source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Initialization/AtaID.asm@ 225

; Project name  :   XTIDE Universal BIOS
; Description   :   Functions for accessing ATA information read with
;                   IDENTIFY DEVICE command.

; Section containing code
SECTION .text

;--------------------------------------------------------------------
; LBA assist calculation:
; this is how to fit a big drive into INT13's skimpy size requirements,
; with a maximum of 8.4G available.
;
; total LBAs (as obtained by words 60+61)
; divided by 63 (sectors per track) (save as value A)
; Sub 1 from A
; divide A by 1024 + truncate.
; == total number of heads to use.
; add 1
; this value must be either 16, 32, 64, 128, or 256 (round up)
; then take the value A above and divide by # of heads
; to get the # of cylinders to use.
;
;
; so a LBA28 drive will have 268,435,456 as maximum LBAs
;
; 10000000h / 63   = 410410h (total cylinders or tracks)
;   410410h / 1024 = 1041h, which is way more than 256 heads, but 256 is max.
;   410410h / 256  = 4104h cylinders
;
; there's a wealth of information at: http://www.mossywell.com/boot-sequence
; they show a slightly different approach to LBA assist calulations, but
; the method here provides compatibility with phoenix BIOS
;
; we're using the values from 60+61 here because we're topping out at 8.4G
; anyway, so there's no need to use the 48bit LBA values.
;
; AtaID_GetLbaAssistedCHStoDXAXBLBH:
;   Parameters:
;       BX:DX:AX:   Total number of sectors
;   Returns:
;       DX:AX:  Number of cylinders
;       BH:     Number of sectors per track (always 63)
;       BL:     Number of heads (16, 32, 64, 128 or 255)
;   Corrupts registers:
;       CX
;--------------------------------------------------------------------
AtaID_GetLbaAssistedCHStoDXAXBLBH:
    push    bp
    push    si

    ; Value A = Total sector count / 63
    xor     cx, cx
    push    cx      ; Push zero for bits 48...63
    push    bx
    push    dx
    push    ax                      ; 64-bit sector count now in stack
    mov     cl, LBA_ASSIST_SPT
    mov     bp, sp                  ; SS:BP now points sector count
    call    Math_DivQWatSSBPbyCX    ; Temporary value A now in stack

    ; BX = Number of heads =  A / 1024
    mov     ax, [bp]
    mov     dx, [bp+2]
    mov     bx, [bp+4]
    call    Size_DivideSizeInBXDXAXby1024andIncrementMagnitudeInCX

    ; Heads must be 16, 32, 64, 128 or 256 (round up)
    mov     bx, 256                     ; Max number of heads
    test    dx, dx                      ; 65536 or more heads?
    jnz     SHORT .GetNumberOfCylinders
    mov     cx, 128                     ; Half BX for rounding up
.FindMostSignificantBitForHeadSize:
    cmp     ax, cx
    jae     SHORT .GetNumberOfCylinders
    shr     cx, 1
    shr     bx, 1                       ; Halve number of heads
    jmp     SHORT .FindMostSignificantBitForHeadSize

    ; DX:AX = Number of cylinders = A / number of heads
.GetNumberOfCylinders:
    mov     cx, bx
    call    Math_DivQWatSSBPbyCX
    mov     ax, [bp]
    mov     dx, [bp+2]                  ; Cylinders now in DX:AX

    ; Return LBA assisted CHS
    add     sp, BYTE 8                  ; Clean stack
    sub     bl, bh                      ; Limit heads to 255
    mov     bh, LBA_ASSIST_SPT
    pop     si
    pop     bp
    ret


;--------------------------------------------------------------------
; AtaID_GetPCHStoAXBLBHfromAtaInfoInESSI
;   Parameters:
;       ES:SI:  Ptr to 512-byte ATA information read from the drive
;   Returns:
;       AX:     Number of user specified P-CHS cylinders
;       BH:     Number of user specified P-CHS sectors per track
;       BL:     Number of user specified P-CHS heads
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
AtaID_GetPCHStoAXBLBHfromAtaInfoInESSI:
    mov     ax, [es:si+ATA1.wCylCnt]    ; Cylinders (1...16383)
    mov     bl, [es:si+ATA1.wHeadCnt]   ; Heads (1...16)
    mov     bh, [es:si+ATA1.wSPT]       ; Sectors per Track (1...63)
    ret


;--------------------------------------------------------------------
; AtaID_GetTotalSectorCountToBXDXAXfromAtaInfoInESSI
;   Parameters:
;       ES:SI:  Ptr to 512-byte ATA information read from the drive
;   Returns:
;       BX:DX:AX:   48-bit sector count
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
AtaID_GetTotalSectorCountToBXDXAXfromAtaInfoInESSI:
    mov     bx, Registers_ExchangeDSSIwithESDI
    call    bx  ; ATA info now in DS:DI
    push    bx  ; We will return via Registers_ExchangeDSSIwithESDI
    xor     bx, bx
    test    BYTE [di+ATA1.wCaps+1], A1_wCaps_LBA>>8
    jz      SHORT .GetChsSectorCount
    ; Fall to .GetLbaSectorCount

;--------------------------------------------------------------------
; .GetLbaSectorCount
; .GetLba28SectorCount
; .GetChsSectorCount
;   Parameters:
;       BX:     Zero
;       DS:DI:  Ptr to 512-byte ATA information read from the drive
;   Returns:
;       BX:DX:AX:   48-bit sector count
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
.GetLbaSectorCount:
    test    BYTE [di+ATA6.wSetSup83+1], A6_wSetSup83_LBA48>>8
    jz      SHORT .GetLba28SectorCount
    mov     ax, [di+ATA6.qwLBACnt]
    mov     dx, [di+ATA6.qwLBACnt+2]
    mov     bx, [di+ATA6.qwLBACnt+4]
    ret

.GetLba28SectorCount:
    mov     ax, [di+ATA1.dwLBACnt]
    mov     dx, [di+ATA1.dwLBACnt+2]
    ret

.GetChsSectorCount:
    mov     al, [di+ATA1.wSPT]      ; AL=Sectors per track
    mul     BYTE [di+ATA1.wHeadCnt] ; AX=Sectors per track * number of heads
    mul     WORD [di+ATA1.wCylCnt]  ; DX:AX=Sectors per track * number of heads * number of cylinders
    ret