| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : Functions for loading correct transfer command.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; CommandLookup_GetEbiosIndexToBX
|
|---|
| 9 | ; Parameters:
|
|---|
| 10 | ; DS:DI: Ptr to DPT
|
|---|
| 11 | ; ES:SI: Ptr to DAP (Disk Address Packet)
|
|---|
| 12 | ; Returns:
|
|---|
| 13 | ; BX: Index to command lookup table
|
|---|
| 14 | ; Corrupts registers:
|
|---|
| 15 | ; AX, DX
|
|---|
| 16 | ;--------------------------------------------------------------------
|
|---|
| 17 | ALIGN JUMP_ALIGN
|
|---|
| 18 | CommandLookup_GetEbiosIndexToBX:
|
|---|
| 19 | ; LBA28 or LBA48 command
|
|---|
| 20 | xor dx, dx
|
|---|
| 21 | mov al, [es:si+DAP.qwLBA+3] ; Load LBA48 byte 3 (bits 24...31)
|
|---|
| 22 | and ax, 00F0h ; Clear LBA28 bits 24...27
|
|---|
| 23 | or ax, [es:si+DAP.qwLBA+4] ; Set bits from LBA bytes 4 and 5
|
|---|
| 24 | cmp dx, ax ; Set CF if any of bits 28...47 set
|
|---|
| 25 | rcl dx, 1 ; DX = 0 for LBA28, DX = 1 for LBA48
|
|---|
| 26 | call CommandLookup_GetOldInt13hIndexToBX
|
|---|
| 27 | or bx, dx ; Set block mode / single sector bit
|
|---|
| 28 | ret
|
|---|
| 29 |
|
|---|
| 30 | ;--------------------------------------------------------------------
|
|---|
| 31 | ; CommandLookup_GetOldInt13hIndexToBX
|
|---|
| 32 | ; Parameters:
|
|---|
| 33 | ; DS:DI: Ptr to DPT
|
|---|
| 34 | ; Returns:
|
|---|
| 35 | ; BX: Index to command lookup table
|
|---|
| 36 | ; Corrupts registers:
|
|---|
| 37 | ; Nothing
|
|---|
| 38 | ;--------------------------------------------------------------------
|
|---|
| 39 | ALIGN JUMP_ALIGN
|
|---|
| 40 | CommandLookup_GetOldInt13hIndexToBX:
|
|---|
| 41 | ; Block mode or single sector
|
|---|
| 42 | mov bl, [di+DPT.bFlagsHigh]
|
|---|
| 43 | and bx, BYTE FLGH_DPT_BLOCK_MODE_SUPPORTED ; Bit 1
|
|---|
| 44 | ret
|
|---|
| 45 |
|
|---|
| 46 |
|
|---|
| 47 | g_rgbReadCommandLookup:
|
|---|
| 48 | db COMMAND_READ_SECTORS ; 00b, CHS or LBA28 single sector
|
|---|
| 49 | db COMMAND_READ_SECTORS_EXT ; 01b, LBA48 single sector
|
|---|
| 50 | db COMMAND_READ_MULTIPLE ; 10b, CHS or LBA28 block mode
|
|---|
| 51 | db COMMAND_READ_MULTIPLE_EXT ; 11b, LBA48 block mode
|
|---|
| 52 |
|
|---|
| 53 | g_rgbWriteCommandLookup:
|
|---|
| 54 | db COMMAND_WRITE_SECTORS
|
|---|
| 55 | db COMMAND_WRITE_SECTORS_EXT
|
|---|
| 56 | db COMMAND_WRITE_MULTIPLE
|
|---|
| 57 | db COMMAND_WRITE_MULTIPLE_EXT
|
|---|
| 58 |
|
|---|
| 59 | g_rgbVerifyCommandLookup:
|
|---|
| 60 | db COMMAND_VERIFY_SECTORS
|
|---|
| 61 | db COMMAND_VERIFY_SECTORS_EXT
|
|---|
| 62 | db COMMAND_VERIFY_SECTORS
|
|---|
| 63 | db COMMAND_VERIFY_SECTORS_EXT
|
|---|
