source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Main.asm@ 366

Last change on this file since 366 was 363, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Added Advanced ATA Module (MODULE_ADVANCED_ATA) with native support for QDI Vision QD6500 and QD6580 VLB IDE Controllers.
  • Hopefully optimized IDE transfer functions for 8088 (replaced some memory accesses from WORD to BYTE).
  • XT build does not fit in 8k at the moment!!!
File size: 12.0 KB
RevLine 
[3]1; Project name : XTIDE Universal BIOS
[86]2; Authors : Tomi Tilli
3; : aitotat@gmail.com
4; :
[181]5; : Greg Lindhorst
6; : gregli@hotmail.com
7; ;
[86]8; : Krister Nordvall
9; : krille_n_@hotmail.com
10; :
[3]11; Description : Main file for BIOS. This is the only file that needs
12; to be compiled since other files are included to this
13; file (so no linker needed, Nasm does it all).
14
[294]15 ORG 0 ; Code start offset 0000h
[3]16
[183]17%define MENUEVENT_INLINE_OFFSETS ; Only one menu required, save space and inline offsets
[277]18
[181]19 ; Included .inc files
20 %include "AssemblyLibrary.inc" ; Assembly Library. Must be included first!
[358]21 %include "Version.inc"
[181]22 %include "IntController.inc" ; For Interrupt Controller equates
23 %include "ATA_ID.inc" ; For ATA Drive Information structs
24 %include "IdeRegisters.inc" ; For ATA Registers, flags and commands
25 %include "Int13h.inc" ; Equates for INT 13h functions
[176]26%ifdef MODULE_EBIOS
[181]27 %include "EBIOS.inc" ; Equates for EBIOS functions
[176]28%endif
[181]29 %include "CustomDPT.inc" ; For Disk Parameter Table
30 %include "RomVars.inc" ; For ROMVARS and IDEVARS structs
31 %include "RamVars.inc" ; For RAMVARS struct
[254]32 %include "BootVars.inc" ; For BOOTVARS struct
[181]33 %include "BootMenu.inc" ; For Boot Menu
34 %include "IDE_8bit.inc" ; For IDE 8-bit data port macros
35 %include "DeviceIDE.inc" ; For IDE device equates
[363]36 %include "Vision.inc" ; For QDI Vision QD65xx VLB IDE Controllers
[3]37
38
39; Section containing code
40SECTION .text
41
42; ROM variables (must start at offset 0)
[239]43CNT_ROM_BLOCKS EQU ROMSIZE / 512 ; number of 512B blocks, 16 = 8kB BIOS
[3]44istruc ROMVARS
45 at ROMVARS.wRomSign, dw 0AA55h ; PC ROM signature
46 at ROMVARS.bRomSize, db CNT_ROM_BLOCKS ; ROM size in 512B blocks
[181]47 at ROMVARS.rgbJump, jmp Initialize_FromMainBiosRomSearch
[358]48 at ROMVARS.rgbSign, db FLASH_SIGNATURE
49 at ROMVARS.szTitle, db TITLE_STRING
50 at ROMVARS.szVersion, db ROM_VERSION_STRING
[3]51
[179]52;;; For OR'ing into wFlags below
[181]53;;;
[179]54%ifdef MODULE_SERIAL
[181]55 MAIN_FLG_MODULE_SERIAL equ FLG_ROMVARS_MODULE_SERIAL
[179]56%else
[181]57 MAIN_FLG_MODULE_SERIAL equ 0
[179]58%endif
59
60%ifdef MODULE_EBIOS
[181]61 MAIN_FLG_MODULE_EBIOS equ FLG_ROMVARS_MODULE_EBIOS
[179]62%else
[181]63 MAIN_FLG_MODULE_EBIOS equ 0
[179]64%endif
65
[243]66%ifdef MODULE_JRIDE
67 MAIN_FLG_MODULE_JRIDE equ FLG_ROMVARS_MODULE_JRIDE
68%else
69 MAIN_FLG_MODULE_JRIDE equ 0
70%endif
71
[363]72%ifdef MODULE_ADVANCED_ATA
73 MAIN_FLG_MODULE_ADVATA equ FLG_ROMVARS_MODULE_ADVATA
74%else
75 MAIN_FLG_MODULE_ADVATA equ 0
76%endif
[243]77
[363]78
[3]79;---------------------------;
80; AT Build default settings ;
81;---------------------------;
