1 | ; Project name : XTIDE Universal BIOS |
---|
2 | ; Description : Functions for detecting drive for the BIOS. |
---|
3 | |
---|
4 | ; Section containing code |
---|
5 | SECTION .text |
---|
6 | |
---|
7 | ;-------------------------------------------------------------------- |
---|
8 | ; Detects all IDE hard disks to be controlled by this BIOS. |
---|
9 | ; |
---|
10 | ; DetectDrives_FromAllIDEControllers |
---|
11 | ; Parameters: |
---|
12 | ; DS: RAMVARS segment |
---|
13 | ; ES: BDA segment (zero) |
---|
14 | ; Returns: |
---|
15 | ; Nothing |
---|
16 | ; Corrupts registers: |
---|
17 | ; All (not segments) |
---|
18 | ;-------------------------------------------------------------------- |
---|
19 | DetectDrives_FromAllIDEControllers: |
---|
20 | call RamVars_GetIdeControllerCountToCX |
---|
21 | mov bp, ROMVARS.ideVars0 ; CS:BP now points to first IDEVARS |
---|
22 | |
---|
23 | .DriveDetectLoop: ; Loop through IDEVARS |
---|
24 | push cx |
---|
25 | |
---|
26 | mov cx, g_szDetectMaster |
---|
27 | mov bh, MASK_DRVNHEAD_SET ; Select Master drive |
---|
28 | call StartDetectionWithDriveSelectByteInBHandStringInAX ; Detect and create DPT + BOOTNFO |
---|
29 | |
---|
30 | mov cx, g_szDetectSlave |
---|
31 | mov bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV |
---|
32 | call StartDetectionWithDriveSelectByteInBHandStringInAX |
---|
33 | |
---|
34 | pop cx |
---|
35 | |
---|
36 | add bp, BYTE IDEVARS_size ; Point to next IDEVARS |
---|
37 | |
---|
38 | %ifdef MODULE_SERIAL |
---|
39 | jcxz .done ; Set to zero on .ideVarsSerialAuto iteration (if any) |
---|
40 | %endif |
---|
41 | |
---|
42 | loop .DriveDetectLoop |
---|
43 | |
---|
44 | %ifdef MODULE_SERIAL |
---|
45 | ; |
---|
46 | ; if serial drive detected, do not scan (avoids duplicate drives and isn't needed - we already have a connection) |
---|
47 | ; |
---|
48 | call FindDPT_ToDSDIforSerialDevice |
---|
49 | jc .done |
---|
50 | |
---|
51 | mov bp, ROMVARS.ideVarsSerialAuto ; Point to our special IDEVARS sructure, just for serial scans |
---|
52 | |
---|
53 | mov al,[cs:ROMVARS.wFlags] ; Configurator set to always scan? |
---|
54 | or al,[es:BDA.bKBFlgs1] ; Or, did the user hold down the ALT key? |
---|
55 | and al,8 ; 8 = alt key depressed, same as FLG_ROMVARS_SERIAL_ALWAYSDETECT |
---|
56 | jnz .DriveDetectLoop |
---|
57 | %endif |
---|
58 | |
---|
59 | .done: |
---|
60 | ret |
---|
61 | |
---|
62 | %if FLG_ROMVARS_SERIAL_SCANDETECT != 8 |
---|
63 | %error "DetectDrives is currently coded to assume that FLG_ROMVARS_SERIAL_SCANDETECT is the same bit as the ALT key code in the BDA. Changes in the code will be needed if these values are no longer the same." |
---|
64 | %endif |
---|
65 | |
---|
66 | |
---|
67 | ;-------------------------------------------------------------------- |
---|
68 | ; StartDetectionWithDriveSelectByteInBHandStringInAX |
---|
69 | ; Parameters: |
---|
70 | ; BH: Drive Select byte for Drive and Head Register |
---|
71 | ; CX: Offset to "Master" or "Slave" string |
---|
72 | ; CS:BP: Ptr to IDEVARS for the drive |
---|
73 | ; DS: RAMVARS segment |
---|
74 | ; ES: Zero (BDA segment) |
---|
75 | ; Returns: |
