source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Main.asm@ 240

Last change on this file since 240 was 239, checked in by gregli@…, 13 years ago

Passing ROMSIZE into main.asm to calculate number of 512B blocks for option ROM header, added checksum calculations for large images.

File size: 10.7 KB
RevLine 
[3]1; Project name : XTIDE Universal BIOS
[86]2; Authors : Tomi Tilli
3; : aitotat@gmail.com
4; :
[181]5; : Greg Lindhorst
6; : gregli@hotmail.com
7; ;
[86]8; : Krister Nordvall
9; : krille_n_@hotmail.com
10; :
[3]11; Description : Main file for BIOS. This is the only file that needs
12; to be compiled since other files are included to this
13; file (so no linker needed, Nasm does it all).
14
15ORG 000h ; Code start offset 0000h
16
[183]17%define MENUEVENT_INLINE_OFFSETS ; Only one menu required, save space and inline offsets
18
[181]19 ; Included .inc files
20 %include "AssemblyLibrary.inc" ; Assembly Library. Must be included first!
21 %include "IntController.inc" ; For Interrupt Controller equates
22 %include "ATA_ID.inc" ; For ATA Drive Information structs
23 %include "IdeRegisters.inc" ; For ATA Registers, flags and commands
24 %include "Int13h.inc" ; Equates for INT 13h functions
[176]25%ifdef MODULE_EBIOS
[181]26 %include "EBIOS.inc" ; Equates for EBIOS functions
[176]27%endif
[181]28 %include "CustomDPT.inc" ; For Disk Parameter Table
29 %include "RomVars.inc" ; For ROMVARS and IDEVARS structs
30 %include "RamVars.inc" ; For RAMVARS struct
31 %include "BootVars.inc" ; For BOOTVARS and BOOTNFO structs
32 %include "BootMenu.inc" ; For Boot Menu
33 %include "IDE_8bit.inc" ; For IDE 8-bit data port macros
34 %include "DeviceIDE.inc" ; For IDE device equates
[3]35
36
37; Section containing code
38SECTION .text
39
40; ROM variables (must start at offset 0)
[239]41CNT_ROM_BLOCKS EQU ROMSIZE / 512 ; number of 512B blocks, 16 = 8kB BIOS
[3]42istruc ROMVARS
43 at ROMVARS.wRomSign, dw 0AA55h ; PC ROM signature
44 at ROMVARS.bRomSize, db CNT_ROM_BLOCKS ; ROM size in 512B blocks
[181]45 at ROMVARS.rgbJump, jmp Initialize_FromMainBiosRomSearch
[88]46 at ROMVARS.rgbSign, db "XTIDE120" ; Signature for flash program
[3]47 at ROMVARS.szTitle
48 db "-=XTIDE Universal BIOS"
49%ifdef USE_AT
[88]50 db " (AT)=-",NULL
[3]51%elifdef USE_186
[88]52 db " (XT+)=-",NULL
[3]53%else
[88]54 db " (XT)=-",NULL
[3]55%endif
[97]56 at ROMVARS.szVersion, db "v1.2.0_wip (",__DATE__,")",NULL
[3]57
[179]58;;; For OR'ing into wFlags below
[181]59;;;
[179]60%ifdef MODULE_SERIAL
[181]61 MAIN_FLG_MODULE_SERIAL equ FLG_ROMVARS_MODULE_SERIAL
[179]62%else
[181]63 MAIN_FLG_MODULE_SERIAL equ 0
[179]64%endif
65
66%ifdef MODULE_EBIOS
[181]67 MAIN_FLG_MODULE_EBIOS equ FLG_ROMVARS_MODULE_EBIOS
[179]68%else
[181]69 MAIN_FLG_MODULE_EBIOS equ 0
[179]70%endif
71
[3]72;---------------------------;
73; AT Build default settings ;
74;---------------------------;
75%ifdef USE_AT
[179]76 at ROMVARS.wFlags, dw FLG_ROMVARS_FULLMODE | FLG_ROMVARS_DRVXLAT | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_EBIOS
[143]77 at ROMVARS.wDisplayMode, dw DEFAULT_TEXT_MODE
[137]78 at ROMVARS.wBootTimeout, dw 30 * TICKS_PER_SECOND ; Boot Menu selection timeout
[150]79 at ROMVARS.bIdeCnt, db 4 ; Number of supported controllers
[3]80 at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
81 at ROMVARS.bMinFddCnt, db 0 ; Do not force minimum number of floppy drives
82 at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory
83
[199]84 at ROMVARS.ideVars0+IDEVARS.wPort, dw DEVICE_ATA_DEFAULT_PORT ; Controller Command Block base port
85 at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw DEVICE_ATA_DEFAULT_PORTCTRL ; Controller Control Block base port
[150]86 at ROMVARS.ideVars0+IDEVARS.bDevice, db DEVICE_16BIT_ATA
[160]87 at ROMVARS.ideVars0+IDEVARS.bIRQ, db 0
[3]88 at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
