| 1 | ; Project name : XTIDE Universal BIOS
|
|---|
| 2 | ; Description : IDE Status Register polling functions.
|
|---|
| 3 |
|
|---|
| 4 | ; Section containing code
|
|---|
| 5 | SECTION .text
|
|---|
| 6 |
|
|---|
| 7 | ;--------------------------------------------------------------------
|
|---|
| 8 | ; Waits Hard Disk IRQ when not transferring data.
|
|---|
| 9 | ; If interrupts are disabled, RDY flag is polled.
|
|---|
| 10 | ;
|
|---|
| 11 | ; HStatus_WaitIrqOrRdy
|
|---|
| 12 | ; Parameters:
|
|---|
| 13 | ; DS:BX: Ptr to DPT
|
|---|
| 14 | ; Returns:
|
|---|
| 15 | ; AH: BIOS Error code
|
|---|
| 16 | ; CF: 0 if wait succesfull
|
|---|
| 17 | ; 1 if any error
|
|---|
| 18 | ; Corrupts registers:
|
|---|
| 19 | ; AL, CX, DX
|
|---|
| 20 | ;--------------------------------------------------------------------
|
|---|
| 21 | ALIGN JUMP_ALIGN
|
|---|
| 22 | HStatus_WaitIrqOrRdy:
|
|---|
| 23 | call HIRQ_WaitForIRQ
|
|---|
| 24 | jnc SHORT .PollRdySinceNoWaitingOnOsHook
|
|---|
| 25 | jmp HError_ProcessErrorsAfterPollingBSY
|
|---|
| 26 |
|
|---|
| 27 | ALIGN JUMP_ALIGN
|
|---|
| 28 | .PollRdySinceNoWaitingOnOsHook:
|
|---|
| 29 | mov cl, B_TIMEOUT_DRQ ; Load DRQ (not RDY) timeout
|
|---|
| 30 | jmp SHORT HStatus_WaitRdy ; Jump to poll RDY
|
|---|
| 31 |
|
|---|
| 32 |
|
|---|
| 33 | ;--------------------------------------------------------------------
|
|---|
| 34 | ; Waits until Hard Disk is ready to transfer data.
|
|---|
| 35 | ;
|
|---|
| 36 | ; HStatus_WaitIrqOrDrq
|
|---|
| 37 | ; Parameters:
|
|---|
| 38 | ; DS:BX: Ptr to DPT (in RAMVARS segment)
|
|---|
| 39 | ; Returns:
|
|---|
| 40 | ; AH: BIOS Error code
|
|---|
| 41 | ; CF: 0 if wait succesfull
|
|---|
| 42 | ; 1 if any error
|
|---|
| 43 | ; Corrupts registers:
|
|---|
| 44 | ; AL
|
|---|
| 45 | ;--------------------------------------------------------------------
|
|---|
| 46 | ALIGN JUMP_ALIGN
|
|---|
| 47 | HStatus_WaitIrqOrDrq:
|
|---|
| 48 | call HIRQ_WaitForIRQ
|
|---|
| 49 | jnc SHORT .PollDrqSinceNoWaitingOnOsHook
|
|---|
| 50 | jmp HError_ProcessErrorsAfterPollingBSY
|
|---|
| 51 |
|
|---|
| 52 | ALIGN JUMP_ALIGN
|
|---|
| 53 | .PollDrqSinceNoWaitingOnOsHook:
|
|---|
| 54 | push dx
|
|---|
| 55 | push cx
|
|---|
| 56 | call HStatus_WaitDrqDefTime
|
|---|
| 57 | pop cx
|
|---|
| 58 | pop dx
|
|---|
| 59 | ret
|
|---|
| 60 |
|
|---|
| 61 |
|
|---|
| 62 | ;--------------------------------------------------------------------
|
|---|
| 63 | ; Waits until busy flag is cleared from selected Hard Disk drive.
