues_8Dual <> g_szBusTypeValues
89%error "g_szBusTypeValues Displacement Incorrect 1"
90%endif
91%if g_szBusTypeValues_8Reversed <> g_szBusTypeValues + g_szBusTypeValues_Displacement
92%error "g_szBusTypeValues Displacement Incorrect 2"
93%endif
94%if g_szBusTypeValues_8Single <> g_szBusTypeValues_8Reversed + g_szBusTypeValues_Displacement
95%error "g_szBusTypeValues Displacement Incorrect 3"
96%endif
97%if g_szBusTypeValues_16 <> g_szBusTypeValues_8Single + g_szBusTypeValues_Displacement
98%error "g_szBusTypeValues Displacement Incorrect 4"
99%endif
100%if g_szBusTypeValues_32 <> g_szBusTypeValues_16 + g_szBusTypeValues_Displacement
101%error "g_szBusTypeValues Displacement Incorrect 5"
102%endif
103%if g_szBusTypeValues_Serial <> g_szBusTypeValues_32 + g_szBusTypeValues_Displacement
104%error "g_szBusTypeValues Displacement Incorrect 6"
105%endif
106%endif
107
108g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
109
110g_szDashForZero: db "- ",NULL
Note: See TracBrowser for help on using the repository browser.