source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm @ 534

Last change on this file since 534 was 528, checked in by aitotat@…, 11 years ago

Changes to XTIDE Universal BIOS:

  • Swapping Floppy and Hard Drives at the same time work again (broke in r492).
  • Hotkeys again work in boot menu (broke in r492).
File size: 10.0 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for detecting drive for the BIOS.
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Detects all IDE hard disks to be controlled by this BIOS.
25;
26; DetectDrives_FromAllIDEControllers
27;   Parameters:
28;       DS:     RAMVARS segment
29;       ES:     BDA segment (zero)
30;   Returns:
31;       Nothing
32;   Corrupts registers:
33;       All (not segments)
34;--------------------------------------------------------------------
35DetectDrives_FromAllIDEControllers:
36    call    RamVars_GetIdeControllerCountToCX
37    mov     bp, ROMVARS.ideVars0            ; CS:BP now points to first IDEVARS
38
39.DriveDetectLoop:                           ; Loop through IDEVARS
40    push    cx
41
42    mov     cx, g_szDetectMaster
43    mov     bh, MASK_DRVNHEAD_SET                               ; Select Master drive
44    call    StartDetectionWithDriveSelectByteInBHandStringInCX  ; Detect and create DPT + BOOTNFO
45
46    mov     cx, g_szDetectSlave
47    mov     bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
48    call    StartDetectionWithDriveSelectByteInBHandStringInCX
49
50    pop     cx
51
52    add     bp, BYTE IDEVARS_size           ; Point to next IDEVARS
53
54%ifdef MODULE_SERIAL
55    jcxz    .AddHardDisks                   ; Set to zero on .ideVarsSerialAuto iteration (if any)
56%endif
57    loop    .DriveDetectLoop
58
59%ifdef MODULE_SERIAL
60;----------------------------------------------------------------------
61;
62; if serial drive detected, do not scan (avoids duplicate drives and isn't needed - we already have a connection)
63;
64    call    FindDPT_ToDSDIforSerialDevice   ; does not modify AX
65    jnc     .AddHardDisks
66
67    mov     bp, ROMVARS.ideVarsSerialAuto   ; Point to our special IDEVARS structure, just for serial scans
68
69%ifdef MODULE_HOTKEYS
70    cmp     al, COM_DETECT_HOTKEY_SCANCODE  ; Set by last call to HotkeyBar_UpdateDuringDriveDetection above
71    je      .DriveDetectLoop
72%endif
73
74    mov     al,[cs:ROMVARS.wFlags]          ; Configurator set to always scan?
75    or      al,[es:BDA.bKBFlgs1]            ; Or, did the user hold down the ALT key?
76    and     al,8                            ; 8 = alt key depressed, same as FLG_ROMVARS_SERIAL_ALWAYSDETECT
77    jnz     .DriveDetectLoop
78%endif
79
80.AddHardDisks:
81;----------------------------------------------------------------------
82;
83; Add in hard disks to BDA, finalize our Count and First variables
84;
85; Note that we perform the add to bHDCount and store bFirstDrv even if the count is zero.
86; This is done because we use the value of .bFirstDrv to know how many drives were in the system
87; at the time of boot, and to return that number on int13h/8h calls.  Because the count is zero,
88; FindDPT_ForDriveNumber will not find any drives that are ours.
