source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Strings.asm @ 292

Last change on this file since 292 was 292, checked in by gregli@…, 12 years ago

Small optimization, moved around some serial code to avoid a few jumps and unnecessary number of sectors check.

File size: 8.3 KB
RevLine 
[88]1; Project name  :   XTIDE Universal BIOS
[3]2; Description   :   Strings and equates for BIOS messages.
3
[186]4%ifdef MODULE_STRINGS_COMPRESSED_PRECOMPRESS
[242]5    %include "Display.inc"
[186]6%endif
7
[3]8; Section containing code
9SECTION .text
10
[292]11; Boot Menu Floppy Disk strings
12;
13; The following strings are used by BootMenuPrint_RefreshInformation
14; To support optimizations in that code, these strings must start on the same 256 byte page,
15; which is checked at assembly time below.
16;
17g_szFddStart:
18g_szFddUnknown: db  "Unknown",NULL
19g_szFddSizeOr:  db  "5",ONE_QUARTER,QUOTATION_MARK," or 3",ONE_HALF,QUOTATION_MARK," DD",NULL
20g_szFddSize:    db  "%s",QUOTATION_MARK,", %u kiB",NULL ; 3½", 1440 kiB
21g_szFddThreeHalf:       db  "3",ONE_HALF,NULL
22g_szFddEnd:
23g_szFddFiveQuarter:     db  "5",ONE_QUARTER,NULL
24
25%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
26    %if ((g_szFddStart-$$) & 0xff00) <> ((g_szFddEnd-$$) & 0xff00)
27        %error "g_szFdd* strings must start on the same 256 byte page, required by the BootMenuPrint_RefreshInformation routines for floppy drives.  Please move this block up or down within strings.asm"
28    %endif
29%endif
30
31; The following strings are used by DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
32; To support an optimization in that code, these strings must start on the same 256 byte page,
33; which is checked at assembly time below.
34;
35g_szDetectStart:
36g_szDetectMaster:       db  "Master",NULL
37g_szDetectSlave:        db  "Slave ",NULL
38g_szDetectOuter:        db  "IDE %s at %s: ",NULL
39;%%; %ifdef MODULE_SERIAL       ;%%; is stripped off after string compression, %ifdef won't compress properly
40g_szDetectOuterSerial:  db  "Serial %s on %s: ",NULL
41g_szDetectCOM:          db  "COM%c%s",NULL
42g_szDetectCOMAuto:      db  " Detect",NULL
43g_szDetectCOMSmall:     db  "/%u%u00",NULL                  ; IDE Master at COM1/9600:
44g_szDetectCOMLarge:     db  "/%u.%uK",NULL                  ; IDE Master at COM1/19.2K:
45;%%; %endif                     ;%%; is stripped off after string compression, %ifdef won't compress properly
46g_szDetectEnd:
47g_szDetectPort:         db  "%x",NULL                       ; IDE Master at 1F0h:
48
49%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
50    %if ((g_szDetectEnd-$$) & 0xff00) <> ((g_szDetectStart-$$) & 0xff00)
51        %error "g_szDetect* strings must start on the same 256 byte page, required by DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP.  Please move this block up or down within strings.asm"
52    %endif
53%endif
54
55; Boot Menu menuitem strings
56;
57; The following strings are used by BootMenuPrint_* routines.
58; To support optimizations in that code, these strings must start on the same 256 byte page,
59; which is checked at assembly time below.
