source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm@ 619

Last change on this file since 619 was 603, checked in by Krister Nordvall, 4 years ago

Changes:

  • Fixed a bug in Strings.asm from r589 where building the BIOS without MODULE_STRINGS_COMPRESSED would fail. Also removed a redundant CR to save a byte when building without MODULE_STRINGS_COMPRESSED.
  • Optimized the code in MODULE_HOTKEYS to reduce ROM space usage, stack usage and time spent in the user timer tick interrupt handler (1Ch). I hope this will fix the problem with hangs introduced in r599.
File size: 13.6 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Strings and equates for BIOS messages.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
21 %include "Display.inc"
22%endif
23
24; Section containing code
25SECTION .text
26
27; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
28; To support an optimization in that code, these strings must start on the same 256 byte page,
29; which is checked at assembly time below.
30;
31g_szDetectStart:
32g_szDetectMaster: db "Master",NULL
33g_szDetectSlave: db "Slave ",NULL
34g_szDetectOuter: db "%s at %s: ",NULL
35%ifdef MODULE_SERIAL
36g_szDetectCOM: db "COM%c%s",NULL
37g_szDetectCOMAuto: db " Detect",NULL
38g_szDetectCOMSmall: db "/%u%u00",NULL ; IDE Master at COM1/9600:
39g_szDetectCOMLarge: db "/%u.%uK",NULL ; IDE Master at COM1/19.2K:
40%endif
41g_szDetectEnd:
42g_szDetectPort: db "%x",NULL ; IDE Master at 1F0h:
43
44%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
45 %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
46 %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP. Please move this block up or down within Strings.asm"
47 %endif
48%endif
49
50
51; POST drive detection strings
52g_szDashForZero: db "- ",NULL ; Required by Display Library
53g_szRomAt: db LF,CR
54 db "%s @ %x",LF,CR ; -=XTIDE ... =- @ Segment
55 db "%s",LF,CR ; version string
56%ifdef MODULE_STRINGS_COMPRESSED
57 db "Released under GNU GPL v2",LF,CR
58%else
59 db "Released under GNU GPL v2",LF
60%endif
61 db LF,CR,NULL
62%ifdef MODULE_BOOT_MENU
63g_szBootMenuTitle: db "%s%c",LF,CR ; -=XTIDE ... =- and null (eaten)
64 db "%s",NULL ; version string
65%endif
66g_szDriveName: db "%z",LF,CR,NULL
67
68
69; Boot loader strings
70g_szTryToBoot: db "Booting %c",ANGLE_QUOTE_RIGHT,"%c",LF,CR,NULL
71g_szBootSectorNotFound: db "Boot sector " ; String fall through...
72g_szNotFound: db "not found",LF,CR,NULL
73g_szReadError: db "Error %x!",LF,CR,NULL
74
75
76%ifdef MODULE_HOTKEYS
77; Hotkey Bar strings
78g_szFDD: db "FDD [%c]",NULL ; "FDD [A]"
79g_szHDD: db "HDD [%c]",NULL ; "HDD [C]"
80%ifdef MODULE_BOOT_MENU
81g_szBootMenu: db "BootMnu%c",NULL ; "BootMnu", location of %c doesn't matter
82%endif ; MODULE_BOOT_MENU
83g_szHotkey: db "%A%c%c%A%s%A ",NULL ; "C»HDD [A] ", "F2BootMnu " or "F8RomBoot "
84%ifdef MODULE_SERIAL
85g_szHotComDetect: db "ComDtct%c",NULL ; "ComDtct", location of %c doesn't matter
86%endif ; MODULE_SERIAL
87%endif ; MODULE_HOTKEYS
88
89%ifdef MODULE_BOOT_MENU
90g_szRomBootDash: db " - " ; String fall through to g_szRomBoot
91%endif
92%ifdef MODULE_HOTKEYS OR MODULE_BOOT_MENU
93g_szRomBoot: db "Rom%cBoot",NULL ; "RomBoot" or "Rom Boot"
94%endif
95
96
97%ifdef MODULE_BOOT_MENU
98; Boot Menu Floppy Disk strings
99;
100; The following strings are used by BootMenuPrint_RefreshInformation
101; To support optimizations in that code, these strings must start on the same 256 byte page,
102; which is checked at assembly time below.