89 at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
90
91 at ROMVARS.ideVars1+IDEVARS.wPort, dw 170h ; Controller Command Block base port
92 at ROMVARS.ideVars1+IDEVARS.wPortCtrl, dw 370h ; Controller Control Block base port
[150]93 at ROMVARS.ideVars1+IDEVARS.bDevice, db DEVICE_16BIT_ATA
[160]94 at ROMVARS.ideVars1+IDEVARS.bIRQ, db 0
[3]95 at ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
96 at ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
97
[199]98 at ROMVARS.ideVars2+IDEVARS.wPort, dw DEVICE_XTIDE_DEFAULT_PORT ; Controller Command Block base port
99 at ROMVARS.ideVars2+IDEVARS.wPortCtrl, dw DEVICE_XTIDE_DEFAULT_PORTCTRL ; Controller Control Block base port
[150]100 at ROMVARS.ideVars2+IDEVARS.bDevice, db DEVICE_8BIT_DUAL_PORT_XTIDE
101 at ROMVARS.ideVars2+IDEVARS.bIRQ, db 0
[3]102 at ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
103 at ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[143]104
105 at ROMVARS.ideVars3+IDEVARS.wPort, dw 168h ; Controller Command Block base port
106 at ROMVARS.ideVars3+IDEVARS.wPortCtrl, dw 368h ; Controller Control Block base port
[150]107 at ROMVARS.ideVars3+IDEVARS.bDevice, db DEVICE_16BIT_ATA
108 at ROMVARS.ideVars3+IDEVARS.bIRQ, db 0
[143]109 at ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
110 at ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[175]111
112%ifdef MODULE_SERIAL
113 at ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice, db DEVICE_SERIAL_PORT
[181]114%endif
[3]115%else
116;-----------------------------------;
117; XT and XT+ Build default settings ;
118;-----------------------------------;
[179]119 at ROMVARS.wFlags, dw FLG_ROMVARS_DRVXLAT | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_EBIOS
[143]120 at ROMVARS.wDisplayMode, dw DEFAULT_TEXT_MODE
[137]121 at ROMVARS.wBootTimeout, dw 30 * TICKS_PER_SECOND ; Boot Menu selection timeout
[3]122 at ROMVARS.bIdeCnt, db 1 ; Number of supported controllers
123 at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
124 at ROMVARS.bMinFddCnt, db 1 ; Assume at least 1 floppy drive present if autodetect fails
125 at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory in full mode
126
[199]127 at ROMVARS.ideVars0+IDEVARS.wPort, dw DEVICE_XTIDE_DEFAULT_PORT ; Controller Command Block base port
128 at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw DEVICE_XTIDE_DEFAULT_PORTCTRL ; Controller Control Block base port
[150]129 at ROMVARS.ideVars0+IDEVARS.bDevice, db DEVICE_8BIT_DUAL_PORT_XTIDE
[3]130 at ROMVARS.ideVars0+IDEVARS.bIRQ, db 0 ; IRQ
131 at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
132 at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[143]133
134 at ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
135 at ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
136
137 at ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
138 at ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
139
140 at ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
141 at ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[175]142
143%ifdef MODULE_SERIAL
144 at ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice, db DEVICE_SERIAL_PORT
[3]145%endif
[181]146%endif
[3]147iend
148
[181]149 ; Libraries and data
150 %include "AssemblyLibrary.asm"
[186]151%ifdef MODULE_STRINGS_COMPRESSED
152 %include "StringsCompressed.asm"
153%else
[181]154 %include "Strings.asm" ; For BIOS message strings
[186]155%endif
[3]156
[181]157 ; Initialization and drive detection
158 %include "Initialize.asm" ; For BIOS initialization
159 %include "Interrupts.asm" ; For Interrupt initialization
160 %include "RamVars.asm" ; For RAMVARS initialization and access
161 %include "CreateDPT.asm" ; For creating DPTs
162 %include "FindDPT.asm" ; For finding DPTs
163 %include "AccessDPT.asm" ; For accessing DPTs
164 %include "BootInfo.asm" ; For creating BOOTNFO structs
