source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm @ 392

Last change on this file since 392 was 392, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Greatly improved Hotkey Bar is displayed during drive detection.
  • 8k builds no longer include boot menu.
  • Boot menu is displayed only if F2 is pressed during drive detection.
  • Some changes to directory structure.


File size: 7.6 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for detecting drive for the BIOS.
3
4;
5; XTIDE Universal BIOS and Associated Tools 
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12; 
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
16; GNU General Public License for more details.     
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;       
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Detects all IDE hard disks to be controlled by this BIOS.
25;
26; DetectDrives_FromAllIDEControllers
27;   Parameters:
28;       DS:     RAMVARS segment
29;       ES:     BDA segment (zero)
30;   Returns:
31;       Nothing
32;   Corrupts registers:
33;       All (not segments)
34;--------------------------------------------------------------------
35DetectDrives_FromAllIDEControllers:
36    call    RamVars_GetIdeControllerCountToCX
37    mov     bp, ROMVARS.ideVars0            ; CS:BP now points to first IDEVARS
38
39.DriveDetectLoop:                           ; Loop through IDEVARS
40    push    cx
41
42    mov     cx, g_szDetectMaster
43    mov     bh, MASK_DRVNHEAD_SET                               ; Select Master drive
44    call    StartDetectionWithDriveSelectByteInBHandStringInCX  ; Detect and create DPT + BOOTNFO
45
46    mov     cx, g_szDetectSlave
47    mov     bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
48    call    StartDetectionWithDriveSelectByteInBHandStringInCX
49
50    pop     cx
51
52    add     bp, BYTE IDEVARS_size           ; Point to next IDEVARS
53
54%ifdef MODULE_SERIAL
55    jcxz    .AddHardDisks                   ; Set to zero on .ideVarsSerialAuto iteration (if any)
56%endif
57    loop    .DriveDetectLoop
58
59%ifdef MODULE_SERIAL
60;----------------------------------------------------------------------
61;
62; if serial drive detected, do not scan (avoids duplicate drives and isn't needed - we already have a connection)
63;
64    call    FindDPT_ToDSDIforSerialDevice
65    jnc     .AddHardDisks
66
67    mov     bp, ROMVARS.ideVarsSerialAuto   ; Point to our special IDEVARS structure, just for serial scans
68
69    mov     al,[cs:ROMVARS.wFlags]          ; Configurator set to always scan?
70    or      al,[es:BDA.bKBFlgs1]            ; Or, did the user hold down the ALT key?
71    and     al,8                            ; 8 = alt key depressed, same as FLG_ROMVARS_SERIAL_ALWAYSDETECT
72    jnz     .DriveDetectLoop
73%endif
74
75.AddHardDisks:
76;----------------------------------------------------------------------
77;
78; Add in hard disks to BDA, finalize our Count and First variables
79;
80; Note that we perform the add to bHDCount and store bFirstDrv even if the count is zero.
81; This is done because we use the value of .bFirstDrv to know how many drives were in the system
82; at the time of boot, and to return that number on int13h/8h calls.  Because the count is zero,
83; FindDPT_ForDriveNumber will not find any drives that are ours.
84;
85    mov     cx, [RAMVARS.wDrvCntAndFlopCnt]     ; Our count of hard disks
86
87    mov     al, [es:BDA.bHDCount]
88    add     cl, al                      ; Add our drives to the system count
89    mov     [es:BDA.bHDCount], cl
90    or      al, 80h                     ; Or in hard disk flag
91    mov     [RAMVARS.bFirstDrv], al     ; Store first drive number
92
93.AddFloppies:
94%ifdef MODULE_SERIAL_FLOPPY
95;----------------------------------------------------------------------
96;
97; Add in any emulated serial floppy drives, finalize our packed Count and First variables
98;
99    dec     ch
100    mov     al, ch
101    js      .NoFloppies                     ; if no drives are present, we store 0ffh
102
103    call    FloppyDrive_GetCountFromBIOS_or_BDA
104
105    push    ax
106
107    add     al, ch                          ; Add our drives to existing drive count
108    cmp     al, 3                           ; For BDA, max out at 4 drives (ours is zero based)
109    jb      .MaxBDAFloppiesExceeded
110    mov     al, 3
111.MaxBDAFloppiesExceeded:
112    eROR_IM al, 2                           ; move to bits 6-7
113    inc     ax                              ; low order bit, indicating floppy drive exists
114
115    mov     ah, [es:BDA.wEquipment]         ; Load Equipment WORD low byte
116    and     ah, 03eh                        ; Mask off drive number and drives present bit
117    or      al, ah                          ; Or in new values
118    mov     [es:BDA.wEquipment], al         ; and store
119
120    mov     al, 1eh                         ; BDA pointer to Floppy DPT
121    mov     si, AH8h_FloppyDPT
122    call    Interrupts_InstallHandlerToVectorInALFromCSSI
123
124    pop     ax
125
126    shr     ch, 1                           ; number of drives, 1 or 2 only, to CF flag (clear=1, set=2)
127    rcl     al, 1                           ; starting drive number in upper 7 bits, number of drives in low bit
128.NoFloppies:
129    mov     [RAMVARS.xlateVars+XLATEVARS.bFlopCntAndFirst], al
130%endif
131
132    ret
133
134%ifndef CHECK_FOR_UNUSED_ENTRYPOINTS
135    %if FLG_ROMVARS_SERIAL_SCANDETECT != 8
136        %error "DetectDrives is currently coded to assume that FLG_ROMVARS_SERIAL_SCANDETECT is the same bit as the ALT key code in the BDA.  Changes in the code will be needed if these values are no longer the same."