---|
76 | ; None |
---|
77 | ; Corrupts registers: |
---|
78 | ; AX, BX, CX, DX, SI, DI |
---|
79 | ;-------------------------------------------------------------------- |
---|
80 | StartDetectionWithDriveSelectByteInBHandStringInAX: |
---|
81 | call DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP |
---|
82 | ; Fall to .ReadAtaInfoFromHardDisk |
---|
83 | |
---|
84 | ;-------------------------------------------------------------------- |
---|
85 | ; .ReadAtaInfoFromHardDisk |
---|
86 | ; Parameters: |
---|
87 | ; BH: Drive Select byte for Drive and Head Register |
---|
88 | ; CS:BP: Ptr to IDEVARS for the drive |
---|
89 | ; DS: RAMVARS segment |
---|
90 | ; ES: Zero (BDA segment) |
---|
91 | ; Returns: |
---|
92 | ; CF: Cleared if ATA-information read successfully |
---|
93 | ; Set if any error |
---|
94 | ; Corrupts registers: |
---|
95 | ; AX, BL, CX, DX, SI, DI |
---|
96 | ;-------------------------------------------------------------------- |
---|
97 | .ReadAtaInfoFromHardDisk: |
---|
98 | mov si, BOOTVARS.rgbAtaInfo ; ES:SI now points to ATA info location |
---|
99 | push es |
---|
100 | push si |
---|
101 | push bx |
---|
102 | call Device_IdentifyToBufferInESSIwithDriveSelectByteInBH |
---|
103 | pop bx |
---|
104 | pop si |
---|
105 | pop es |
---|
106 | jnc SHORT CreateBiosTablesForHardDisk |
---|
107 | ; Fall to .ReadAtapiInfoFromDrive |
---|
108 | |
---|
109 | .ReadAtapiInfoFromDrive: ; Not yet implemented |
---|
110 | ;call ReadAtapiInfoFromDrive ; Assume CD-ROM |
---|
111 | ;jnc SHORT _CreateBiosTablesForCDROM |
---|
112 | |
---|
113 | ;jmp short DetectDrives_DriveNotFound |
---|
114 | ;;; fall-through instead of previous jmp instruction |
---|
115 | ;-------------------------------------------------------------------- |
---|
116 | ; DetectDrives_DriveNotFound |
---|
117 | ; Parameters: |
---|
118 | ; Nothing |
---|
119 | ; Returns: |
---|
120 | ; CF: Set (from BootMenuPrint_NullTerminatedStringFromCSSIandSetCF) |
---|
121 | ; Corrupts registers: |
---|
122 | ; AX, SI |
---|
123 | ;-------------------------------------------------------------------- |
---|
124 | DetectDrives_DriveNotFound: |
---|
125 | mov si, g_szNotFound |
---|
126 | jmp BootMenuPrint_NullTerminatedStringFromCSSIandSetCF |
---|
127 | |
---|
128 | |
---|
129 | ;-------------------------------------------------------------------- |
---|
130 | ; CreateBiosTablesForHardDisk |
---|
131 | ; Parameters: |
---|
132 | ; BH: Drive Select byte for Drive and Head Register |
---|
133 | ; CS:BP: Ptr to IDEVARS for the drive |
---|
134 | ; ES:SI Ptr to ATA information for the drive |
---|
135 | ; DS: RAMVARS segment |
---|
136 | ; ES: BDA/Bootnfo segment |
---|
137 | ; Returns: |
---|
138 | ; Nothing |
---|
139 | ; Corrupts registers: |
---|
140 | ; AX, BX, CX, DX, SI, DI |
---|
141 | ;-------------------------------------------------------------------- |
---|
142 | CreateBiosTablesForHardDisk: |
---|
143 | call CreateDPT_FromAtaInformation |
---|
144 | jc SHORT DetectDrives_DriveNotFound |
---|
145 | call BootInfo_CreateForHardDisk |
---|
146 | jmp short DetectPrint_DriveNameFromBootnfoInESBX |
---|
147 | |
---|
148 | |
---|