source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Main.asm@ 215

Last change on this file since 215 was 199, checked in by gregli@…, 13 years ago

Adding proper serial port support to the Configurator, which required some minor changes elsewhere. Also added an option, off by default, to automatically scan for serial drives at the end of normal drive detection (no ALT key required, although that is still available if the option is off).

File size: 10.6 KB
RevLine 
[3]1; Project name : XTIDE Universal BIOS
[86]2; Authors : Tomi Tilli
3; : aitotat@gmail.com
4; :
[181]5; : Greg Lindhorst
6; : gregli@hotmail.com
7; ;
[86]8; : Krister Nordvall
9; : krille_n_@hotmail.com
10; :
[3]11; Description : Main file for BIOS. This is the only file that needs
12; to be compiled since other files are included to this
13; file (so no linker needed, Nasm does it all).
14
15ORG 000h ; Code start offset 0000h
16
[183]17%define MENUEVENT_INLINE_OFFSETS ; Only one menu required, save space and inline offsets
18
[181]19 ; Included .inc files
20 %include "AssemblyLibrary.inc" ; Assembly Library. Must be included first!
21 %include "IntController.inc" ; For Interrupt Controller equates
22 %include "ATA_ID.inc" ; For ATA Drive Information structs
23 %include "IdeRegisters.inc" ; For ATA Registers, flags and commands
24 %include "Int13h.inc" ; Equates for INT 13h functions
[176]25%ifdef MODULE_EBIOS
[181]26 %include "EBIOS.inc" ; Equates for EBIOS functions
[176]27%endif
[181]28 %include "CustomDPT.inc" ; For Disk Parameter Table
29 %include "RomVars.inc" ; For ROMVARS and IDEVARS structs
30 %include "RamVars.inc" ; For RAMVARS struct
31 %include "BootVars.inc" ; For BOOTVARS and BOOTNFO structs
32 %include "BootMenu.inc" ; For Boot Menu
33 %include "IDE_8bit.inc" ; For IDE 8-bit data port macros
34 %include "DeviceIDE.inc" ; For IDE device equates
[3]35
36
37; Section containing code
38SECTION .text
39
40; ROM variables (must start at offset 0)
41CNT_ROM_BLOCKS EQU 16 ; 16 * 512B = 8kB BIOS
42istruc ROMVARS
43 at ROMVARS.wRomSign, dw 0AA55h ; PC ROM signature
44 at ROMVARS.bRomSize, db CNT_ROM_BLOCKS ; ROM size in 512B blocks
[181]45 at ROMVARS.rgbJump, jmp Initialize_FromMainBiosRomSearch
[88]46 at ROMVARS.rgbSign, db "XTIDE120" ; Signature for flash program
[3]47 at ROMVARS.szTitle
48 db "-=XTIDE Universal BIOS"
49%ifdef USE_AT
[88]50 db " (AT)=-",NULL
[3]51%elifdef USE_186
[88]52 db " (XT+)=-",NULL
[3]53%else
[88]54 db " (XT)=-",NULL
[3]55%endif
[97]56 at ROMVARS.szVersion, db "v1.2.0_wip (",__DATE__,")",NULL
[3]57
[179]58;;; For OR'ing into wFlags below
[181]59;;;
[179]60%ifdef MODULE_SERIAL
[181]61 MAIN_FLG_MODULE_SERIAL equ FLG_ROMVARS_MODULE_SERIAL
[179]62%else
[181]63 MAIN_FLG_MODULE_SERIAL equ 0
[179]64%endif
65
66%ifdef MODULE_EBIOS
[181]67 MAIN_FLG_MODULE_EBIOS equ FLG_ROMVARS_MODULE_EBIOS
[179]68%else
[181]69 MAIN_FLG_MODULE_EBIOS equ 0
[179]70%endif
71
[3]72;---------------------------;
73; AT Build default settings ;
74;---------------------------;
75%ifdef USE_AT
[179]76 at ROMVARS.wFlags, dw FLG_ROMVARS_FULLMODE | FLG_ROMVARS_DRVXLAT | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_EBIOS
[143]77 at ROMVARS.wDisplayMode, dw DEFAULT_TEXT_MODE
[137]78 at ROMVARS.wBootTimeout, dw 30 * TICKS_PER_SECOND ; Boot Menu selection timeout
[150]79 at ROMVARS.bIdeCnt, db 4 ; Number of supported controllers
[3]80 at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
81 at ROMVARS.bMinFddCnt, db 0 ; Do not force minimum number of floppy drives
82 at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory
83
[199]84 at ROMVARS.ideVars0+IDEVARS.wPort, dw DEVICE_ATA_DEFAULT_PORT ; Controller Command Block base port
85 at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw DEVICE_ATA_DEFAULT_PORTCTRL ; Controller Control Block base port
[150]86 at ROMVARS.ideVars0+IDEVARS.bDevice, db DEVICE_16BIT_ATA
