[218] | 1 | ; Project name : XTIDE Universal BIOS |
---|
| 2 | ; Description : Functions for preparing data buffer for transfer. |
---|
| 3 | |
---|
[376] | 4 | ; |
---|
[445] | 5 | ; XTIDE Universal BIOS and Associated Tools |
---|
[526] | 6 | ; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2013 by XTIDE Universal BIOS Team. |
---|
[376] | 7 | ; |
---|
| 8 | ; This program is free software; you can redistribute it and/or modify |
---|
| 9 | ; it under the terms of the GNU General Public License as published by |
---|
| 10 | ; the Free Software Foundation; either version 2 of the License, or |
---|
| 11 | ; (at your option) any later version. |
---|
[445] | 12 | ; |
---|
[376] | 13 | ; This program is distributed in the hope that it will be useful, |
---|
| 14 | ; but WITHOUT ANY WARRANTY; without even the implied warranty of |
---|
| 15 | ; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
---|
| 16 | ; GNU General Public License for more details. |
---|
[445] | 17 | ; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html |
---|
| 18 | ; |
---|
[376] | 19 | |
---|
[218] | 20 | ; Section containing code |
---|
| 21 | SECTION .text |
---|
| 22 | |
---|
[221] | 23 | ;-------------------------------------------------------------------- |
---|
| 24 | ; Prepare_ByLoadingDapToESSIandVerifyingForTransfer |
---|
| 25 | ; Parameters: |
---|
| 26 | ; SI: Offset to DAP |
---|
| 27 | ; DS:DI: Ptr to DPT |
---|
| 28 | ; SS:BP: Ptr to IDEPACK |
---|
| 29 | ; Parameters on INTPACK: |
---|
| 30 | ; DS:SI: Ptr to Disk Address Packet |
---|
| 31 | ; Returns: |
---|
| 32 | ; BX: Index to command lookup table |
---|
| 33 | ; ES:SI: Ptr to Disk Address Packet (DAP) |
---|
| 34 | ; Exits from INT 13h if invalid DAP |
---|
| 35 | ; Corrupts registers: |
---|
| 36 | ; AX, DX |
---|
| 37 | ;-------------------------------------------------------------------- |
---|
| 38 | %ifdef MODULE_EBIOS |
---|
| 39 | ALIGN JUMP_ALIGN |
---|
| 40 | Prepare_ByLoadingDapToESSIandVerifyingForTransfer: |
---|
| 41 | ; Load pointer to DAP to ES:SI and make sure it is valid |
---|
| 42 | mov es, [bp+IDEPACK.intpack+INTPACK.ds] ; ES:SI to point Disk Address Packet |
---|
| 43 | cmp BYTE [es:si+DAP.bSize], MINIMUM_DAP_SIZE |
---|
| 44 | jb SHORT InvalidDAP |
---|
| 45 | |
---|
| 46 | ; Make sure that sector count is valid |
---|
[558] | 47 | %ifdef USE_UNDOC_INTEL |
---|
| 48 | eSALC ; Clear AL using CF (CF is cleared since JB above fell through) |
---|
| 49 | or al, [es:si+DAP.wSectorCount] |
---|
| 50 | %else |
---|
[547] | 51 | mov al, [es:si+DAP.wSectorCount] |
---|
| 52 | test al, al |
---|
[558] | 53 | %endif |
---|
[547] | 54 | jz SHORT ZeroSectorsRequestedSoNoErrors |
---|
| 55 | js SHORT InvalidNumberOfSectorsRequested |
---|
| 56 | |
---|
| 57 | %if 0 ; Slow version in the unlikely case that high byte needs to be checked. |
---|
[221] | 58 | mov ax, [es:si+DAP.wSectorCount] |
---|
| 59 | test ax, ax |
---|
| 60 | jz SHORT ZeroSectorsRequestedSoNoErrors |
---|
| 61 | cmp ax, BYTE 127 |
---|
| 62 | ja SHORT InvalidNumberOfSectorsRequested |
---|
[547] | 63 | %endif |
---|
[221] | 64 | |
---|
[294] | 65 | ; Get EBIOS command index to BX |
---|
[221] | 66 | ; LBA28 or LBA48 command |
---|
| 67 | call Prepare_GetOldInt13hCommandIndexToBX |
---|
[421] | 68 | mov al, [di+DPT.bFlagsLow] |
---|
[558] | 69 | eSHL_IM al, 1 ; Set CF if LBA48 supported |
---|
[421] | 70 | adc bl, bh ; LBA48 EXT commands |
---|
[221] | 71 | ret |
---|
[421] | 72 | %endif ; MODULE_EBIOS |
---|
[221] | 73 | |
---|
| 74 | |
---|
| 75 | ;-------------------------------------------------------------------- |
---|
| 76 | ; Prepare_GetOldInt13hCommandIndexToBX |
---|
| 77 | ; Parameters: |
---|
| 78 | ; DS:DI: Ptr to DPT |
---|
| 79 | ; Returns: |
---|
| 80 | ; BX: Index to command lookup table |
---|
| 81 | ; Corrupts registers: |
---|
| 82 | ; Nothing |
---|
| 83 | ;-------------------------------------------------------------------- |
---|