60;
61g_szBootMenuPrintStart:
62g_szDriveNum:           db  "%x %s",NULL
63g_szDriveNumBOOTNFO:    db  "%x %z",NULL
64g_szFloppyDrv:          db  "Floppy Drive %c",NULL
65g_szBootMenuPrintEnd:
66g_szForeignHD:          db  "Foreign Hard Disk",NULL
67
68%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
69    %if ((g_szBootMenuPrintStart-$$) & 0xff00) <> ((g_szBootMenuPrintEnd-$$) & 0xff00)
70        %error "g_szBootMenuPrint* strings must start on the same 256 byte page, required by the BootMenuPrint_* routines.  Please move this block up or down within strings.asm"
71    %endif
72%endif
73
[241]74; POST drive detection strings
75g_szRomAt:      db  "%s @ %x",LF,CR,NULL
[242]76
[3]77; Boot loader strings
[143]78g_szTryToBoot:          db  "Booting from %s %x",ANGLE_QUOTE_RIGHT,"%x",LF,CR,NULL
79g_szBootSectorNotFound: db  "Boot sector "
80g_szNotFound:           db  "not found",LF,CR,NULL
81g_szReadError:          db  "Error %x!",LF,CR,NULL
[3]82
[242]83g_szAddressingModes:
[88]84g_szLCHS:       db  "L-CHS",NULL
85g_szPCHS:       db  "P-CHS",NULL
86g_szLBA28:      db  "LBA28",NULL
87g_szLBA48:      db  "LBA48",NULL
[185]88g_szAddressingModes_Displacement equ (g_szPCHS - g_szAddressingModes)
89;
90; Ensure that addressing modes are correctly spaced in memory
91;
[242]92%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
93    %if g_szLCHS <> g_szAddressingModes
94        %error "g_szAddressingModes Displacement Incorrect 1"
95    %endif
96    %if g_szPCHS <> g_szLCHS + g_szAddressingModes_Displacement
97        %error "g_szAddressingModes Displacement Incorrect 2"
98    %endif
99    %if g_szLBA28 <> g_szPCHS + g_szAddressingModes_Displacement
100        %error "g_szAddressingModes Displacement Incorrect 3"
101    %endif
102    %if g_szLBA48 <> g_szLBA28 + g_szAddressingModes_Displacement
103        %error "g_szAddressingModes Displacement Incorrect 4"
104    %endif
[185]105%endif
[242]106
107g_szBusTypeValues:
[182]108g_szBusTypeValues_8Dual:        db      "D8 ",NULL
109g_szBusTypeValues_8Reversed:    db      "X8 ",NULL
110g_szBusTypeValues_8Single:      db      "S8 ",NULL
111g_szBusTypeValues_16:           db      " 16",NULL
112g_szBusTypeValues_32:           db      " 32",NULL
113g_szBusTypeValues_Serial:       db      "SER",NULL
[285]114g_szBusTypeValues_8MemMapped:   db      "M8 ",NULL
[185]115g_szBusTypeValues_Displacement equ (g_szBusTypeValues_8Reversed - g_szBusTypeValues)
116;
117; Ensure that bus type strings are correctly spaced in memory
118;
[242]119%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
120    %if g_szBusTypeValues_8Dual <> g_szBusTypeValues
121        %error "g_szBusTypeValues Displacement Incorrect 1"
122    %endif
123    %if g_szBusTypeValues_8Reversed <> g_szBusTypeValues + g_szBusTypeValues_Displacement
124        %error "g_szBusTypeValues Displacement Incorrect 2"
125    %endif
126    %if g_szBusTypeValues_8Single <> g_szBusTypeValues_8Reversed + g_szBusTypeValues_Displacement
127        %error "g_szBusTypeValues Displacement Incorrect 3"
128    %endif
129    %if g_szBusTypeValues_16 <> g_szBusTypeValues_8Single + g_szBusTypeValues_Displacement
130        %error "g_szBusTypeValues Displacement Incorrect 4"
131    %endif
132    %if g_szBusTypeValues_32 <> g_szBusTypeValues_16 + g_szBusTypeValues_Displacement
133        %error "g_szBusTypeValues Displacement Incorrect 5"
134    %endif