|
|---|
| 64 | ;
|
|---|
| 65 | ; HStatus_WaitBsyDefTime Uses default timeout
|
|---|
| 66 | ; HStatus_WaitBsy Uses user defined timeout
|
|---|
| 67 | ; HStatus_WaitBsyBase Uses user base port address and timeout
|
|---|
| 68 | ; Parameters:
|
|---|
| 69 | ; CL: Timeout value in system timer ticks (not HStatus_WaitBsyDefTime)
|
|---|
| 70 | ; DX: IDE Base port address (HUtil_WaitBsyBase only)
|
|---|
| 71 | ; DS: Segment to RAMVARS
|
|---|
| 72 | ; Returns:
|
|---|
| 73 | ; AH: BIOS Error code
|
|---|
| 74 | ; DX: IDE Status Register Address
|
|---|
| 75 | ; CF: 0 if wait succesfull
|
|---|
| 76 | ; 1 if any error
|
|---|
| 77 | ; Corrupts registers:
|
|---|
| 78 | ; AL, CX
|
|---|
| 79 | ;--------------------------------------------------------------------
|
|---|
| 80 | ALIGN JUMP_ALIGN
|
|---|
| 81 | HStatus_WaitBsyDefTime:
|
|---|
| 82 | mov cl, B_TIMEOUT_BSY ; Load timeout value
|
|---|
| 83 | ALIGN JUMP_ALIGN
|
|---|
| 84 | HStatus_WaitBsy:
|
|---|
| 85 | mov dx, [RAMVARS.wIdeBase] ; Load offset to base port
|
|---|
| 86 | ALIGN JUMP_ALIGN
|
|---|
| 87 | HStatus_WaitBsyBase:
|
|---|
| 88 | add dx, BYTE REGR_IDE_ST ; Add offset to status reg
|
|---|
| 89 | jmp SHORT HStatus_PollBsy ; Wait until not busy
|
|---|
| 90 |
|
|---|
| 91 |
|
|---|
| 92 | ;--------------------------------------------------------------------
|
|---|
| 93 | ; Waits until Hard Disk is ready to accept commands.
|
|---|
| 94 | ;
|
|---|
| 95 | ; HStatus_WaitRdyDefTime Uses default timeout
|
|---|
| 96 | ; HStatus_WaitRdy Uses user defined timeout
|
|---|
| 97 | ; HStatus_WaitRdyBase Uses user base port address and timeout
|
|---|
| 98 | ; Parameters:
|
|---|
| 99 | ; CL: Timeout value in system timer ticks (not HStatus_WaitRdyDefTime)
|
|---|
| 100 | ; DX: IDE Base port address (HStatus_WaitRdyBase only)
|
|---|
| 101 | ; DS: Segment to RAMVARS
|
|---|
| 102 | ; Returns:
|
|---|
| 103 | ; AH: BIOS Error code
|
|---|
| 104 | ; DX: IDE Status Register Address
|
|---|
| 105 | ; CF: 0 if wait succesfull
|
|---|
| 106 | ; 1 if any error
|
|---|
| 107 | ; Corrupts registers:
|
|---|
| 108 | ; AL, CX
|
|---|
| 109 | ;--------------------------------------------------------------------
|
|---|
| 110 | ALIGN JUMP_ALIGN
|
|---|
| 111 | HStatus_WaitRdyDefTime:
|
|---|
| 112 | mov cl, B_TIMEOUT_RDY ; Load timeout value
|
|---|
| 113 | ALIGN JUMP_ALIGN
|
|---|
| 114 | HStatus_WaitRdy:
|
|---|
| 115 | mov dx, [RAMVARS.wIdeBase] ; Load offset to base port
|
|---|
| 116 | ALIGN JUMP_ALIGN
|
|---|
| 117 | HStatus_WaitRdyBase:
|
|---|
| 118 | add dx, BYTE REGR_IDE_ST ; Add offset to status reg
|
|---|
| 119 | mov ah, FLG_IDE_ST_DRDY ; Flag to poll
|
|---|
| 120 | jmp SHORT HStatus_PollBsyAndFlg ; Wait until flag set
|
|---|
| 121 |
|
|---|
| 122 |
|
|---|
| 123 | ;--------------------------------------------------------------------
|
|---|
| 124 | ; Waits until Hard Disk is ready to transfer data.
|
|---|
| 125 | ; Note! This function polls DRQ even if interrupts are enabled!
