source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/DetectDrives.asm@ 185

Last change on this file since 185 was 179, checked in by gregli@…, 13 years ago

Main checkin, adding virtual IDE drive over serial port connection

File size: 4.0 KB
RevLine 
[150]1; Project name : XTIDE Universal BIOS
[3]2; Description : Functions for detecting drive for the BIOS.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; Detects all IDE hard disks to be controlled by this BIOS.
9;
10; DetectDrives_FromAllIDEControllers
11; Parameters:
12; DS: RAMVARS segment
13; ES: BDA segment (zero)
14; Returns:
15; Nothing
16; Corrupts registers:
17; All (not segments)
18;--------------------------------------------------------------------
19DetectDrives_FromAllIDEControllers:
[33]20 call RamVars_GetIdeControllerCountToCX
[3]21 mov bp, ROMVARS.ideVars0 ; CS:BP now points to first IDEVARS
22.DriveDetectLoop:
[175]23 call .DetectDrives_WithIDEVARS ; Detect Master and Slave
[3]24 add bp, BYTE IDEVARS_size ; Point to next IDEVARS
25 loop .DriveDetectLoop
[175]26
27%ifdef MODULE_SERIAL
[179]28 test BYTE [es:BDA.bKBFlgs1], 8 ; alt key depressed
29 jz .done
30 mov bp, ROMVARS.ideVarsSerialAuto
[175]31;;; fall-through
32%else
[3]33 ret
[175]34%endif
[3]35
36;--------------------------------------------------------------------
37; Detects IDE hard disks by using information from IDEVARS.
38;
39; DetectDrives_WithIDEVARS
40; Parameters:
41; CS:BP: Ptr to IDEVARS
42; DS: RAMVARS segment
43; ES: Zero (BDA segment)
44; Returns:
45; Nothing
46; Corrupts registers:
47; AX, BX, DX, SI, DI
48;--------------------------------------------------------------------
[175]49.DetectDrives_WithIDEVARS:
[3]50 push cx
[97]51 mov ax, g_szMaster
[150]52 mov bh, MASK_DRVNHEAD_SET ; Select Master drive
[98]53 call StartDetectionWithDriveSelectByteInBHandStringInAX ; Detect and create DPT + BOOTNFO
[3]54
[97]55 mov ax, g_szSlave
[150]56 mov bh, MASK_DRVNHEAD_SET | FLG_DRVNHEAD_DRV
[98]57 call StartDetectionWithDriveSelectByteInBHandStringInAX
[3]58 pop cx
[175]59.done:
[3]60 ret
61
[175]62
[3]63;--------------------------------------------------------------------
[98]64; StartDetectionWithDriveSelectByteInBHandStringInAX
[3]65; Parameters:
[98]66; AX: Offset to "Master" or "Slave" string
[3]67; BH: Drive Select byte for Drive and Head Register
68; CS:BP: Ptr to IDEVARS for the drive
69; DS: RAMVARS segment
70; ES: Zero (BDA segment)
71; Returns:
[98]72; Nothing
[3]73; Corrupts registers:
[98]74; AX, BX, CX, DX, SI, DI
[3]75;--------------------------------------------------------------------
[98]76StartDetectionWithDriveSelectByteInBHandStringInAX:
77 call DetectPrint_StartDetectWithMasterOrSlaveStringInAXandIdeVarsInCSBP
[120]78 ; Fall to .ReadAtaInfoFromHardDisk
[3]79
80;--------------------------------------------------------------------
[120]81; .ReadAtaInfoFromHardDisk
[3]82; Parameters:
83; BH: Drive Select byte for Drive and Head Register
84; CS:BP: Ptr to IDEVARS for the drive
85; DS: RAMVARS segment
86; ES: Zero (BDA segment)
87; Returns:
88; CF: Cleared if ATA-information read successfully
89; Set if any error
90; Corrupts registers:
[150]91; AX, BL, CX, DX, SI, DI
[3]92;--------------------------------------------------------------------
[120]93.ReadAtaInfoFromHardDisk:
[150]94 mov si, BOOTVARS.rgbAtaInfo ; ES:SI now points to ATA info location
95 push es
96 push si
97 push bx
98 call Device_IdentifyToBufferInESSIwithDriveSelectByteInBH
99 pop bx
100 pop si
101 pop es
[120]102 jnc SHORT CreateBiosTablesForHardDisk
103 ; Fall to .ReadAtapiInfoFromDrive
[3]104
[120]105.ReadAtapiInfoFromDrive: ; Not yet implemented
106 ;call ReadAtapiInfoFromDrive ; Assume CD-ROM
107 ;jnc SHORT _CreateBiosTablesForCDROM
108 jmp DetectPrint_DriveNotFound
[3]109
[120]110
[3]111;--------------------------------------------------------------------
[98]112; CreateBiosTablesForHardDisk
[3]113; Parameters:
114; BH: Drive Select byte for Drive and Head Register
115; CS:BP: Ptr to IDEVARS for the drive
[150]116; ES:SI Ptr to ATA information for the drive
[3]117; DS: RAMVARS segment
[98]118; ES: BDA/Bootnfo segment
[3]119; Returns:
[98]120; Nothing
[3]121; Corrupts registers:
[98]122; AX, BX, CX, DX, SI, DI
[3]123;--------------------------------------------------------------------
[98]124CreateBiosTablesForHardDisk:
[3]125 call CreateDPT_FromAtaInformation
126 jc SHORT .InvalidAtaInfo
127 call BootInfo_CreateForHardDisk
[98]128 jmp DetectPrint_DriveNameFromBootnfoInESBX
[3]129.InvalidAtaInfo:
[98]130 jmp DetectPrint_DriveNotFound
Note: See TracBrowser for help on using the repository browser.