103;
104g_szFddStart:
105g_szFddUnknown: db "Unknown",NULL
106g_szFddSizeOr: db "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
107g_szFddSize: db "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
108g_szFddThreeHalf: db "3",ONE_HALF,NULL
109g_szFddEnd:
110g_szFddFiveQuarter: db "5",ONE_QUARTER,NULL
111
112%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
113 %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
114 %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives. Please move this block up or down within Strings.asm"
115 %endif
116%endif
117
118
119g_szAddressingModes:
120g_szNORMAL: db "NORMAL",NULL
121g_szLARGE: db "LARGE ",NULL
122g_szLBA: db "LBA ",NULL
123g_szAddressingModes_Displacement equ (g_szLARGE - g_szAddressingModes)
124;
125; Ensure that addressing modes are correctly spaced in memory
126;
127%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
128 %if g_szNORMAL <> g_szAddressingModes
129 %error "g_szAddressingModes Displacement Incorrect 1"
130 %endif
131 %if g_szLARGE <> g_szNORMAL + g_szAddressingModes_Displacement
132 %error "g_szAddressingModes Displacement Incorrect 2"
133 %endif
134 %if g_szLBA <> g_szLARGE + g_szAddressingModes_Displacement
135 %error "g_szAddressingModes Displacement Incorrect 3"
136 %endif
137%endif
138
139
140g_szDeviceTypeValues:
141g_szDeviceTypeValues_16bit: db " 16",NULL
142%ifdef MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
143g_szDeviceTypeValues_32bit: db " 32",NULL
144%ifdef MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
145g_szDeviceTypeValues_8bit: db " 8",NULL
146g_szDeviceTypeValues_XTIDEr1: db "D8 ",NULL ; Dual 8-bit
147g_szDeviceTypeValues_XTIDEr2: db "X8 ",NULL ; A0<->A3 swapped 8-bit
148g_szDeviceTypeValues_XTIDEr2_Olivetti: db "X8O",NULL ; Same as above but in Olivetti M24 and derivatives
149%ifdef MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
150g_szDeviceTypeValues_XTCFpio8: db "T8 ",NULL ; True 8-bit
151g_szDeviceTypeValues_XTCFpio8BIU: db "T8B",NULL
152g_szDeviceTypeValues_XTCFpio16BIU: db "16B",NULL
153g_szDeviceTypeValues_XTCFdma: db "8MA",NULL ; DMA 8-bit
154g_szDeviceTypeValues_JrIde: db "M8 ",NULL ; Memory Mapped 8-bit
155g_szDeviceTypeValues_ADP50L: db "M8 ",NULL ; Memory Mapped 8-bit
156%ifdef MODULE_SERIAL
157g_szDeviceTypeValues_Serial: db "SER",NULL
158%endif ; MODULE_SERIAL
159%endif ; MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
160%endif ; MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
161%endif ; MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
162
163%ifdef MODULE_STRINGS_COMPRESSED
164 g_szDeviceTypeValues_Displacement equ 3
165%else
166 g_szDeviceTypeValues_Displacement equ 4
167%endif
168;
169; Ensure that device type strings are correctly spaced in memory
170;
171%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
172 %if g_szDeviceTypeValues_16bit <> g_szDeviceTypeValues
173 %error "g_szDeviceTypeValues Displacement Incorrect 1"
174 %endif
175
176 %ifdef MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
177
178 %if g_szDeviceTypeValues_32bit <> g_szDeviceTypeValues_16bit + g_szDeviceTypeValues_Displacement
