source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm@ 312

; Project name  :   XTIDE Universal BIOS
; Description   :   Strings and equates for BIOS messages.

%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
    %include "Display.inc"
%endif

; Section containing code
SECTION .text

; Boot Menu Floppy Disk strings
;
; The following strings are used by BootMenuPrint_RefreshInformation
; To support optimizations in that code, these strings must start on the same 256 byte page,
; which is checked at assembly time below.
;
g_szFddStart:
g_szFddUnknown: db  "Unknown",NULL
g_szFddSizeOr:  db  "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
g_szFddSize:    db  "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
g_szFddThreeHalf:       db  "3",ONE_HALF,NULL
g_szFddEnd:
g_szFddFiveQuarter:     db  "5",ONE_QUARTER,NULL

%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
        %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives.  Please move this block up or down within strings.asm"
    %endif
%endif

; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
; To support an optimization in that code, these strings must start on the same 256 byte page,
; which is checked at assembly time below.
;
g_szDetectStart:
g_szDetectMaster:       db  "Master",NULL
g_szDetectSlave:        db  "Slave ",NULL
g_szDetectOuter:        db  "IDE %s at %s: ",NULL
;%%; %ifdef MODULE_SERIAL       ;%%; is stripped off after string compression, %ifdef won't compress properly
g_szDetectOuterSerial:  db  "Serial %s on %s: ",NULL
g_szDetectCOM:          db  "COM%c%s",NULL
g_szDetectCOMAuto:      db  " Detect",NULL
g_szDetectCOMSmall:     db  "/%u%u00",NULL                  ; IDE Master at COM1/9600:
g_szDetectCOMLarge:     db  "/%u.%uK",NULL                  ; IDE Master at COM1/19.2K:
;%%; %endif                     ;%%; is stripped off after string compression, %ifdef won't compress properly
g_szDetectEnd:
g_szDetectPort:         db  "%x",NULL                       ; IDE Master at 1F0h:

%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
        %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP.  Please move this block up or down within strings.asm"
    %endif
%endif

; Boot Menu menuitem strings
;
; The following strings are used by BootMenuPrint_* routines.
; To support optimizations in that code, these strings must start on the same 256 byte page,
; which is checked at assembly time below.
;
g_szBootMenuPrintStart:
g_szDriveNum:           db  "%x %s",NULL
g_szDriveNumBOOTNFO:    db  "%x %z",NULL
g_szFloppyDrv:          db  "Floppy Drive %c",NULL
g_szBootMenuPrintEnd:
g_szForeignHD:          db  "Foreign Hard Disk",NULL

%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
        %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines.  Please move this block up or down within strings.asm"
    %endif
%endif

; POST drive detection strings
g_szRomAt:      db  "%s @ %x",LF,CR,NULL

; Boot loader strings
g_szTryToBoot:          db  "Booting from %s %x",ANGLE_QUOTE_RIGHT,"%x",LF,CR,NULL
g_szBootSectorNotFound: db  "Boot sector "
g_szNotFound:           db  "not found",LF,CR,NULL
g_szReadError:          db  "Error %x!",LF,CR,NULL

g_szAddressingModes:
g_szLCHS:       db  "L-CHS",NULL
g_szPCHS:       db  "P-CHS",NULL
g_szLBA28:      db  "LBA28",NULL
g_szLBA48:      db  "LBA48",NULL
g_szAddressingModes_Displacement equ (g_szPCHS - g_szAddressingModes)
;
; Ensure that addressing modes are correctly spaced in memory
;
%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    %if g_szLCHS <> g_szAddressingModes
        %error "g_szAddressingModes Displacement Incorrect 1"
    %endif
    %if g_szPCHS <> g_szLCHS + g_szAddressingModes_Displacement
        %error "g_szAddressingModes Displacement Incorrect 2"
    %endif
    %if g_szLBA28 <> g_szPCHS + g_szAddressingModes_Displacement
        %error "g_szAddressingModes Displacement Incorrect 3"
    %endif
    %if g_szLBA48 <> g_szLBA28 + g_szAddressingModes_Displacement
        %error "g_szAddressingModes Displacement Incorrect 4"
    %endif
%endif

