source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectPrint.asm@ 254

Last change on this file since 254 was 254, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • Changed BOOTNFO to BOOTMENUINFO and moved it to BootMenu.inc.
File size: 4.5 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Functions for printing drive detection strings.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Prints BIOS name and segment address where it is found.
9;
10; DetectPrint_RomFoundAtSegment
11; Parameters:
12; Nothing
13; Returns:
14; Nothing
15; Corrupts registers:
16; AX, SI, DI
17;--------------------------------------------------------------------
18DetectPrint_RomFoundAtSegment:
19 push bp
20 mov bp, sp
21 mov si, g_szRomAt
22 ePUSH_T ax, ROMVARS.szTitle ; Bios title string
23 push cs ; BIOS segment
24
25DetectPrint_BootMenuPrint_FormatCSSIfromParamsInSSBP_Relay:
26 jmp BootMenuPrint_FormatCSSIfromParamsInSSBP
27
28
29;--------------------------------------------------------------------
30; DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
31; Parameters:
32; CS:CX: Ptr to "Master" or "Slave" string
33; CS:BP: Ptr to IDEVARS
34; SI: Ptr to template string
35; Returns:
36; Nothing
37; Corrupts registers:
38; AX, SI, DI, CX
39;--------------------------------------------------------------------
40DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP:
41
42 mov ax, [cs:bp+IDEVARS.wPort] ; for IDE: AX=port address, DH=.bDevice
43 mov dx, [cs:bp+IDEVARS.bDevice-1] ; for Serial: AL=port address>>2, AH=baud rate
44 ; DL=COM number character, DH=.bDevice
45
46 push bp ; setup stack for call to
47 mov bp, sp ; BootMenuPrint_FormatCSSIfromParamsInSSBP
48
49 push cx ; Push "Master" or "Slave"
50
51 mov cl, (g_szDetectPort-$$) & 0xff ; Setup print string for standard IDE
52 ; Note that we modify only the low order bits of CX a lot here,
53 ; saving code space rather than reloading CX completely.
54 ; This optimization requires that all the g_szDetect* strings are
55 ; on the same 256 byte page, which is checked in strings.asm.
56
57 cmp dh, DEVICE_SERIAL_PORT ; Check if this is a serial device
58
59 jnz .pushAndPrint ; CX = string to print, AX = port address, DX won't be used
60
61 mov cl, (g_szDetectCOM-$$) & 0xff ; Setup print string for COM ports
62 push cx ; And push now. We use the fact that format strings can contain
63 ; themselves format strings.
64
65 push dx ; Push COM number character
66 ; If the string is going to be "Auto", we will push a NULL (zero)
67 ; here for the COM port number, which will be eaten by the
68 ; print routine (DisplayPrint_CharacterFromAL), resulting in
69 ; just "COM" being printed without a character after it.
70
71 mov cl, (g_szDetectCOMAuto-$$) & 0xff ; Setup secondary print string for "Auto"
72
73 test dl, dl ; Check if serial port "Auto"
74 jz .pushAndPrint ; CX = string to print, AX and DX won't be used
75
76 mov cl, (g_szDetectCOMLarge-$$) & 0xff ; Setup secondary print string for "COMn/xx.yK"
77
78 mov al,ah ; baud rate divisor to AL
79 cbw ; clear AH, AL will always be less than 128
80 xchg si,ax ; move AX to SI for divide
81 mov ax,1152 ; baud rate to display is 115200/divisor, the "00" is handled
82 ; in the print strings
83 cwd ; clear top 16-bits of dividend
84 div si ; and divide... Now AX = baud rate/100, DX = 0 (always a clean divide)
85
86 mov si,10 ; Now separate the whole portion from the fractional for "K" display
87 div si ; and divide... Now AX = baud rate/1000, DX = low order digit
88
89 cmp ax,si ; < 10: "2400", "9600", etc.; >= 10: "19.2K", "38.4K", etc.
90 jae .pushAndPrint
91
92 mov cl, (g_szDetectCOMSmall-$$) & 0xff ; Setup secondary print string for "COMn/XXy00"
93
94.pushAndPrint:
95 push cx ; Push print string
96 push ax ; Push high order digits, or port address, or N/A
97 push dx ; Push low order digit, or N/A
98
99 mov si, g_szDetectOuter ; Finally load SI with wrapper string "IDE %s at %s: "
100
101 jmp short DetectPrint_BootMenuPrint_FormatCSSIfromParamsInSSBP_Relay
102
103
104;--------------------------------------------------------------------
105; DetectPrint_DriveNameFromBootnfoInESBX
106; Parameters:
107; ES:BX: Ptr to BOOTMENUINFO (if drive found)
108; Returns:
109; Nothing
110; Corrupts registers:
111; AX, SI
112;--------------------------------------------------------------------
113DetectPrint_DriveNameFromBootnfoInESBX:
114 push di
115 push bx
116
117 lea si, [bx+BOOTMENUINFO.szDrvName]
118 mov bx, es
119 CALL_DISPLAY_LIBRARY PrintNullTerminatedStringFromBXSI
120 CALL_DISPLAY_LIBRARY PrintNewlineCharacters
121
122 pop bx
123 pop di
124 ret
Note: See TracBrowser for help on using the repository browser.