source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/Initialize.asm@ 552

Last change on this file since 552 was 552, checked in by aitotat@…, 11 years ago

Changes to XTIDE Universal BIOS:

  • XTIDE Universal BIOS can now be initialized if non-standard main BIOS does not call INT 19h or if INT 19h handler is replaced by some other BIOS.
File size: 4.5 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Functions for initializing the BIOS.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Initializes the BIOS.
25; This function is called from main BIOS ROM search routine.
26;
27; Initialize_FromMainBiosRomSearch
28; Parameters:
29; Nothing
30; Returns:
31; Nothing
32; Corrupts registers:
33; Nothing
34;--------------------------------------------------------------------
35Initialize_FromMainBiosRomSearch: ; unused entrypoint ok
36 pushf ; To store IF
37 push ds
38
39%ifndef USE_186
40 push ax
41 LOAD_BDA_SEGMENT_TO ds, ax
42%else
43 push BYTE 0
44 pop ds
45%endif
46
47 sti ; Enable interrupts for keystrokes
48 test BYTE [BDA.bKBFlgs1], (1<<2) ; Clears ZF if CTRL is held down
49 jnz SHORT .SkipRomInitialization
50
51 ; Install INT 19h handler (boot loader) where drives are detected
52 mov WORD [BIOS_BOOT_LOADER_INTERRUPT_19h*4], Int19h_BootLoaderHandler
53 mov [BIOS_BOOT_LOADER_INTERRUPT_19h*4+2], cs
54
55 ; Install special INT 13h hander that initialized XTIDE Universal BIOS
56 ; when our INT 19h is not called
57 les ax, [BIOS_DISK_INTERRUPT_13h*4] ; Load system INT 13h handler
58 mov [TEMPORARY_VECTOR_FOR_SYSTEM_INT13h*4], ax
59 mov [TEMPORARY_VECTOR_FOR_SYSTEM_INT13h*4+2], es
60 mov WORD [BIOS_DISK_INTERRUPT_13h*4], Int13hBiosInit_Handler
61 mov [BIOS_DISK_INTERRUPT_13h*4+2], cs
62
63.SkipRomInitialization:
64%ifndef USE_186
65 pop ax
66%endif
67 pop ds
68 popf
69 retf
70
71
72;--------------------------------------------------------------------
73; Initializes the BIOS variables and detects IDE drives.
74;
75; Initialize_AndDetectDrives
76; Parameters:
77; ES: BDA Segment
78; Returns:
79; DS: RAMVARS segment
80; Corrupts registers:
81; All, except ES
82;--------------------------------------------------------------------
83Initialize_AndDetectDrives:
84 call DetectPrint_InitializeDisplayContext
85 call DetectPrint_RomFoundAtSegment
86 call RamVars_Initialize
87 call BootVars_Initialize
88 call Interrupts_InitializeInterruptVectors ; HotkeyBar requires INT 40h so install handlers before drive detection
89 call DetectDrives_FromAllIDEControllers
90 ; Fall to .StoreDptPointersToIntVectors
91
92
93%ifdef MODULE_COMPATIBLE_TABLES
94;--------------------------------------------------------------------
95; .StoreDptPointersToIntVectors
96; Parameters:
97; DS: RAMVARS segment
98; ES: BDA and interrupt vector segment (zero)
99; Returns:
100; Nothing
101; Corrupts registers:
102; AX, CX, DX, SI, DI
103;--------------------------------------------------------------------
104.StoreDptPointersToIntVectors:
105%ifndef USE_AT
106 test BYTE [cs:ROMVARS.wFlags], FLG_ROMVARS_FULLMODE
107 jz SHORT .CompatibleDPTsCreated ; Only Full operating mode has extra RAM to spare
108%endif
109
110 mov dl, 80h
111 call FindDPT_ForDriveNumberInDL ; DPT to DS:DI
112 jc SHORT .FindForDrive81h ; Store nothing if not our drive
113
114 call CompatibleDPT_CreateToAXSIforDriveDL
115 mov [es:HD0_DPT_POINTER_41h*4], si
116 mov [es:HD0_DPT_POINTER_41h*4+2], ax
117
118.FindForDrive81h:
119 mov dl, 81h
120 call FindDPT_ForDriveNumberInDL
121 jc SHORT .CompatibleDPTsCreated
122
123 call CompatibleDPT_CreateToAXSIforDriveDL
124 mov [es:HD1_DPT_POINTER_46h*4], si
125 mov [es:HD1_DPT_POINTER_46h*4+2], ax
126.CompatibleDPTsCreated:
127 ; Fall to .ResetDetectedDrives
128%endif ; MODULE_COMPATIBLE_TABLES
129
130
131;--------------------------------------------------------------------
132; .ResetDetectedDrives
133; Parameters:
134; DS: RAMVARS segment
135; ES: BDA and interrupt vector segment (zero)
136; Returns:
137; Nothing
138; Corrupts registers:
139; All, except DS and ES
140;--------------------------------------------------------------------
141.ResetDetectedDrives:
142 call Idepack_FakeToSSBP
143 call AH0h_ResetAllOurHardDisksAtTheEndOfDriveInitialization
144 add sp, BYTE SIZE_OF_IDEPACK_WITHOUT_INTPACK
145 ret
Note: See TracBrowser for help on using the repository browser.