g_szBusTypeValues:
g_szBusTypeValues_8Dual:        db      "D8 ",NULL
g_szBusTypeValues_8Reversed:    db      "X8 ",NULL
g_szBusTypeValues_8Single:      db      "S8 ",NULL
g_szBusTypeValues_16:           db      " 16",NULL
g_szBusTypeValues_32:           db      " 32",NULL
g_szBusTypeValues_Serial:       db      "SER",NULL
g_szBusTypeValues_8MemMapped:   db      "M8 ",NULL
g_szBusTypeValues_Displacement equ (g_szBusTypeValues_8Reversed - g_szBusTypeValues)
;
; Ensure that bus type strings are correctly spaced in memory
;
%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
    %if g_szBusTypeValues_8Dual <> g_szBusTypeValues
        %error "g_szBusTypeValues Displacement Incorrect 1"
    %endif
    %if g_szBusTypeValues_8Reversed <> g_szBusTypeValues + g_szBusTypeValues_Displacement
        %error "g_szBusTypeValues Displacement Incorrect 2"
    %endif
    %if g_szBusTypeValues_8Single <> g_szBusTypeValues_8Reversed + g_szBusTypeValues_Displacement
        %error "g_szBusTypeValues Displacement Incorrect 3"
    %endif
    %if g_szBusTypeValues_16 <> g_szBusTypeValues_8Single + g_szBusTypeValues_Displacement
        %error "g_szBusTypeValues Displacement Incorrect 4"
    %endif
    %if g_szBusTypeValues_32 <> g_szBusTypeValues_16 + g_szBusTypeValues_Displacement
        %error "g_szBusTypeValues Displacement Incorrect 5"
    %endif
    %if g_szBusTypeValues_Serial <> g_szBusTypeValues_32 + g_szBusTypeValues_Displacement
        %error "g_szBusTypeValues Displacement Incorrect 6"
    %endif
    %if g_szBusTypeValues_8MemMapped <> g_szBusTypeValues_Serial + g_szBusTypeValues_Displacement
        %error "g_szBusTypeValues Displacement Incorrect 7"
    %endif
%endif

g_szSelectionTimeout:   db      DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL

g_szDashForZero:        db      "- ",NULL

; Boot menu bottom of screen strings
g_szFDD:        db  "FDD     ",NULL
g_szHDD:        db  "HDD     ",NULL
g_szRomBoot:    db  "ROM Boot",NULL
g_szHotkey:     db  "%A%c%c%A%s%A ",NULL

; Boot Menu information strings
g_szCapacity:           db  "Capacity : %s",NULL
g_szCapacityNum:        db  "%5-u.%u %ciB",NULL
g_szInformation:        db  "%s",LF,CR
    db  "Addr.",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL,  "IRQ",SINGLE_VERTICAL,"Reset",LF,CR
    db     "%s",SINGLE_VERTICAL, "%5-u",SINGLE_VERTICAL, "%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x" ,NULL

;------------------------------------------------------------------------------------------
;
; Tables for StringsCompress.pl
;
;$translate{ord(' ')} = 0;
;$translate{172}      = 1;     # ONE_QUARTER
;$translate{171}      = 2;     # ONE_HALF
;$translate{179}      = 3;     # SINGLE_VERTICAL
;$translate{175}      = 4;     # ANGLE_QUOTE_RIGHT
;$translate{ord('!')} = 5;
;$translate{ord('"')} = 6;
;$translate{ord(',')} = 7;
;$translate{ord('-')} = 8;
;$translate{ord('.')} = 9;
;$translate{ord('/')} = 10;
;$translate{ord('1')} = 11;
;$translate{ord('2')} = 12;
;$translate{ord('3')} = 13;
;$translate{ord('4')} = 14;
;$translate{ord('5')} = 15;
;$translate{ord('6')} = 16;
;$translate{ord('8')} = 17;
;$translate{200}      = 18;    # DOUBLE_BOTTOM_LEFT_CORNER
;$translate{181}      = 19;    # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
;$translate{ord('0')} = 20;
;
; Formats begin immediately after the last Translated character (they are in the same table)
;
;$format_begin = 21;
;
;$format{"c"}   = 21;        # n/a
;$format{"2-I"} = 22;        # must be even
;$format{"u"}   = 23;        # must be odd
;$format{"5-u"} = 24;        # must be even
;$format{"x"}   = 25;        # must be odd
;$format{"5-x"} = 26;        # must be even
;$format{"nl"}  = 27;        # n/a
;$format{"2-u"} = 28;        # must be even
;$format{"A"}   = 29;        # n/a
;$format{"s"}   = 30;        # n/a, normal string from DS
;$format{"z"}   = 31;        # n/a, boot string from BDA
;
; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
;
; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
; letters.  If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
; front end.
;
;$normal_base = 0x3a;
;
; End of StringsCompress.pl information
;
;------------------------------------------------------------------------------------------