82%ifdef USE_AT
[363]83 at ROMVARS.wFlags, dw FLG_ROMVARS_FULLMODE | FLG_ROMVARS_DRVXLAT | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_EBIOS | MAIN_FLG_MODULE_JRIDE | MAIN_FLG_MODULE_ADVATA
[143]84 at ROMVARS.wDisplayMode, dw DEFAULT_TEXT_MODE
[291]85 at ROMVARS.wBootTimeout, dw BOOT_MENU_DEFAULT_TIMEOUT
[150]86 at ROMVARS.bIdeCnt, db 4 ; Number of supported controllers
[3]87 at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
88 at ROMVARS.bMinFddCnt, db 0 ; Do not force minimum number of floppy drives
89 at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory
90
[199]91 at ROMVARS.ideVars0+IDEVARS.wPort, dw DEVICE_ATA_DEFAULT_PORT ; Controller Command Block base port
92 at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw DEVICE_ATA_DEFAULT_PORTCTRL ; Controller Control Block base port
[150]93 at ROMVARS.ideVars0+IDEVARS.bDevice, db DEVICE_16BIT_ATA
[160]94 at ROMVARS.ideVars0+IDEVARS.bIRQ, db 0
[276]95 at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
96 at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[3]97
[363]98 at ROMVARS.ideVars1+IDEVARS.wPort, dw DEVICE_ATA_DEFAULT_SECONDARY_PORT
99 at ROMVARS.ideVars1+IDEVARS.wPortCtrl, dw DEVICE_ATA_DEFAULT_SECONDARY_PORTCTRL
[150]100 at ROMVARS.ideVars1+IDEVARS.bDevice, db DEVICE_16BIT_ATA
[160]101 at ROMVARS.ideVars1+IDEVARS.bIRQ, db 0
[276]102 at ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
103 at ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[3]104
[199]105 at ROMVARS.ideVars2+IDEVARS.wPort, dw DEVICE_XTIDE_DEFAULT_PORT ; Controller Command Block base port
106 at ROMVARS.ideVars2+IDEVARS.wPortCtrl, dw DEVICE_XTIDE_DEFAULT_PORTCTRL ; Controller Control Block base port
[361]107 at ROMVARS.ideVars2+IDEVARS.bDevice, db DEVICE_XTIDE_REV1
[150]108 at ROMVARS.ideVars2+IDEVARS.bIRQ, db 0
[276]109 at ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
110 at ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[143]111
112 at ROMVARS.ideVars3+IDEVARS.wPort, dw 168h ; Controller Command Block base port
113 at ROMVARS.ideVars3+IDEVARS.wPortCtrl, dw 368h ; Controller Control Block base port
[150]114 at ROMVARS.ideVars3+IDEVARS.bDevice, db DEVICE_16BIT_ATA
115 at ROMVARS.ideVars3+IDEVARS.bIRQ, db 0
[276]116 at ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
117 at ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[175]118
119%ifdef MODULE_SERIAL
120 at ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice, db DEVICE_SERIAL_PORT
[181]121%endif
[3]122%else
123;-----------------------------------;
124; XT and XT+ Build default settings ;
125;-----------------------------------;
[363]126 at ROMVARS.wFlags, dw FLG_ROMVARS_DRVXLAT | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_EBIOS | MAIN_FLG_MODULE_JRIDE | MAIN_FLG_MODULE_ADVATA
[143]127 at ROMVARS.wDisplayMode, dw DEFAULT_TEXT_MODE
[291]128 at ROMVARS.wBootTimeout, dw BOOT_MENU_DEFAULT_TIMEOUT
[3]129 at ROMVARS.bIdeCnt, db 1 ; Number of supported controllers
130 at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
131 at ROMVARS.bMinFddCnt, db 1 ; Assume at least 1 floppy drive present if autodetect fails
132 at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory in full mode
133