[160]87 at ROMVARS.ideVars0+IDEVARS.bIRQ, db 0
[3]88 at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
89 at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
90
91 at ROMVARS.ideVars1+IDEVARS.wPort, dw 170h ; Controller Command Block base port
92 at ROMVARS.ideVars1+IDEVARS.wPortCtrl, dw 370h ; Controller Control Block base port
[150]93 at ROMVARS.ideVars1+IDEVARS.bDevice, db DEVICE_16BIT_ATA
[160]94 at ROMVARS.ideVars1+IDEVARS.bIRQ, db 0
[3]95 at ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
96 at ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
97
[199]98 at ROMVARS.ideVars2+IDEVARS.wPort, dw DEVICE_XTIDE_DEFAULT_PORT ; Controller Command Block base port
99 at ROMVARS.ideVars2+IDEVARS.wPortCtrl, dw DEVICE_XTIDE_DEFAULT_PORTCTRL ; Controller Control Block base port
[150]100 at ROMVARS.ideVars2+IDEVARS.bDevice, db DEVICE_8BIT_DUAL_PORT_XTIDE
101 at ROMVARS.ideVars2+IDEVARS.bIRQ, db 0
[3]102 at ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
103 at ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[143]104
105 at ROMVARS.ideVars3+IDEVARS.wPort, dw 168h ; Controller Command Block base port
106 at ROMVARS.ideVars3+IDEVARS.wPortCtrl, dw 368h ; Controller Control Block base port
[150]107 at ROMVARS.ideVars3+IDEVARS.bDevice, db DEVICE_16BIT_ATA
108 at ROMVARS.ideVars3+IDEVARS.bIRQ, db 0
[143]109 at ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
110 at ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[175]111
112%ifdef MODULE_SERIAL
113 at ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice, db DEVICE_SERIAL_PORT
114 at ROMVARS.ideVarsSerialAuto+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[181]115 at ROMVARS.ideVarsSerialAuto+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
116%endif
[3]117%else
118;-----------------------------------;
119; XT and XT+ Build default settings ;
120;-----------------------------------;
[179]121 at ROMVARS.wFlags, dw FLG_ROMVARS_DRVXLAT | MAIN_FLG_MODULE_SERIAL | MAIN_FLG_MODULE_EBIOS
[143]122 at ROMVARS.wDisplayMode, dw DEFAULT_TEXT_MODE
[137]123 at ROMVARS.wBootTimeout, dw 30 * TICKS_PER_SECOND ; Boot Menu selection timeout
[3]124 at ROMVARS.bIdeCnt, db 1 ; Number of supported controllers
125 at ROMVARS.bBootDrv, db 80h ; Boot Menu default drive
126 at ROMVARS.bMinFddCnt, db 1 ; Assume at least 1 floppy drive present if autodetect fails
127 at ROMVARS.bStealSize, db 1 ; Steal 1kB from base memory in full mode
128
[199]129 at ROMVARS.ideVars0+IDEVARS.wPort, dw DEVICE_XTIDE_DEFAULT_PORT ; Controller Command Block base port
130 at ROMVARS.ideVars0+IDEVARS.wPortCtrl, dw DEVICE_XTIDE_DEFAULT_PORTCTRL ; Controller Control Block base port
[150]131 at ROMVARS.ideVars0+IDEVARS.bDevice, db DEVICE_8BIT_DUAL_PORT_XTIDE
[3]132 at ROMVARS.ideVars0+IDEVARS.bIRQ, db 0 ; IRQ
133 at ROMVARS.ideVars0+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
134 at ROMVARS.ideVars0+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[143]135
136 at ROMVARS.ideVars1+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
137 at ROMVARS.ideVars1+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
138
139 at ROMVARS.ideVars2+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
140 at ROMVARS.ideVars2+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
141
142 at ROMVARS.ideVars3+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
143 at ROMVARS.ideVars3+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[175]144
145%ifdef MODULE_SERIAL
146 at ROMVARS.ideVarsSerialAuto+IDEVARS.bDevice, db DEVICE_SERIAL_PORT
147 at ROMVARS.ideVarsSerialAuto+IDEVARS.drvParamsMaster+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[181]148 at ROMVARS.ideVarsSerialAuto+IDEVARS.drvParamsSlave+DRVPARAMS.wFlags, db FLG_DRVPARAMS_BLOCKMODE
[3]149%endif
[181]150%endif
[3]151iend
152
[181]153 ; Libraries and data
154 %include "AssemblyLibrary.asm"
