source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/AtaID.asm@ 437

; Project name  :   XTIDE Universal BIOS
; Description   :   Functions for accessing ATA information read with
;                   IDENTIFY DEVICE command.

;
; XTIDE Universal BIOS and Associated Tools 
; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
;
; This program is free software; you can redistribute it and/or modify
; it under the terms of the GNU General Public License as published by
; the Free Software Foundation; either version 2 of the License, or
; (at your option) any later version.
; 
; This program is distributed in the hope that it will be useful,
; but WITHOUT ANY WARRANTY; without even the implied warranty of
; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
; GNU General Public License for more details.      
; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
;       

; Section containing code
SECTION .text

%ifdef MODULE_ADVANCED_ATA
;--------------------------------------------------------------------
; AtaID_GetMaxPioModeToAXandMinCycleTimeToCX
;   Parameters:
;       ES:SI:  Ptr to 512-byte ATA information read from the drive
;   Returns:
;       AL:     Max supported PIO mode
;       AH:     FLGH_DPT_IORDY if IORDY supported, zero otherwise
;       CX:     Minimum Cycle Time in nanosecs
;   Corrupts registers:
;       BX
;--------------------------------------------------------------------
AtaID_GetMaxPioModeToAXandMinCycleTimeToCX:
    ; Get PIO mode and cycle time for PIO 0...2
    mov     bx, [es:si+ATA1.bPioMode]
    mov     ax, bx                  ; AH = 0, AL = PIO mode 0, 1 or 2
    shl     bx, 1                   ; Shift for WORD lookup
    mov     cx, [cs:bx+.rgwPio0to2CycleTimeInNanosecs]

    ; Check if IORDY is supported
    test    BYTE [es:si+ATA2.wCaps+1], A2_wCaps_IORDY >> 8
    jz      SHORT .ReturnPioTimings ; No PIO 3 or higher if no IORDY
    mov     ah, FLGH_DPT_IORDY

    ; Check if Advanced PIO modes are supported (3 and above)
    test    BYTE [es:si+ATA2.wFields], A2_wFields_64to70
    jz      SHORT .ReturnPioTimings

    ; Get Advanced PIO mode
    ; (Hard Disks supports up to 4 but CF cards can support 5 and 6)
    mov     bl, [es:si+ATA2.bPIOSupp]
.CheckNextFlag:
    inc     ax
    shr     bl, 1
    jnz     SHORT .CheckNextFlag
    MIN_U   al, 6                       ; Make sure not above lookup tables
    mov     cx, [es:si+ATA2.wPIOMinCyF] ; Advanced modes use IORDY
.ReturnPioTimings:
    ret

.rgwPio0to2CycleTimeInNanosecs:
    dw      PIO_0_MIN_CYCLE_TIME_NS
    dw      PIO_1_MIN_CYCLE_TIME_NS
    dw      PIO_2_MIN_CYCLE_TIME_NS


;--------------------------------------------------------------------
; AtaID_GetRecoveryTimeToAXfromPioModeInBXandCycleTimeInCX
;   Parameters:
;       BX:     PIO Mode
;       CX:     PIO Cycle Time in nanosecs
;   Returns:
;       AX:     Active Time in nanosecs
;   Corrupts registers:
;       BX, CX
;--------------------------------------------------------------------
AtaID_GetRecoveryTimeToAXfromPioModeInBXandCycleTimeInCX:
    call    AtaID_GetActiveTimeToAXfromPioModeInBX
    mov     bl, [cs:bx+.rgbPioModeToAddressValidTimeNs]
    sub     cx, bx  ; Cycle Time (t0) - Address Valid Time (t1)
    sub     cx, ax  ; - Active Time (t2)
    xchg    ax, cx  ; AX = Recovery Time (t2i)
    ret

.rgbPioModeToAddressValidTimeNs:
    db      PIO_0_MIN_ADDRESS_VALID_NS
    db      PIO_1_MIN_ADDRESS_VALID_NS
    db      PIO_2_MIN_ADDRESS_VALID_NS
    db      PIO_3_MIN_ADDRESS_VALID_NS
    db      PIO_4_MIN_ADDRESS_VALID_NS
    db      PIO_5_MIN_ADDRESS_VALID_NS
    db      PIO_6_MIN_ADDRESS_VALID_NS


;--------------------------------------------------------------------
; AtaID_GetActiveTimeToAXfromPioModeInBX
;   Parameters:
;       BX:     PIO Mode
;   Returns:
;       AX:     Active Time in nanosecs
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
AtaID_GetActiveTimeToAXfromPioModeInBX:
    shl     bx, 1
    mov     ax, [cs:bx+.rgwPioModeToActiveTimeNs]
    shr     bx, 1
    ret

.rgwPioModeToActiveTimeNs:
    dw      PIO_0_MIN_ACTIVE_TIME_NS
    dw      PIO_1_MIN_ACTIVE_TIME_NS
    dw      PIO_2_MIN_ACTIVE_TIME_NS
    dw      PIO_3_MIN_ACTIVE_TIME_NS
    dw      PIO_4_MIN_ACTIVE_TIME_NS
    dw      PIO_5_MIN_ACTIVE_TIME_NS
    dw      PIO_6_MIN_ACTIVE_TIME_NS

%endif ; MODULE_ADVANCED_ATA