source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Menus/BootMenu/BootMenuPrintCfg.asm @ 399

Last change on this file since 399 was 399, checked in by krille_n_@…, 12 years ago

Changes:

  • Added Power Management (Standby Timer) support to the BIOS and made it part of an optional module (MODULE_FEATURE_SETS). The total amount of ROM space used by this feature is 37 bytes. UNTESTED
  • Size optimizations (mostly inlining of procedures) and fixed a few bugs in AH9h_HInit.asm:
    1. DPT_ATA.bInitError would be cleared only if MODULE_SERIAL was not defined.
    2. The FLG_INITERROR_FAILED_TO_SET_BLOCK_MODE flag could never be set.
    3. InitializeBlockMode could potentially loop forever if there was an error.
  • Removed some odd looking code in .PushResetStatus in BootMenuPrintCfg.asm
  • Made some changes to XTIDECFG so it can be built.
File size: 4.1 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for printing drive configuration
3;                   information on Boot Menu.
4;
5; Included by BootMenuPrint.asm, this routine is to be inserted into
6; BootMenuPrint_HardDiskRefreshInformation.
7;
8
9;
10; XTIDE Universal BIOS and Associated Tools
11; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
12;
13; This program is free software; you can redistribute it and/or modify
14; it under the terms of the GNU General Public License as published by
15; the Free Software Foundation; either version 2 of the License, or
16; (at your option) any later version.
17;
18; This program is distributed in the hope that it will be useful,
19; but WITHOUT ANY WARRANTY; without even the implied warranty of
20; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
21; GNU General Public License for more details.
22; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
23;
24
25; Section containing code
26SECTION .text
27
28;;; fall-into from BootMenuPrint_HardDiskRefreshInformation.
29
30;--------------------------------------------------------------------
31; Prints Hard Disk configuration for drive handled by our BIOS.
32; Cursor is set to configuration header string position.
33;
34; BootMenuPrintCfg_ForOurDrive
35;   Parameters:
36;       DS:DI:      Pointer to DPT
37;   Returns:
38;       Nothing
39;   Corrupts registers:
40;       AX, BX, CX, DX
41;--------------------------------------------------------------------
42.BootMenuPrintCfg_ForOurDrive:
43    eMOVZX  ax, [di+DPT.bIdevarsOffset]
44    xchg    bx, ax                      ; CS:BX now points to IDEVARS
45    ; Fall to .PushAndFormatCfgString
46
47;--------------------------------------------------------------------
48; PushAddressingMode
49;   Parameters:
50;       DS:DI:  Ptr to DPT
51;       CS:BX:  Ptr to IDEVARS
52;   Returns:
53;       Nothing (jumps to next push below)
54;   Corrupts registers:
55;       AX, CX
56;--------------------------------------------------------------------
57.PushAddressingMode:
58    AccessDPT_GetUnshiftedAddressModeToALZF
59    ;;
60    ;; This multiply both shifts the addressing mode bits down to low order bits, and
61    ;; at the same time multiplies by the size of the string displacement.  The result is in AH,
62    ;; with AL clear, and so we exchange AL and AH after the multiply for the final result.
63    ;;
64    mov     cl,(1<<(8-ADDRESSING_MODE_FIELD_POSITION)) * g_szAddressingModes_Displacement
65    mul     cl
66    xchg    al,ah
67    add     ax,g_szAddressingModes
68    push    ax
69
70;--------------------------------------------------------------------
71; PushBlockMode
72;   Parameters:
73;       DS:DI:  Ptr to DPT
74;       CS:BX:  Ptr to IDEVARS
75;   Returns:
76;       Nothing (falls to next push below)
77;   Corrupts registers:
78;       AX
79;--------------------------------------------------------------------
80.PushBlockMode:
81    mov     ax, 1
82    test    BYTE [di+DPT.bFlagsHigh], FLGH_DPT_BLOCK_MODE_SUPPORTED
83    jz      SHORT .PushBlockSizeFromAX
84    mov     al, [di+DPT_ATA.bBlockSize]
85.PushBlockSizeFromAX:
86    push    ax
87
88;--------------------------------------------------------------------
89; PushBusType
90;   Parameters:
91;       DS:DI:  Ptr to DPT
92;       CS:BX:  Ptr to IDEVARS
93;   Returns:
94;       Nothing (jumps to next push below)
95;   Corrupts registers:
96;       AX, DX
97;--------------------------------------------------------------------
98.PushBusType:
99    mov     al,g_szBusTypeValues_Displacement
100    mul     BYTE [cs:bx+IDEVARS.bDevice]
101
102    shr     ax,1            ; divide by 2 since IDEVARS.bDevice is multiplied by 2
103
104    add     ax,g_szBusTypeValues
105    push    ax
106
107;--------------------------------------------------------------------
108; PushIRQ
109;   Parameters:
110;       DS:DI:  Ptr to DPT
111;       CS:BX:  Ptr to IDEVARS
112;   Returns:
113;       Nothing (falls to next push below)
114;   Corrupts registers:
115;       AX, DX
116;--------------------------------------------------------------------
117.PushIRQ:
118    mov     al, [cs:bx+IDEVARS.bIRQ]
119    cbw
120    push    ax
121
122;--------------------------------------------------------------------
123; PushResetStatus
124;   Parameters:
125;       DS:DI:  Ptr to DPT
126;       CS:BX:  Ptr to IDEVARS
127;   Returns:
128;       Nothing (falls to next push below)
129;   Corrupts registers:
130;       AX, BX, DX, ES
131;--------------------------------------------------------------------
132.PushResetStatus:
133    mov     al, [di+DPT_ATA.bInitError]
134    push    ax
135
136;;; fall-out to BootMenuPrint_HardDiskRefreshInformation.
Note: See TracBrowser for help on using the repository browser.