[186]155%ifdef MODULE_STRINGS_COMPRESSED
156 %include "StringsCompressed.asm"
157%else
[181]158 %include "Strings.asm" ; For BIOS message strings
[186]159%endif
[3]160
[181]161 ; Initialization and drive detection
162 %include "Initialize.asm" ; For BIOS initialization
163 %include "Interrupts.asm" ; For Interrupt initialization
164 %include "RamVars.asm" ; For RAMVARS initialization and access
165 %include "CreateDPT.asm" ; For creating DPTs
166 %include "FindDPT.asm" ; For finding DPTs
167 %include "AccessDPT.asm" ; For accessing DPTs
168 %include "BootInfo.asm" ; For creating BOOTNFO structs
169 %include "AtaID.asm" ; For ATA Identify Device information
170 %include "DetectDrives.asm" ; For detecting IDE drives
171 %include "DetectPrint.asm" ; For printing drive detection strings
[192]172
[181]173 ; Boot menu
174 %include "BootMenu.asm" ; For Boot Menu operations
175 %include "BootMenuEvent.asm" ; For menu library event handling
[192]176 ; NOTE: BootMenuPrint needs to come immediately after BootMenuEvent
177 %include "BootMenuPrint.asm" ; For printing Boot Menu strings
178 %include "BootPrint.asm" ; For printing boot information
179 %include "BootMenuPrintCfg.asm" ; For printing hard disk configuration
[181]180 %include "FloppyDrive.asm" ; Floppy Drive related functions
181 %include "BootSector.asm" ; For loading boot sector
[3]182
[181]183 ; Boot loader
[90]184%ifndef USE_AT
[181]185 %include "Int19hLate.asm" ; For late initialization
[90]186%endif
[181]187 %include "Int19hMenu.asm" ; For Int 19h, Boot Loader for Boot Menu
[3]188
[181]189 ; For all device types
[192]190 %include "Idepack.asm"
[181]191 %include "Device.asm"
192 %include "Timer.asm" ; For timeout and delay
[155]193
[181]194 ; IDE Device support
195 %include "IdeCommand.asm"
196 %include "IdeTransfer.asm" ; Must be included after IdeCommand.asm
[192]197 %include "IdeWait.asm"
198 %include "IdeError.asm" ; Must be included after IdeWait.asm
[181]199 %include "IdeDPT.asm"
200 %include "IdeIO.asm"
201 %include "IdeIrq.asm"
[155]202
[181]203%ifdef MODULE_SERIAL ; Serial Port Device support
204 %include "SerialCommand.asm"
205 %include "SerialDPT.asm"
[175]206%endif
[155]207
[181]208 ; INT 13h Hard Disk BIOS functions
209 %include "DriveXlate.asm" ; For swapping drive numbers
210 %include "Address.asm" ; For sector address translations
211 %include "CommandLookup.asm" ; For getting correct transfer command
212 %include "Int13h.asm" ; For Int 13h, Disk functions
213 %include "AH0h_HReset.asm" ; Required by Int13h_Jump.asm
214 %include "AH1h_HStatus.asm" ; Required by Int13h_Jump.asm
215 %include "AH2h_HRead.asm" ; Required by Int13h_Jump.asm
216 %include "AH3h_HWrite.asm" ; Required by Int13h_Jump.asm
217 %include "AH4h_HVerify.asm" ; Required by Int13h_Jump.asm
218 %include "AH8h_HParams.asm" ; Required by Int13h_Jump.asm
219 %include "AH9h_HInit.asm" ; Required by Int13h_Jump.asm
220 %include "AHCh_HSeek.asm" ; Required by Int13h_Jump.asm
221 %include "AHDh_HReset.asm" ; Required by Int13h_Jump.asm
222 %include "AH10h_HReady.asm" ; Required by Int13h_Jump.asm
223 %include "AH11h_HRecal.asm" ; Required by Int13h_Jump.asm
224 %include "AH15h_HSize.asm" ; Required by Int13h_Jump.asm
225 %include "AH23h_HFeatures.asm" ; Required by Int13h_Jump.asm
226 %include "AH24h_HSetBlocks.asm" ; Required by Int13h_Jump.asm
227 %include "AH25h_HDrvID.asm" ; Required by Int13h_Jump.asm
[176]228%ifdef MODULE_EBIOS
[181]229 %include "AH41h_CheckIfExtensionsPresent.asm"
230 %include "AH42h_ExtendedReadSectors.asm"
231 %include "AH43h_ExtendedWriteSectors.asm"
232 %include "AH44h_ExtendedVerifySectors.asm"
233 %include "AH47h_ExtendedSeek.asm"
234 %include "AH48h_GetExtendedDriveParameters.asm"
[176]235%endif
[3]236
237
238; Fill with zeroes until size is what we want
[88]239;times (CNT_ROM_BLOCKS*512)-($-$$) db 0
Note: See TracBrowser for help on using the repository browser.