| 84 | ALIGN JUMP_ALIGN |
---|
| 85 | Prepare_GetOldInt13hCommandIndexToBX: |
---|
| 86 | ; Block mode or single sector |
---|
| 87 | mov bl, [di+DPT.bFlagsHigh] |
---|
[550] | 88 | and bx, BYTE FLGH_DPT_USE_BLOCK_MODE_COMMANDS ; Bit 1 |
---|
[221] | 89 | ret |
---|
| 90 | |
---|
| 91 | |
---|
[218] | 92 | ;--------------------------------------------------------------------- |
---|
[221] | 93 | ; Prepare_BufferToESSIforOldInt13hTransfer |
---|
[218] | 94 | ; Parameters: |
---|
| 95 | ; AL: Number of sectors to transfer |
---|
[474] | 96 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
[218] | 97 | ; SS:BP: Ptr to IDEPACK |
---|
| 98 | ; Parameters on INTPACK: |
---|
| 99 | ; ES:BX: Ptr to data buffer |
---|
| 100 | ; Returns: |
---|
| 101 | ; ES:SI: Ptr to normalized data buffer |
---|
| 102 | ; Exits INT 13h if error |
---|
| 103 | ; Corrupts registers: |
---|
| 104 | ; BX |
---|
| 105 | ;-------------------------------------------------------------------- |
---|
| 106 | ALIGN JUMP_ALIGN |
---|
[221] | 107 | Prepare_BufferToESSIforOldInt13hTransfer: |
---|
[477] | 108 | mov si, [bp+IDEPACK.intpack+INTPACK.bx] ; Load offset |
---|
[480] | 109 | mov es, [bp+IDEPACK.intpack+INTPACK.es] ; Load segment |
---|
[221] | 110 | ; Fall to Prepare_ByValidatingSectorsInALforOldInt13h |
---|
[218] | 111 | |
---|
[221] | 112 | ;--------------------------------------------------------------------- |
---|
| 113 | ; Prepare_ByValidatingSectorsInALforOldInt13h |
---|
| 114 | ; Parameters: |
---|
[567] | 115 | ; AL: Number of sectors to transfer (1...128 is valid) |
---|
[221] | 116 | ; Returns: |
---|
| 117 | ; Exits INT 13h if invalid number of sectors in AL |
---|
| 118 | ; Corrupts registers: |
---|
| 119 | ; Nothing |
---|
| 120 | ;-------------------------------------------------------------------- |
---|
| 121 | Prepare_ByValidatingSectorsInALforOldInt13h: |
---|
[567] | 122 | test al, al ; Check if 0 < AL < 128 (Clears OF) |
---|
| 123 | jle SHORT .CheckIf128Sectors ; Jump if not |
---|
[218] | 124 | ret ; Continue with transfer |
---|
| 125 | |
---|
| 126 | ALIGN JUMP_ALIGN |
---|
[567] | 127 | .CheckIf128Sectors: |
---|
[218] | 128 | cmp al, 128 |
---|
[567] | 129 | jne SHORT InvalidNumberOfSectorsRequested |
---|
[218] | 130 | test si, si ; Offset must be zero to xfer 128 sectors |
---|
[221] | 131 | jnz SHORT CannotAlignPointerProperly |
---|
[218] | 132 | ret ; Continue with transfer |
---|
| 133 | |
---|
[221] | 134 | InvalidDAP: |
---|
| 135 | InvalidNumberOfSectorsRequested: |
---|
| 136 | Prepare_ReturnFromInt13hWithInvalidFunctionError: |
---|
[218] | 137 | mov ah, RET_HD_INVALID |
---|
[322] | 138 | SKIP2B f |
---|
| 139 | CannotAlignPointerProperly: |
---|
| 140 | mov ah, RET_HD_BOUNDARY |
---|
[221] | 141 | ZeroSectorsRequestedSoNoErrors: |
---|
[218] | 142 | jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
| 143 | |
---|
[221] | 144 | |
---|
| 145 | |
---|
| 146 | ; Command lookup tables |
---|
| 147 | g_rgbReadCommandLookup: |
---|
| 148 | db COMMAND_READ_SECTORS ; 00b, CHS or LBA28 single sector |
---|
| 149 | db COMMAND_READ_SECTORS_EXT ; 01b, LBA48 single sector |
---|
| 150 | db COMMAND_READ_MULTIPLE ; 10b, CHS or LBA28 block mode |
---|
[413] | 151 | %ifdef MODULE_EBIOS |
---|
[221] | 152 | db COMMAND_READ_MULTIPLE_EXT ; 11b, LBA48 block mode |
---|
[413] | 153 | %endif |
---|
[221] | 154 | |
---|
| 155 | g_rgbWriteCommandLookup: |
---|
| 156 | db COMMAND_WRITE_SECTORS |
---|
| 157 | db COMMAND_WRITE_SECTORS_EXT |
---|
| 158 | db COMMAND_WRITE_MULTIPLE |
---|
[413] | 159 | %ifdef MODULE_EBIOS |
---|
[221] | 160 | db COMMAND_WRITE_MULTIPLE_EXT |
---|
[413] | 161 | %endif |
---|
[221] | 162 | |
---|
| 163 | g_rgbVerifyCommandLookup: |
---|
| 164 | db COMMAND_VERIFY_SECTORS |
---|
| 165 | db COMMAND_VERIFY_SECTORS_EXT |
---|
| 166 | db COMMAND_VERIFY_SECTORS |
---|
[413] | 167 | %ifdef MODULE_EBIOS |
---|
[221] | 168 | db COMMAND_VERIFY_SECTORS_EXT |
---|
[413] | 169 | %endif |
---|