137    %endif
138%endif
139
140
141;--------------------------------------------------------------------
142; StartDetectionWithDriveSelectByteInBHandStringInCX
143;   Parameters:
144;       BH:     Drive Select byte for Drive and Head Register
145;       CX:     Offset to "Master" or "Slave" string
146;       CS:BP:  Ptr to IDEVARS for the drive
147;       DS:     RAMVARS segment
148;       ES:     Zero (BDA segment)
149;   Returns:
150;       None
151;   Corrupts registers:
152;       AX, BX, CX, DX, SI, DI
153;--------------------------------------------------------------------
154StartDetectionWithDriveSelectByteInBHandStringInCX:
155    call    DetectPrint_StartDetectWithMasterOrSlaveStringInCXandIdeVarsInCSBP
156    call    HotkeyBar_UpdateDuringDriveDetection
157    ; Fall to .ReadAtaInfoFromHardDisk
158
159;--------------------------------------------------------------------
160; .ReadAtaInfoFromHardDisk
161;   Parameters:
162;       BH:     Drive Select byte for Drive and Head Register
163;       CS:BP:  Ptr to IDEVARS for the drive
164;       DS:     RAMVARS segment
165;       ES:     Zero (BDA segment)
166;   Returns:
167;       CF:     Cleared if ATA-information read successfully
168;               Set if any error
169;   Corrupts registers:
170;       AX, BL, CX, DX, SI, DI
171;--------------------------------------------------------------------
172.ReadAtaInfoFromHardDisk:
173    mov     si, BOOTVARS.rgbAtaInfo     ; ES:SI now points to ATA info location
174    push    es
175    push    si
176    push    bx
177    call    Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
178    pop     bx
179    pop     si
180    pop     es
181    jnc     SHORT CreateBiosTablesForHardDisk
182    ; Fall to .ReadAtapiInfoFromDrive
183
184.ReadAtapiInfoFromDrive:                ; Not yet implemented
185    ;call   ReadAtapiInfoFromDrive      ; Assume CD-ROM
186    ;jnc    SHORT _CreateBiosTablesForCDROM
187
188    ;jmp    short DetectDrives_DriveNotFound
189;;; fall-through instead of previous jmp instruction
190;--------------------------------------------------------------------
191; DetectDrives_DriveNotFound
192;   Parameters:
193;       Nothing
194;   Returns:
195;       CF:     Set (from BootMenuPrint_NullTerminatedStringFromCSSIandSetCF)
196;   Corrupts registers:
197;       AX, SI
198;--------------------------------------------------------------------
199DetectDrives_DriveNotFound:
200    mov     si, g_szNotFound
201    jmp     DetectPrint_NullTerminatedStringFromCSSIandSetCF
202
203
204;--------------------------------------------------------------------
205; CreateBiosTablesForHardDisk
206;   Parameters:
207;       BH:     Drive Select byte for Drive and Head Register
208;       CS:BP:  Ptr to IDEVARS for the drive
209;       ES:SI   Ptr to ATA information for the drive
210;       DS:     RAMVARS segment
211;       ES:     BDA/Bootnfo segment
212;   Returns:
213;       Nothing
214;   Corrupts registers:
215;       AX, BX, CX, DX, SI, DI
216;--------------------------------------------------------------------
217CreateBiosTablesForHardDisk:
218    call    CreateDPT_FromAtaInformation
219    jc      SHORT DetectDrives_DriveNotFound
220    call    BootMenuInfo_CreateForHardDisk
221    jmp     SHORT DetectPrint_DriveNameFromBootnfoInESBX
Note: See TracBrowser for help on using the repository browser.