[285]134 at ROMVARS.ideVars0+IDEVARS.wPort, dw DEVICE_XTIDE_DEFAULT_PORT ; Controller Command Block base port
135 at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw DEVICE_XTIDE_DEFAULT_PORTCTRL ; Controller Control Block base port
[273]136%ifdef MODULE_JRIDE
137 at ROMVARS.ideVars0+IDEVARS.bDevice, db DEVICE_JRIDE_ISA
138%else
[361]139 at ROMVARS.ideVars0+IDEVARS.bDevice, db DEVICE_XTIDE_REV1
[273]140%endif
[3]141 at ROMVARS.ideVars0+IDEVARS.bIRQ, db 0 ; IRQ
[276]142 at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
143 at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[143]144
[276]145 at ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
146 at ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[143]147
[276]148 at ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
149 at ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[143]150
[276]151 at ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
152 at ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db DISABLE_WRITE_CACHE | FLG_DRVPARAMS_BLOCKMODE
[175]153
154%ifdef MODULE_SERIAL
155 at ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice, db DEVICE_SERIAL_PORT
[3]156%endif
[181]157%endif
[3]158iend
159
[334]160 ; Strings are first to avoid them moving unnessarily when code is turned on and off with %ifdef's
161 ; since some groups of strings need to be on the same 256-byte page.
162 ;
163%ifdef MODULE_STRINGS_COMPRESSED
164 %define STRINGSCOMPRESSED_STRINGS
165 %include "StringsCompressed.asm"
166%else
167 %include "Strings.asm" ; For BIOS message strings
168%endif
169
[248]170 ; Libraries, data, Initialization and drive detection
[334]171
[181]172 %include "AssemblyLibrary.asm"
[334]173
174 ; String compression tables need to come after the AssemblyLibrary (since they depend on addresses
175 ; established in the assembly library), and are unncessary if strings are not compressed.
176 ;
177%ifdef MODULE_STRINGS_COMPRESSED
178 %undef STRINGSCOMPRESSED_STRINGS
179 %define STRINGSCOMPRESSED_TABLES
180 %include "StringsCompressed.asm"
181%endif
182
[248]183 %include "Initialize.asm" ; For BIOS initialization
184 %include "Interrupts.asm" ; For Interrupt initialization
185 %include "RamVars.asm" ; For RAMVARS initialization and access
[285]186 %include "CreateDPT.asm" ; For creating DPTs
187 %include "FindDPT.asm" ; For finding DPTs
[181]188 %include "AccessDPT.asm" ; For accessing DPTs
[358]189 %include "LbaAssist.asm" ; For generating L-CHS parameters to LBA drives
[254]190 %include "BootMenuInfo.asm" ; For creating BOOTMENUINFO structs
[181]191 %include "AtaID.asm" ; For ATA Identify Device information
192 %include "DetectDrives.asm" ; For detecting IDE drives
193 %include "DetectPrint.asm" ; For printing drive detection strings
[248]194
[181]195 ; Boot menu
196 %include "BootMenu.asm" ; For Boot Menu operations
197 %include "BootMenuEvent.asm" ; For menu library event handling
[192]198 ; NOTE: BootMenuPrint needs to come immediately after BootMenuEvent
[258]199 ; so that jump table entries in BootMenuEvent stay within 8-bits
200 %include "BootMenuPrint.asm" ; For printing Boot Menu strings, also includes "BootMenuPrintCfg.asm"
[192]201 %include "BootPrint.asm" ; For printing boot information
[181]202 %include "FloppyDrive.asm" ; Floppy Drive related functions