89;
90    mov     cx, [RAMVARS.wDrvCntAndFlopCnt]     ; Our count of hard disks
91
92    mov     al, [es:BDA.bHDCount]
93    add     cl, al                      ; Add our drives to the system count
94    mov     [es:BDA.bHDCount], cl
95    or      al, 80h                     ; Or in hard disk flag
96    mov     [RAMVARS.bFirstDrv], al     ; Store first drive number
97
98.AddFloppies:
99%ifdef MODULE_SERIAL_FLOPPY
100;----------------------------------------------------------------------
101;
102; Add in any emulated serial floppy drives, finalize our packed Count and First variables
103;
104    dec     ch
105    mov     al, ch
106    js      .NoFloppies                     ; if no drives are present, we store 0ffh
107
108    call    FloppyDrive_GetCountFromBIOS_or_BDA
109
110    push    ax
111
112    add     al, ch                          ; Add our drives to existing drive count
113    cmp     al, 3                           ; For BDA, max out at 4 drives (ours is zero based)
114    jb      .MaxBDAFloppiesExceeded
115    mov     al, 3
116.MaxBDAFloppiesExceeded:
117    eROR_IM al, 2                           ; move to bits 6-7
118    inc     ax                              ; low order bit, indicating floppy drive exists
119
120    mov     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
121    and     ah, 03eh                        ; Mask off drive number and drives present bit
122    or      al, ah                          ; Or in new values
123    mov     [es:BDA.wEquipment], al         ; and store
124
125    mov     al, 1eh                         ; BDA pointer to Floppy DPT
126    mov     si, AH8h_FloppyDPT
127    call    Interrupts_InstallHandlerToVectorInALFromCSSI
128
129    pop     ax
130
131    shr     ch, 1                           ; number of drives, 1 or 2 only, to CF flag (clear=1, set=2)
132    rcl     al, 1                           ; starting drive number in upper 7 bits, number of drives in low bit
133.NoFloppies:
134    mov     [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], al
135%endif
136
137    ret
138
139%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
140    %if FLG_ROMVARS_SERIAL_SCANDETECT != 8
141        %error "DetectDrives is currently coded to assume that FLG_ROMVARS_SERIAL_SCANDETECT is the same bit as the ALT key code in the BDA.  Changes in the code will be needed if these values are no longer the same."
142    %endif
143%endif
144
145
146;--------------------------------------------------------------------
147; StartDetectionWithDriveSelectByteInBHandStringInCX
148;   Parameters:
149;       BH:     Drive Select byte for Drive and Head Register
150;       CX:     Offset to "Master" or "Slave" string
151;       CS:BP:  Ptr to IDEVARS for the drive
152;       DS:     RAMVARS segment
153;       ES:     Zero (BDA segment)
154;   Returns:
155;       None
156;   Corrupts registers:
157;       AX, BL, CX, DX, SI, DI
158;--------------------------------------------------------------------
159StartDetectionWithDriveSelectByteInBHandStringInCX:
160%ifdef MODULE_8BIT_IDE_ADVANCED
161    ; Autodetect port for XT-CF
162    call    DetectDrives_DoesIdevarsInCSBPbelongToXTCF
163    jne     SHORT .SkipXTCFportDetection
164
165    ; XT-CF do not support slave drives so skip detection
166    test    bh, FLG_DRVNHEAD_DRV
167    jnz     SHORT NoSlaveDriveAvailable
168
169    ; XT-CF do not support slave drives so we can safely update port
170    ; for next drive (another XT-CF card on same system)
171.DetectNextPort:
172    mov     dx, [es:BOOTVARS.wNextXTCFportToScan]
173    xor     dl, 40h
174    jnz     SHORT .StoreNextXTCFportToScan
175    inc     dh
176    cmp     dh, XTCF_BASE_PORT_4 >> 8
177    ja      SHORT .SkipXTCFportDetection        ; XT-CF not found from any port
178.StoreNextXTCFportToScan:
179    mov     [es:BOOTVARS.wNextXTCFportToScan], dx
180
181    call    AH1Eh_DetectXTCFwithBasePortInDX
182    jc      SHORT .DetectNextPort               ; XT-CF not found from this port
183
184    ; We now have autodetected port in DX
185    push    dx
186    xchg    ax, dx                              ; Port to print in AX
187    call    DetectPrint_StartDetectWithAutodetectedBasePortInAXandIdeVarsInCSBP