135    %if g_szBusTypeValues_Serial <> g_szBusTypeValues_32 + g_szBusTypeValues_Displacement
136        %error "g_szBusTypeValues Displacement Incorrect 6"
137    %endif
[285]138    %if g_szBusTypeValues_8MemMapped <> g_szBusTypeValues_Serial + g_szBusTypeValues_Displacement
139        %error "g_szBusTypeValues Displacement Incorrect 7"
140    %endif
[185]141%endif
[242]142
[186]143g_szSelectionTimeout:   db      DOUBLE_BOTTOM_LEFT_CORNER,DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL,"%ASelection in %2-u s",NULL
[182]144
[184]145g_szDashForZero:        db      "- ",NULL
[197]146
[277]147; Boot menu bottom of screen strings
148g_szFDD:        db  "FDD     ",NULL
149g_szHDD:        db  "HDD     ",NULL
150g_szRomBoot:    db  "ROM Boot",NULL
151g_szHotkey:     db  "%A%c%c%A%s%A ",NULL
152
153; Boot Menu information strings
154g_szCapacity:           db  "Capacity : %s",NULL
155g_szCapacityNum:        db  "%5-u.%u %ciB",NULL
156g_szInformation:        db  "%s",LF,CR
157    db  "Addr.",SINGLE_VERTICAL,"Block",SINGLE_VERTICAL,"Bus",SINGLE_VERTICAL,  "IRQ",SINGLE_VERTICAL,"Reset",LF,CR
158    db     "%s",SINGLE_VERTICAL, "%5-u",SINGLE_VERTICAL, "%s",SINGLE_VERTICAL," %2-I",SINGLE_VERTICAL,"%5-x" ,NULL
159
[197]160;------------------------------------------------------------------------------------------
[242]161;
[197]162; Tables for StringsCompress.pl
163;
164;$translate{ord(' ')} = 0;
165;$translate{172}      = 1;     # ONE_QUARTER
166;$translate{171}      = 2;     # ONE_HALF
167;$translate{179}      = 3;     # SINGLE_VERTICAL
168;$translate{175}      = 4;     # ANGLE_QUOTE_RIGHT
169;$translate{ord('!')} = 5;
170;$translate{ord('"')} = 6;
171;$translate{ord(',')} = 7;
172;$translate{ord('-')} = 8;
173;$translate{ord('.')} = 9;
174;$translate{ord('/')} = 10;
[242]175;$translate{ord('1')} = 11;
[197]176;$translate{ord('2')} = 12;
177;$translate{ord('3')} = 13;
178;$translate{ord('4')} = 14;
179;$translate{ord('5')} = 15;
180;$translate{ord('6')} = 16;
181;$translate{ord('8')} = 17;
182;$translate{200}      = 18;    # DOUBLE_BOTTOM_LEFT_CORNER
183;$translate{181}      = 19;    # DOUBLE_LEFT_HORIZONTAL_TO_SINGLE_VERTICAL
[241]184;$translate{ord('0')} = 20;
[197]185;
186; Formats begin immediately after the last Translated character (they are in the same table)
187;
[233]188;$format_begin = 21;
[197]189;
190;$format{"c"}   = 21;        # n/a
191;$format{"2-I"} = 22;        # must be even
192;$format{"u"}   = 23;        # must be odd
193;$format{"5-u"} = 24;        # must be even
194;$format{"x"}   = 25;        # must be odd
195;$format{"5-x"} = 26;        # must be even
196;$format{"nl"}  = 27;        # n/a
197;$format{"2-u"} = 28;        # must be even
198;$format{"A"}   = 29;        # n/a
[241]199;$format{"s"}   = 30;        # n/a, normal string from DS
200;$format{"z"}   = 31;        # n/a, boot string from BDA
[197]201;
202; NOTE: The last $format cannot exceed 31 (stored in a 5-bit quantity).
203;
204; Starting point for the "normal" range, typically around 0x40 to cover upper and lower case
[242]205; letters.  If lower case 'z' is not used, 0x3a can be a good choice as it adds ':' to the
[197]206; front end.
207;
208;$normal_base = 0x3a;
209;
210; End of StringsCompress.pl information
211;
212;------------------------------------------------------------------------------------------
213
214
Note: See TracBrowser for help on using the repository browser.