179 %error "g_szDeviceTypeValues Displacement Incorrect 2"
180 %endif
181
182 %ifdef MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
183
184 %if g_szDeviceTypeValues_8bit <> g_szDeviceTypeValues_32bit + g_szDeviceTypeValues_Displacement
185 %error "g_szDeviceTypeValues Displacement Incorrect 3"
186 %endif
187 %if g_szDeviceTypeValues_XTIDEr1 <> g_szDeviceTypeValues_8bit + g_szDeviceTypeValues_Displacement
188 %error "g_szDeviceTypeValues Displacement Incorrect 4"
189 %endif
190 %if g_szDeviceTypeValues_XTIDEr2 <> g_szDeviceTypeValues_XTIDEr1 + g_szDeviceTypeValues_Displacement
191 %error "g_szDeviceTypeValues Displacement Incorrect 5"
192 %endif
193 %if g_szDeviceTypeValues_XTIDEr2_Olivetti <> g_szDeviceTypeValues_XTIDEr2 + g_szDeviceTypeValues_Displacement
194 %error "g_szDeviceTypeValues Displacement Incorrect 6"
195 %endif
196
197 %ifdef MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
198
199 %if g_szDeviceTypeValues_XTCFpio8 <> g_szDeviceTypeValues_XTIDEr2_Olivetti + g_szDeviceTypeValues_Displacement
200 %error "g_szDeviceTypeValues Displacement Incorrect 7"
201 %endif
202 %if g_szDeviceTypeValues_XTCFpio8BIU <> g_szDeviceTypeValues_XTCFpio8 + g_szDeviceTypeValues_Displacement
203 %error "g_szDeviceTypeValues Displacement Incorrect 8"
204 %endif
205 %if g_szDeviceTypeValues_XTCFpio16BIU <> g_szDeviceTypeValues_XTCFpio8BIU + g_szDeviceTypeValues_Displacement
206 %error "g_szDeviceTypeValues Displacement Incorrect 9"
207 %endif
208 %if g_szDeviceTypeValues_XTCFdma <> g_szDeviceTypeValues_XTCFpio16BIU + g_szDeviceTypeValues_Displacement
209 %error "g_szDeviceTypeValues Displacement Incorrect 10"
210 %endif
211 %if g_szDeviceTypeValues_JrIde <> g_szDeviceTypeValues_XTCFdma + g_szDeviceTypeValues_Displacement
212 %error "g_szDeviceTypeValues Displacement Incorrect 11"
213 %endif
214 %if g_szDeviceTypeValues_ADP50L <> g_szDeviceTypeValues_JrIde + g_szDeviceTypeValues_Displacement
215 %error "g_szDeviceTypeValues Displacement Incorrect 12"
216 %endif
217
218 %ifdef MODULE_SERIAL
219
220 %if g_szDeviceTypeValues_Serial <> g_szDeviceTypeValues_ADP50L + g_szDeviceTypeValues_Displacement
221 %error "g_szDeviceTypeValues Displacement Incorrect 13"
222 %endif
223
224 %endif ; MODULE_SERIAL
225 %endif ; MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
226 %endif ; MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
227 %endif ; MODULE_ADVANCED_ATA OR MODULE_8BIT_IDE OR MODULE_8BIT_IDE_ADVANCED OR MODULE_SERIAL
228
229%endif
230
231
232g_szSelectionTimeout: db DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
233
234
235; Boot Menu menuitem strings
236;
237; The following strings are used by BootMenuPrint_* routines.
238; To support optimizations in that code, these strings must start on the same 256 byte page,
239; which is checked at assembly time below.
240;
241g_szDriveNumSpace: db " " ; leading space, used if drive number is less than 0fh
242 ; must come immediately before g_szDriveNum!
243g_szBootMenuPrintStart:
244g_szDriveNum: db "%x %s",NULL
245g_szDriveNumBNSpace: db " " ; leading space, used if drive number is less than 0fh
246 ; must come immediately before g_szDriveNumBOOTNFO!