203 %include "BootSector.asm" ; For loading boot sector
[3]204
[181]205 ; Boot loader
[243]206 %include "Int19h.asm" ; For Int 19h, Boot Loader
[3]207
[181]208 ; For all device types
[192]209 %include "Idepack.asm"
[181]210 %include "Device.asm"
211 %include "Timer.asm" ; For timeout and delay
[155]212
[181]213 ; IDE Device support
[363]214%ifdef MODULE_ADVANCED_ATA
215 %include "AdvAtaInit.asm" ; For initializing VLB and PCI controllers
216 %include "Vision.asm" ; QDI Vision QD6500 and QD6580 support
217%endif
[238]218%define IDEDEVICE Ide
219%define ASSEMBLE_SHARED_IDE_DEVICE_FUNCTIONS
220 %include "IOMappedIDE.inc" ; Assembly IDE support for normal I/O mapped controllers
[181]221 %include "IdeCommand.asm"
222 %include "IdeTransfer.asm" ; Must be included after IdeCommand.asm
[192]223 %include "IdeWait.asm"
[294]224 %include "IdeError.asm" ; Must be included after IdeWait.asm
[181]225 %include "IdeDPT.asm"
226 %include "IdeIO.asm"
227 %include "IdeIrq.asm"
[238]228%undef IDEDEVICE
229%undef ASSEMBLE_SHARED_IDE_DEVICE_FUNCTIONS
[155]230
[238]231 ; JR-IDE support
232%ifdef MODULE_JRIDE
233%define IDEDEVICE MemIde
234 %include "MemMappedIDE.inc" ; Assembly IDE support for memory mapped controllers
235 %include "IdeCommand.asm"
236 %include "MemIdeTransfer.asm" ; Must be included after IdeCommand.asm
237 %include "IdeWait.asm"
[294]238 %include "IdeError.asm" ; Must be included after IdeWait.asm
[238]239%undef IDEDEVICE
240%endif
241
242
[181]243%ifdef MODULE_SERIAL ; Serial Port Device support
244 %include "SerialCommand.asm"
245 %include "SerialDPT.asm"
[175]246%endif
[155]247
[181]248 ; INT 13h Hard Disk BIOS functions
249 %include "Int13h.asm" ; For Int 13h, Disk functions
250 %include "AH0h_HReset.asm" ; Required by Int13h_Jump.asm
251 %include "AH1h_HStatus.asm" ; Required by Int13h_Jump.asm
252 %include "AH2h_HRead.asm" ; Required by Int13h_Jump.asm
253 %include "AH3h_HWrite.asm" ; Required by Int13h_Jump.asm
254 %include "AH4h_HVerify.asm" ; Required by Int13h_Jump.asm
255 %include "AH8h_HParams.asm" ; Required by Int13h_Jump.asm
256 %include "AH9h_HInit.asm" ; Required by Int13h_Jump.asm
257 %include "AHCh_HSeek.asm" ; Required by Int13h_Jump.asm
258 %include "AHDh_HReset.asm" ; Required by Int13h_Jump.asm
259 %include "AH10h_HReady.asm" ; Required by Int13h_Jump.asm
260 %include "AH11h_HRecal.asm" ; Required by Int13h_Jump.asm
261 %include "AH15h_HSize.asm" ; Required by Int13h_Jump.asm
262 %include "AH23h_HFeatures.asm" ; Required by Int13h_Jump.asm
263 %include "AH24h_HSetBlocks.asm" ; Required by Int13h_Jump.asm
264 %include "AH25h_HDrvID.asm" ; Required by Int13h_Jump.asm
[221]265 %include "DriveXlate.asm" ; For swapping drive numbers
266 %include "Address.asm" ; For sector address translations
267 %include "Prepare.asm" ; For buffer pointer normalization
[176]268%ifdef MODULE_EBIOS
[181]269 %include "AH42h_ExtendedReadSectors.asm"
270 %include "AH43h_ExtendedWriteSectors.asm"
271 %include "AH44h_ExtendedVerifySectors.asm"
272 %include "AH47h_ExtendedSeek.asm"
273 %include "AH48h_GetExtendedDriveParameters.asm"
[221]274 %include "AH41h_CheckIfExtensionsPresent.asm"
[176]275%endif
Note: See TracBrowser for help on using the repository browser.