source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/AtaID.asm @ 534

; Project name  :   XTIDE Universal BIOS
; Description   :   Functions for accessing ATA information read with
;                   IDENTIFY DEVICE command.

;
; XTIDE Universal BIOS and Associated Tools
; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team.
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
;
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.
; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
;

; Section containing code
SECTION .text

;--------------------------------------------------------------------
; AtaID_VerifyFromESSI
;   Parameters:
;       ES:SI:  Ptr to 512-byte ATA information read from the drive
;   Returns:
;       CF:     Set if failed to verify ATA-ID
;               Cleared if ATA-ID verified successfully
;   Corrupts registers:
;       AX, BX, CX
;--------------------------------------------------------------------
AtaID_VerifyFromESSI:
    ; We cannot start by reading ATA version since the ID might be
    ; corrupted. We start by making sure P-CHS values are valid.
    ; If they are, we assume the ATA ID to be valid. Fortunately we can do
    ; further checking for ATA-5 and later since they contain signature and
    ; checksum bytes. Those are not available for ATA-4 and older.

    ; Verify P-CHS cylinders
    mov     bx, ATA1.wCylCnt
    mov     cx, MAX_VALID_PCHS_CYLINDERS
    call    .CompareCHorSfromOffsetBXtoMaxValueInCX

    mov     bl, ATA1.wHeadCnt & 0FFh
    mov     cx, MAX_VALID_PCHS_HEADS
    call    .CompareCHorSfromOffsetBXtoMaxValueInCX

    mov     bl, ATA1.wSPT & 0FFh
    mov     cl, MAX_VALID_PCHS_SECTORS_PER_TRACK
    call    .CompareCHorSfromOffsetBXtoMaxValueInCX

    ; Check signature byte. It is only found on ATA-5 and later. It should be zero on
    ; ATA-4 and older.
    mov     al, [es:si+ATA6.bSignature]
    test    al, al
    jz      SHORT .AtaIDverifiedSuccessfully    ; Old ATA so Signature and Checksum is not available
    cmp     al, A6_wIntegrity_SIGNATURE
    jne     SHORT .FailedToVerifyAtaID

    ; Check checksum byte since signature was present
    mov     cx, ATA6_size
    call    Memory_SumCXbytesFromESSItoAL       ; Returns with ZF set according to result
    jnz     SHORT .FailedToVerifyAtaID

    ; ATA-ID is now verified to be valid
.AtaIDverifiedSuccessfully:
    clc
    ret

;--------------------------------------------------------------------
; .CompareCHorSfromOffsetBXtoMaxValueInCX
;   Parameters:
;       BX:     C, H or S offset to ATA-ID
;       CX:     Maximum valid C, H or S value
;       ES:SI:  Ptr to 512-byte ATA information read from the drive
;   Returns:
;       Exits from AtaID_VerifyFromESSI with CF set if invalid value
;   Corrupts registers:
;       AX
;--------------------------------------------------------------------
.CompareCHorSfromOffsetBXtoMaxValueInCX:
    mov     ax, [es:bx+si]
    test    ax, ax
    jz      SHORT .InvalidPCHorSinOffsetBX
    cmp     ax, cx          ; Compare to max valid value
    jbe     SHORT .ValidPCHorSinOffsetBX
.InvalidPCHorSinOffsetBX:
    add     sp, BYTE 2      ; Clear return address for this function
.FailedToVerifyAtaID:
    stc                     ; Set carry to indicate invalid ATA-ID
.ValidPCHorSinOffsetBX:
    ret


%ifdef MODULE_ADVANCED_ATA
;--------------------------------------------------------------------
; AtaID_GetMaxPioModeToAXandMinCycleTimeToCX
;   Parameters:
;       ES:SI:  Ptr to 512-byte ATA information read from the drive
;   Returns:
;       AL:     Max supported PIO mode
;       AH:     FLGH_DPT_IORDY if IORDY supported, zero otherwise
;       CX:     Minimum Cycle Time in nanosecs
;   Corrupts registers:
;       BX
;--------------------------------------------------------------------
AtaID_GetMaxPioModeToAXandMinCycleTimeToCX:
    ; Get PIO mode and cycle time for PIO 0...2
    mov     bx, [es:si+ATA1.bPioMode]
    mov     ax, bx                  ; AH = 0, AL = PIO mode 0, 1 or 2
    eSHL_IM bx, 1                   ; Shift for WORD lookup
    mov     cx, [cs:bx+.rgwPio0to2CycleTimeInNanosecs]