247g_szDriveNumBOOTNFO: db "%x %z",NULL
248g_szFloppyDrv: db "Floppy Drive %c",NULL
249g_szBootMenuPrintEnd:
250g_szForeignHD: db "Foreign Hard Disk",NULL
251
252%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
253 %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
254 %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines. Please move this block up or down within Strings.asm"
255 %endif
256 %if g_szDriveNumSpace+1 != g_szDriveNum || g_szDriveNumBNSpace+1 != g_szDriveNumBOOTNFO
257 %error "g_szDriveNumSpace or g_szDriveNumBNSpace are out of position"
258 %endif
259%endif
260
261
262; Boot Menu information strings
263g_szCapacity: db "Capacity : %s",NULL
264g_szCapacityNum: db "%5-u.%u %ciB",NULL
265g_szInformation: db "%s",LF,CR
266 db "Addr. ",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL,"IRQ",SINGLE_VERTICAL,"Reset",LF,CR
267 db "%s",SINGLE_VERTICAL,"%5-u",SINGLE_VERTICAL,"%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x",NULL
268
269%endif ; MODULE_BOOT_MENU
270
271
272;------------------------------------------------------------------------------------------
273;
274; Tables for StringsCompress.pl
275;
276; Items can be added and removed from this table as needed, with the following rules:
277; * Formats follow the special characters. But other than that, order makes no difference.
278; * Some of the formats require "even" and "odd" numbering. Even tells the code that
279; it is a "number-" format, otherwise it doesn't interpret a number first. The easiest
280; way to maintain this is to move one of the "n/a" items to/from the front of the format
281; list to maintain the even/odd.
282; * Values do not need to remain consistent across versions. This table is only used
283; internally to this file.
284; * There can only be 32 of these (0-31).
285; * Keeping the list short is good - this translates to a table in the compressed version.
286; An error will be reported if a character or format is no longer being used by any
287; strings above.
288; * Please keep items sequential for ease of further editing.
289;
290;$translate{ord(' ')} = 0;
291;$translate{172} = 1; # ONE_QUARTER
292;$translate{171} = 2; # ONE_HALF
293;$translate{179} = 3; # SINGLE_VERTICAL
294;$translate{175} = 4; # ANGLE_QUOTE_RIGHT
295;$translate{ord('!')} = 5;
296;$translate{ord('"')} = 6;
297;$translate{ord(',')} = 7;
298;$translate{ord('-')} = 8;
299;$translate{ord('.')} = 9;
300;$translate{ord('/')} = 10;
301;$translate{ord('1')} = 11;
302;$translate{ord('2')} = 12;
303;$translate{ord('3')} = 13;
304;$translate{ord('5')} = 14;
305;$translate{ord('6')} = 15;
306;$translate{ord('8')} = 16;
307;$translate{200} = 17; # DOUBLE_BOTTOM_LEFT_CORNER
308;$translate{181} = 18; # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
309;$translate{ord('0')} = 19;
310;
311; Formats begin immediately after the last Translated character (they are in the same table)
312;
313;$format_begin = 20;
314;
315;$format{"2-I"} = 20; # must be even
316;$format{"u"} = 21; # must be odd
317;$format{"5-u"} = 22; # must be even
318;$format{"x"} = 23; # must be odd
319;$format{"5-x"} = 24; # must be even
320;$format{"nl"} = 25; # n/a
321;$format{"2-u"} = 26; # must be even
322;$format{"A"} = 27; # n/a
323;$format{"c"} = 28; # n/a
324;$format{"s"} = 29; # n/a, normal string from DS
325;$format{"z"} = 30; # n/a, boot string from BDA
326;
327; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
328;
329; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
330; letters. If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
331; front end.
332;
333;$normal_base = 0x3a;
334;
335; End of StringsCompress.pl information
336;
337;------------------------------------------------------------------------------------------
Note: See TracBrowser for help on using the repository browser.