165 %include "AtaID.asm" ; For ATA Identify Device information
166 %include "DetectDrives.asm" ; For detecting IDE drives
167 %include "DetectPrint.asm" ; For printing drive detection strings
[192]168
[181]169 ; Boot menu
170 %include "BootMenu.asm" ; For Boot Menu operations
171 %include "BootMenuEvent.asm" ; For menu library event handling
[192]172 ; NOTE: BootMenuPrint needs to come immediately after BootMenuEvent
173 %include "BootMenuPrint.asm" ; For printing Boot Menu strings
174 %include "BootPrint.asm" ; For printing boot information
175 %include "BootMenuPrintCfg.asm" ; For printing hard disk configuration
[181]176 %include "FloppyDrive.asm" ; Floppy Drive related functions
177 %include "BootSector.asm" ; For loading boot sector
[3]178
[181]179 ; Boot loader
180 %include "Int19hMenu.asm" ; For Int 19h, Boot Loader for Boot Menu
[3]181
[181]182 ; For all device types
[192]183 %include "Idepack.asm"
[181]184 %include "Device.asm"
185 %include "Timer.asm" ; For timeout and delay
[155]186
[181]187 ; IDE Device support
[238]188%define IDEDEVICE Ide
189%define ASSEMBLE_SHARED_IDE_DEVICE_FUNCTIONS
190 %include "IOMappedIDE.inc" ; Assembly IDE support for normal I/O mapped controllers
[181]191 %include "IdeCommand.asm"
192 %include "IdeTransfer.asm" ; Must be included after IdeCommand.asm
[192]193 %include "IdeWait.asm"
194 %include "IdeError.asm" ; Must be included after IdeWait.asm
[181]195 %include "IdeDPT.asm"
196 %include "IdeIO.asm"
197 %include "IdeIrq.asm"
[238]198%undef IDEDEVICE
199%undef ASSEMBLE_SHARED_IDE_DEVICE_FUNCTIONS
[155]200
[238]201 ; JR-IDE support
202%ifdef MODULE_JRIDE
203%define IDEDEVICE MemIde
204 %include "MemMappedIDE.inc" ; Assembly IDE support for memory mapped controllers
205 %include "IdeCommand.asm"
206 %include "MemIdeTransfer.asm" ; Must be included after IdeCommand.asm
207 %include "IdeWait.asm"
208 %include "IdeError.asm" ; Must be included after IdeWait.asm
209%undef IDEDEVICE
210%endif
211
212
[181]213%ifdef MODULE_SERIAL ; Serial Port Device support
214 %include "SerialCommand.asm"
215 %include "SerialDPT.asm"
[175]216%endif
[155]217
[181]218 ; INT 13h Hard Disk BIOS functions
219 %include "Int13h.asm" ; For Int 13h, Disk functions
220 %include "AH0h_HReset.asm" ; Required by Int13h_Jump.asm
221 %include "AH1h_HStatus.asm" ; Required by Int13h_Jump.asm
222 %include "AH2h_HRead.asm" ; Required by Int13h_Jump.asm
223 %include "AH3h_HWrite.asm" ; Required by Int13h_Jump.asm
224 %include "AH4h_HVerify.asm" ; Required by Int13h_Jump.asm
225 %include "AH8h_HParams.asm" ; Required by Int13h_Jump.asm
226 %include "AH9h_HInit.asm" ; Required by Int13h_Jump.asm
227 %include "AHCh_HSeek.asm" ; Required by Int13h_Jump.asm
228 %include "AHDh_HReset.asm" ; Required by Int13h_Jump.asm
229 %include "AH10h_HReady.asm" ; Required by Int13h_Jump.asm
230 %include "AH11h_HRecal.asm" ; Required by Int13h_Jump.asm
231 %include "AH15h_HSize.asm" ; Required by Int13h_Jump.asm
232 %include "AH23h_HFeatures.asm" ; Required by Int13h_Jump.asm
233 %include "AH24h_HSetBlocks.asm" ; Required by Int13h_Jump.asm
234 %include "AH25h_HDrvID.asm" ; Required by Int13h_Jump.asm
[221]235 %include "DriveXlate.asm" ; For swapping drive numbers
236 %include "Address.asm" ; For sector address translations
237 %include "Prepare.asm" ; For buffer pointer normalization
[176]238%ifdef MODULE_EBIOS
[181]239 %include "AH42h_ExtendedReadSectors.asm"
240 %include "AH43h_ExtendedWriteSectors.asm"
241 %include "AH44h_ExtendedVerifySectors.asm"
242 %include "AH47h_ExtendedSeek.asm"
243 %include "AH48h_GetExtendedDriveParameters.asm"
[221]244 %include "AH41h_CheckIfExtensionsPresent.asm"
[176]245%endif
[3]246
247
248; Fill with zeroes until size is what we want
[88]249;times (CNT_ROM_BLOCKS*512)-($-$$) db 0
Note: See TracBrowser for help on using the repository browser.