    ; Check if IORDY is supported
    test    BYTE [es:si+ATA2.wCaps+1], A2_wCaps_IORDY >> 8
    jz      SHORT .ReturnPioTimings ; No PIO 3 or higher if no IORDY
    mov     ah, FLGH_DPT_IORDY

    ; Check if Advanced PIO modes are supported (3 and above)
    test    BYTE [es:si+ATA2.wFields], A2_wFields_64to70
    jz      SHORT .ReturnPioTimings

    ; Get Advanced PIO mode
    ; (Hard Disks supports up to 4 but CF cards can support 5 and 6)
    mov     bl, [es:si+ATA2.bPIOSupp]
.CheckNextFlag:
    inc     ax
    shr     bl, 1
    jnz     SHORT .CheckNextFlag
    MIN_U   al, 6                       ; Make sure not above lookup tables
    mov     cx, [es:si+ATA2.wPIOMinCyF] ; Advanced modes use IORDY
.ReturnPioTimings:
    ret

.rgwPio0to2CycleTimeInNanosecs:
    dw      PIO_0_MIN_CYCLE_TIME_NS
    dw      PIO_1_MIN_CYCLE_TIME_NS
    dw      PIO_2_MIN_CYCLE_TIME_NS


;--------------------------------------------------------------------
; AtaID_GetRecoveryTimeToAXfromPioModeInBXandCycleTimeInCX
;   Parameters:
;       BX:     PIO Mode
;       CX:     PIO Cycle Time in nanosecs
;   Returns:
;       AX:     Active Time in nanosecs
;   Corrupts registers:
;       BX, CX
;--------------------------------------------------------------------
AtaID_GetRecoveryTimeToAXfromPioModeInBXandCycleTimeInCX:
    call    AtaID_GetActiveTimeToAXfromPioModeInBX
    mov     bl, [cs:bx+.rgbPioModeToAddressValidTimeNs]
    sub     cx, bx  ; Cycle Time (t0) - Address Valid Time (t1)
    sub     cx, ax  ; - Active Time (t2)
    xchg    ax, cx  ; AX = Recovery Time (t2i)
    ret

.rgbPioModeToAddressValidTimeNs:
    db      PIO_0_MIN_ADDRESS_VALID_NS
    db      PIO_1_MIN_ADDRESS_VALID_NS
    db      PIO_2_MIN_ADDRESS_VALID_NS
    db      PIO_3_MIN_ADDRESS_VALID_NS
    db      PIO_4_MIN_ADDRESS_VALID_NS
    db      PIO_5_MIN_ADDRESS_VALID_NS
    db      PIO_6_MIN_ADDRESS_VALID_NS


;--------------------------------------------------------------------
; AtaID_GetActiveTimeToAXfromPioModeInBX
;   Parameters:
;       BX:     PIO Mode
;   Returns:
;       AX:     Active Time in nanosecs
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
AtaID_GetActiveTimeToAXfromPioModeInBX:
    eMOVZX  ax, [cs:bx+.rgbPioModeToActiveTimeNs]
    ret

.rgbPioModeToActiveTimeNs:
    db      PIO_0_MIN_ACTIVE_TIME_NS
    db      PIO_1_MIN_ACTIVE_TIME_NS
    db      PIO_2_MIN_ACTIVE_TIME_NS
    db      PIO_3_MIN_ACTIVE_TIME_NS
    db      PIO_4_MIN_ACTIVE_TIME_NS
    db      PIO_5_MIN_ACTIVE_TIME_NS
    db      PIO_6_MIN_ACTIVE_TIME_NS

%endif ; MODULE_ADVANCED_ATA