source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/AtaID.asm @ 421

Last change on this file since 421 was 421, checked in by aitotat@…, 12 years ago

Changes to XTIDE Universal BIOS:

  • Addressing modes are now NORMAL, LARGE and LBA.
  • L-CHS parameters are now generated differently for drives with 8192 or less cylinders.
File size: 3.9 KB
Line 
1; Project name  :   XTIDE Universal BIOS
2; Description   :   Functions for accessing ATA information read with
3;                   IDENTIFY DEVICE command.
4
5;
6; XTIDE Universal BIOS and Associated Tools 
7; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
8;
9; This program is free software; you can redistribute it and/or modify
10; it under the terms of the GNU General Public License as published by
11; the Free Software Foundation; either version 2 of the License, or
12; (at your option) any later version.
13; 
14; This program is distributed in the hope that it will be useful,
15; but WITHOUT ANY WARRANTY; without even the implied warranty of
16; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17; GNU General Public License for more details.     
18; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
19;       
20
21; Section containing code
22SECTION .text
23
24%ifdef MODULE_ADVANCED_ATA
25;--------------------------------------------------------------------
26; AtaID_GetMaxPioModeToAXandMinCycleTimeToCX
27;   Parameters:
28;       ES:SI:  Ptr to 512-byte ATA information read from the drive
29;   Returns:
30;       AL:     Max supported PIO mode
31;       AH:     FLGH_DPT_IORDY if IORDY supported, zero otherwise
32;       CX:     Minimum Cycle Time in nanosecs
33;   Corrupts registers:
34;       BX
35;--------------------------------------------------------------------
36AtaID_GetMaxPioModeToAXandMinCycleTimeToCX:
37    ; Get PIO mode and cycle time for PIO 0...2
38    mov     bx, [es:si+ATA1.bPioMode]
39    mov     ax, bx                  ; AH = 0, AL = PIO mode 0, 1 or 2
40    shl     bx, 1                   ; Shift for WORD lookup
41    mov     cx, [cs:bx+.rgwPio0to2CycleTimeInNanosecs]
42
43    ; Check if IORDY is supported
44    test    BYTE [es:si+ATA2.wCaps+1], A2_wCaps_IORDY >> 8
45    jz      SHORT .ReturnPioTimings ; No PIO 3 or higher if no IORDY
46    mov     ah, FLGH_DPT_IORDY
47
48    ; Check if Advanced PIO modes are supported (3 and above)
49    test    BYTE [es:si+ATA2.wFields], A2_wFields_64to70
50    jz      SHORT .ReturnPioTimings
51
52    ; Get Advanced PIO mode
53    ; (Hard Disks supports up to 4 but CF cards can support 5 and 6)
54    mov     bl, [es:si+ATA2.bPIOSupp]
55.CheckNextFlag:
56    inc     ax
57    shr     bl, 1
58    jnz     SHORT .CheckNextFlag
59    MIN_U   al, 6                       ; Make sure not above lookup tables
60    mov     cx, [es:si+ATA2.wPIOMinCyF] ; Advanced modes use IORDY
61.ReturnPioTimings:
62    ret
63
64.rgwPio0to2CycleTimeInNanosecs:
65    dw      PIO_0_MIN_CYCLE_TIME_NS
66    dw      PIO_1_MIN_CYCLE_TIME_NS
67    dw      PIO_2_MIN_CYCLE_TIME_NS
68
69
70;--------------------------------------------------------------------
71; AtaID_GetRecoveryTimeToAXfromPioModeInBXandCycleTimeInCX
72;   Parameters:
73;       BX:     PIO Mode
74;       CX:     PIO Cycle Time in nanosecs
75;   Returns:
76;       AX:     Active Time in nanosecs
77;   Corrupts registers:
78;       BX, CX
79;--------------------------------------------------------------------
80AtaID_GetRecoveryTimeToAXfromPioModeInBXandCycleTimeInCX:
81    call    AtaID_GetActiveTimeToAXfromPioModeInBX
82    mov     bl, [cs:bx+.rgbPioModeToAddressValidTimeNs]
83    sub     cx, bx  ; Cycle Time (t0) - Address Valid Time (t1)
84    sub     cx, ax  ; - Active Time (t2)
85    xchg    ax, cx  ; AX = Recovery Time (t2i)
86    ret
87
88.rgbPioModeToAddressValidTimeNs:
89    db      PIO_0_MIN_ADDRESS_VALID_NS
90    db      PIO_1_MIN_ADDRESS_VALID_NS
91    db      PIO_2_MIN_ADDRESS_VALID_NS
92    db      PIO_3_MIN_ADDRESS_VALID_NS
93    db      PIO_4_MIN_ADDRESS_VALID_NS
94    db      PIO_5_MIN_ADDRESS_VALID_NS
95    db      PIO_6_MIN_ADDRESS_VALID_NS
96
97
98;--------------------------------------------------------------------
99; AtaID_GetActiveTimeToAXfromPioModeInBX
100;   Parameters:
101;       BX:     PIO Mode
102;   Returns:
103;       AX:     Active Time in nanosecs
104;   Corrupts registers:
105;       Nothing
106;--------------------------------------------------------------------
107AtaID_GetActiveTimeToAXfromPioModeInBX:
108    shl     bx, 1
109    mov     ax, [cs:bx+.rgwPioModeToActiveTimeNs]
110    shr     bx, 1
111    ret
112
113.rgwPioModeToActiveTimeNs:
114    dw      PIO_0_MIN_ACTIVE_TIME_NS
115    dw      PIO_1_MIN_ACTIVE_TIME_NS
116    dw      PIO_2_MIN_ACTIVE_TIME_NS
117    dw      PIO_3_MIN_ACTIVE_TIME_NS
118    dw      PIO_4_MIN_ACTIVE_TIME_NS
119    dw      PIO_5_MIN_ACTIVE_TIME_NS
120    dw      PIO_6_MIN_ACTIVE_TIME_NS
121
122%endif ; MODULE_ADVANCED_ATA
Note: See TracBrowser for help on using the repository browser.