188    jmp     SHORT .DriveDetectionStringPrintedOnScreen
189
190    ; Print detect string for devices that do not support autodetection
191.SkipXTCFportDetection:
192    push    dx
193%endif ; MODULE_8BIT_IDE_ADVANCED
194
195    call    DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
196.DriveDetectionStringPrintedOnScreen:
197%ifdef MODULE_HOTKEYS
198    call    HotkeyBar_UpdateDuringDriveDetection
199%endif
200
201%ifdef MODULE_8BIT_IDE_ADVANCED
202    pop     dx
203%endif
204    ; Fall to .ReadAtaInfoFromHardDisk
205
206
207;--------------------------------------------------------------------
208; .ReadAtaInfoFromHardDisk
209;   Parameters:
210;       BH:     Drive Select byte for Drive and Head Register
211;       DX:     Autodetected port (for devices that support autodetection)
212;       CS:BP:  Ptr to IDEVARS for the drive
213;       DS:     RAMVARS segment
214;       ES:     Zero (BDA segment)
215;   Returns:
216;       CF:     Cleared if ATA-information read successfully
217;               Set if any error
218;   Corrupts registers:
219;       AX, BL, CX, DX, SI, DI
220;--------------------------------------------------------------------
221.ReadAtaInfoFromHardDisk:
222    mov     si, BOOTVARS.rgbAtaInfo     ; ES:SI now points to ATA info location
223    push    es
224    push    si
225    push    dx
226    push    bx
227    call    Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
228    pop     bx
229    pop     dx
230    pop     si
231    pop     es
232    jnc     SHORT CreateBiosTablesForHardDisk
233    ; Fall to .ReadAtapiInfoFromDrive
234
235.ReadAtapiInfoFromDrive:                ; Not yet implemented
236    ;call   ReadAtapiInfoFromDrive      ; Assume CD-ROM
237    ;jnc    SHORT _CreateBiosTablesForCDROM
238
239    ;jmp    short DetectDrives_DriveNotFound
240;;; fall-through instead of previous jmp instruction
241;--------------------------------------------------------------------
242; DetectDrives_DriveNotFound
243;   Parameters:
244;       Nothing
245;   Returns:
246;       CF:     Set (from DetectPrint_NullTerminatedStringFromCSSIandSetCF)
247;   Corrupts registers:
248;       AX, SI
249;--------------------------------------------------------------------
250DetectDrives_DriveNotFound:
251    mov     si, g_szNotFound
252    jmp     DetectPrint_NullTerminatedStringFromCSSIandSetCF
253
254
255;--------------------------------------------------------------------
256; CreateBiosTablesForHardDisk
257;   Parameters:
258;       BH:     Drive Select byte for Drive and Head Register
259;       DX:     Autodetected port (for devices that support autodetection)
260;       CS:BP:  Ptr to IDEVARS for the drive
261;       ES:SI   Ptr to ATA information for the drive
262;       DS:     RAMVARS segment
263;       ES:     BDA segment
264;   Returns:
265;       Nothing
266;   Corrupts registers:
267;       AX, BX, CX, DX, SI, DI
268;--------------------------------------------------------------------
269CreateBiosTablesForHardDisk:
270    push    bx
271    call    AtaID_VerifyFromESSI
272    pop     bx
273    jc      SHORT DetectDrives_DriveNotFound
274    call    CreateDPT_FromAtaInformation
275    jc      SHORT DetectDrives_DriveNotFound
276    call    DriveDetectInfo_CreateForHardDisk
277    jmp     SHORT DetectPrint_DriveNameFromDrvDetectInfoInESBX
278
279
280%ifdef MODULE_8BIT_IDE_ADVANCED
281;--------------------------------------------------------------------
282; DetectDrives_DoesIdevarsInCSBPbelongToXTCF
283;   Parameters:
284;       CS:BP:  Ptr to IDEVARS for the drive
285;   Returns:
286;       ZF:     Set if IDEVARS belongs to XT-CF device
287;               Cleared if some other device
288;   Corrupts registers:
289;       AL
290;--------------------------------------------------------------------
291DetectDrives_DoesIdevarsInCSBPbelongToXTCF:
292    mov     al, [cs:bp+IDEVARS.bDevice]
293    cmp     al, DEVICE_8BIT_XTCF_PIO8
294    je      SHORT .DeviceIsXTCF
295    cmp     al, DEVICE_8BIT_XTCF_DMA
296    je      SHORT .DeviceIsXTCF
297    cmp     al, DEVICE_8BIT_XTCF_MEMMAP
298.DeviceIsXTCF:
299NoSlaveDriveAvailable:
300    ret
301%endif ; MODULE_8BIT_IDE_ADVANCED
Note: See TracBrowser for help on using the repository browser.