source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm @ 392

Last change on this file since 392 was 392, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Greatly improved Hotkey Bar is displayed during drive detection.
  • 8k builds no longer include boot menu.
  • Boot menu is displayed only if F2 is pressed during drive detection.
  • Some changes to directory structure.


File size: 8.6 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for printing drive detection strings.
3
4;
5; XTIDE Universal BIOS and Associated Tools 
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12; 
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.     
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;       
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; DetectPrint_InitializeDisplayContext
25;   Parameters:
26;       Nothing
27;   Returns:
28;       Nothing
29;   Corrupts registers:
30;       AX, DI
31;--------------------------------------------------------------------
32DetectPrint_InitializeDisplayContext:
33    CALL_DISPLAY_LIBRARY    InitializeDisplayContext
34    ret
35
36
37;--------------------------------------------------------------------
38; DetectPrint_GetSoftwareCoordinatesToAX
39;   Parameters:
40;       Nothing
41;   Returns:
42;       Nothing
43;   Corrupts registers:
44;       AX, DI
45;--------------------------------------------------------------------
46DetectPrint_GetSoftwareCoordinatesToAX:
47    CALL_DISPLAY_LIBRARY    GetSoftwareCoordinatesToAX
48    ret
49
50
51;--------------------------------------------------------------------
52; Prints BIOS name and segment address where it is found.
53;
54; DetectPrint_RomFoundAtSegment
55;   Parameters:
56;       Nothing
57;   Returns:
58;       Nothing
59;   Corrupts registers:
60;       AX, SI, DI
61;--------------------------------------------------------------------
62DetectPrint_RomFoundAtSegment:
63    push    bp
64    mov     bp, sp
65    mov     si, g_szRomAt
66    ePUSH_T ax, ROMVARS.szTitle         ; Bios title string
67    push    cs                          ; BIOS segment
68
69    jmp     DetectPrint_FormatCSSIfromParamsInSSBP
70
71
72;--------------------------------------------------------------------
73; DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
74;   Parameters:
75;       CS:CX:  Ptr to "Master" or "Slave" string
76;       CS:BP:  Ptr to IDEVARS
77;       SI:     Ptr to template string
78;   Returns:
79;       Nothing
80;   Corrupts registers:
81;       AX, SI, DI, CX
82;--------------------------------------------------------------------
83DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP:
84    mov     ax, [cs:bp+IDEVARS.wPort]       ; for IDE: AX=port address, DH=.bDevice
85    mov     dx, [cs:bp+IDEVARS.bDevice-1]   ; for Serial: AL=port address>>2, AH=baud rate
86                                            ;             DL=COM number character, DH=.bDevice
87%ifdef MODULE_JRIDE
88    cmp     dh, DEVICE_JRIDE_ISA
89    eCMOVE  ax, cs                          ; Use segment address for JR-IDE/ISA
90%endif
91
92    push    bp                              ; setup stack for call to
93    mov     bp, sp                          ; BootMenuPrint_FormatCSSIfromParamsInSSBP
94
95    push    cx                              ; Push "Master" or "Slave"
96
97    mov     cl, (g_szDetectPort-$$) & 0xff  ; Setup print string for standard IDE
98                                            ; Note that we modify only the low order bits of CX a lot here,
99                                            ; saving code space rather than reloading CX completely.
100                                            ; This optimization requires that all the g_szDetect* strings are
101                                            ; on the same 256 byte page, which is checked in strings.asm.
102
103%ifdef MODULE_SERIAL
104    cmp     dh, DEVICE_SERIAL_PORT          ; Check if this is a serial device
105
106    jnz     .pushAndPrint                   ; CX = string to print, AX = port address, DX won't be used
107
108    mov     cl, (g_szDetectCOM-$$) & 0xff   ; Setup print string for COM ports
109    push    cx                              ; And push now.  We use the fact that format strings can contain
110                                            ; themselves format strings.
111
112    push    dx                              ; Push COM number character
113                                            ; If the string is going to be "Auto", we will push a NULL (zero)
114                                            ; here for the COM port number, which will be eaten by the
115                                            ; print routine (DisplayPrint_CharacterFromAL), resulting in
116                                            ; just "COM" being printed without a character after it.
117
118    mov     cl, (g_szDetectCOMAuto-$$) & 0xff   ; Setup secondary print string for "Auto"
119
120    test    dl, dl                          ; Check if serial port "Auto"
121    jz      .pushAndPrintSerial             ; CX = string to print, AX and DX won't be used
122
123    mov     cl, (g_szDetectCOMLarge-$$) & 0xff  ; Setup secondary print string for "COMn/xx.yK"
124
125    mov     al,ah                           ; baud rate divisor to AL
126    cbw                                     ; clear AH, AL will always be less than 128
127    xchg    si,ax                           ; move AX to SI for divide
128    mov     ax,1152                         ; baud rate to display is 115200/divisor, the "00" is handled
129                                            ; in the print strings
130    cwd                                     ; clear top 16-bits of dividend
131    div     si                              ; and divide...  Now AX = baud rate/100, DX = 0 (always a clean divide)
132
133    mov     si,10                           ; Now separate the whole portion from the fractional for "K" display
134    div     si                              ; and divide...  Now AX = baud rate/1000, DX = low order digit
135
136    cmp     ax,si                           ; < 10: "2400", "9600", etc.; >= 10: "19.2K", "38.4K", etc.
137    jae     .pushAndPrintSerial
138
139    mov     cl, (g_szDetectCOMSmall-$$) & 0xff  ; Setup secondary print string for "COMn/XXy00"
140
141.pushAndPrintSerial:
142.pushAndPrint:
143%endif
144
145    push    cx                              ; Push print string
146    push    ax                              ; Push high order digits, or port address, or N/A
147    push    dx                              ; Push low order digit, or N/A
148
149    mov     si, g_szDetectOuter             ; Load SI with default wrapper string "IDE %s at %s: "
150
151    jmp     SHORT DetectPrint_FormatCSSIfromParamsInSSBP
152
153
154;--------------------------------------------------------------------
155; DetectPrint_DriveNameFromBootnfoInESBX
156;   Parameters:
157;       ES:BX:  Ptr to BOOTMENUINFO (if drive found)
158;   Returns:
159;       Nothing
160;   Corrupts registers:
161;       AX, SI
162;--------------------------------------------------------------------
163DetectPrint_DriveNameFromBootnfoInESBX:
164    push    di
165    push    bx
166
167    lea     si, [bx+BOOTMENUINFO.szDrvName]
168    mov     bx, es
169    CALL_DISPLAY_LIBRARY PrintNullTerminatedStringFromBXSI
170    CALL_DISPLAY_LIBRARY PrintNewlineCharacters
171
172    pop     bx
173    pop     di
174    ret
175
176;--------------------------------------------------------------------
177; DetectPrint_FailedToLoadFirstSector
178;   Parameters:
179;       AH:     INT 13h error code
180;   Returns:
181;       Nothing
182;   Corrupts registers:
183;       AX, CX, SI, DI
184;--------------------------------------------------------------------
185DetectPrint_FailedToLoadFirstSector:
186    push    bp
187    mov     bp, sp
188    eMOVZX  cx, ah
189    push    cx                  ; Push INT 13h error code
190    mov     si, g_szReadError
191    jmp     SHORT DetectPrint_FormatCSSIfromParamsInSSBP
192
193
194;--------------------------------------------------------------------
195; DetectPrint_TryToBootFromDL
196;   Parameters:
197;       DL:     Drive to boot from (translated, 00h or 80h)
198;       DS:     RAMVARS segment
199;   Returns:
200;       Nothing
201;   Corrupts registers:
202;       AX, DH, SI, DI
203;--------------------------------------------------------------------
204DetectPrint_TryToBootFromDL:
205    push    bp
206    mov     bp, sp
207
208    call    DriveXlate_ToOrBack ; DL = Untranslated Drive number
209    mov     dh, dl
210    call    DriveXlate_ToOrBack ; DL = Translated Drive number
211
212    call    HotkeyBar_ConvertDriveNumberFromDLtoDriveLetter ; DL = Translated letter
213    xchg    dl, dh
214    call    HotkeyBar_ConvertDriveNumberFromDLtoDriveLetter ; DL = Untranslated letter
215    push    dx
216    xchg    dl, dh
217    push    dx
218
219    call    ConvertDriveLetterInDLtoDriveNumber ; Restore DL
220
221    mov     si, g_szTryToBoot
222    jmp     SHORT DetectPrint_FormatCSSIfromParamsInSSBP   
223
224
225;--------------------------------------------------------------------
226; DetectPrint_NullTerminatedStringFromCSSIandSetCF
227;   Parameters:
228;       CS:SI:  Ptr to NULL terminated string to print
229;   Returns:
230;       CF:     Set since menu event was handled successfully
231;   Corrupts registers:
232;       AX, DI
233;--------------------------------------------------------------------
234DetectPrint_NullTerminatedStringFromCSSIandSetCF:
235;
236; We send all CSSI strings through the Format routine for the case of
237; compressed strings, but this doesn't hurt in the non-compressed case either
238; (perhaps a little slower, but shouldn't be noticeable to the user)
239; and results in smaller code size.
240;
241    push    bp
242    mov     bp,sp
243    ; Fall to DetectPrint_FormatCSSIfromParamsInSSBP
244
245;--------------------------------------------------------------------
246; DetectPrint_FormatCSSIfromParamsInSSBP
247;   Parameters:
248;       CS:SI:  Ptr to string to format
249;       BP:     SP before pushing parameters
250;   Returns:
251;       BP:     Popped from stack
252;       CF:     Set since menu event was handled successfully
253;   Corrupts registers:
254;       AX, DI
255;--------------------------------------------------------------------
256DetectPrint_FormatCSSIfromParamsInSSBP:
257    CALL_DISPLAY_LIBRARY FormatNullTerminatedStringFromCSSI
258    stc             ; Successful return from menu event
259    pop     bp
260    ret
Note: See TracBrowser for help on using the repository browser.