|
|---|
| 126 | ;
|
|---|
| 127 | ; HStatus_WaitDrqDefTime Uses default timeout
|
|---|
| 128 | ; HStatus_WaitDrq Uses user defined timeout
|
|---|
| 129 | ; HStatus_WaitDrqBase Uses user base port address and timeout
|
|---|
| 130 | ; Parameters:
|
|---|
| 131 | ; CL: Timeout value in system timer ticks (not HStatus_WaitDrqDefTime)
|
|---|
| 132 | ; DX: IDE Base port address (HStatus_WaitDrqBase only)
|
|---|
| 133 | ; DS: Segment to RAMVARS
|
|---|
| 134 | ; Returns:
|
|---|
| 135 | ; AH: BIOS Error code
|
|---|
| 136 | ; DX: IDE Status Register Address
|
|---|
| 137 | ; CF: 0 if wait succesfull
|
|---|
| 138 | ; 1 if any error
|
|---|
| 139 | ; Corrupts registers:
|
|---|
| 140 | ; AL, CX
|
|---|
| 141 | ;--------------------------------------------------------------------
|
|---|
| 142 | ALIGN JUMP_ALIGN
|
|---|
| 143 | HStatus_WaitDrqDefTime:
|
|---|
| 144 | mov cl, B_TIMEOUT_DRQ ; Load timeout value
|
|---|
| 145 | ALIGN JUMP_ALIGN
|
|---|
| 146 | HStatus_WaitDrq:
|
|---|
| 147 | mov dx, [RAMVARS.wIdeBase] ; Load offset to base port
|
|---|
| 148 | ALIGN JUMP_ALIGN
|
|---|
| 149 | HStatus_WaitDrqBase:
|
|---|
| 150 | add dx, BYTE REGR_IDE_ST ; Add offset to status reg
|
|---|
| 151 | mov ah, FLG_IDE_ST_DRQ ; Flag to poll
|
|---|
| 152 | ; Fall to HStatus_PollBsyAndFlg
|
|---|
| 153 |
|
|---|
| 154 | ;--------------------------------------------------------------------
|
|---|
| 155 | ; IDE Status register polling.
|
|---|
| 156 | ; This function first waits until controller is not busy.
|
|---|
| 157 | ; When not busy, IDE Status Register is polled until wanted flag is set.
|
|---|
| 158 | ;
|
|---|
| 159 | ; HStatus_PollBusyAndFlg
|
|---|
| 160 | ; Parameters:
|
|---|
| 161 | ; AH: Status Register Flag to poll (until set) when not busy
|
|---|
| 162 | ; CL: Timeout value in system timer ticks
|
|---|
| 163 | ; DX: IDE Status Register Address
|
|---|
| 164 | ; DS: Segment to RAMVARS
|
|---|
| 165 | ; Returns:
|
|---|
| 166 | ; AH: BIOS Error code
|
|---|
| 167 | ; CF: Clear if wait completed successfully (no errors)
|
|---|
| 168 | ; Set if any error
|
|---|
| 169 | ; Corrupts registers:
|
|---|
| 170 | ; AL, CX
|
|---|
| 171 | ;--------------------------------------------------------------------
|
|---|
| 172 | ALIGN JUMP_ALIGN
|
|---|
| 173 | HStatus_PollBsyAndFlg:
|
|---|
| 174 | call InitializeTimeoutWithTicksInCL ; Initialize timeout counter
|
|---|
| 175 | in al, dx ; Discard contents for first read
|
|---|
| 176 | ; (should read Alternate Status Register)
|
|---|
| 177 | ALIGN JUMP_ALIGN
|
|---|
| 178 | .PollLoop:
|
|---|
| 179 | in al, dx ; Load IDE Status Register
|
|---|
| 180 | test al, FLG_IDE_ST_BSY ; Controller busy?
|
|---|
| 181 | jnz SHORT .UpdateTimeout ; If so, jump to timeout update
|
|---|
| 182 | test al, ah ; Test secondary flag
|
|---|
| 183 | jnz SHORT GetErrorCodeFromPollingToAH ; If set, break loop
|
|---|
| 184 | ALIGN JUMP_ALIGN
|
|---|
| 185 | .UpdateTimeout:
|
|---|
| 186 | call SetCFifTimeout
|
|---|
| 187 | jnc SHORT .PollLoop ; Loop if time left (sets CF on timeout)
|
|---|
| 188 | jmp HError_ProcessTimeoutAfterPollingBSYandSomeOtherStatusBit
|
|---|
| 189 |
|
|---|
| 190 | ;--------------------------------------------------------------------
|
|---|
| 191 | ; IDE Status register polling.
|
|---|
| 192 | ; This function waits until controller is not busy.
|
|---|
| 193 | ;
|
|---|
| 194 | ; HStatus_PollBsy
|
|---|
| 195 | ; Parameters:
|
|---|
| 196 | ; CL: Timeout value in system timer ticks
|
|---|
| 197 | ; DX: IDE Status Register Address
|
|---|
| 198 | ; DS: Segment to RAMVARS
|
|---|
| 199 | ; Returns:
|
|---|
| 200 | ; AH: BIOS Error code
|
|---|
| 201 | ; CF: Clear if wait completed successfully (no errors)
|
|---|
| 202 | ; Set if any error
|
|---|
| 203 | ; Corrupts registers:
|
|---|
| 204 | ; AL, CX
|
|---|
| 205 | ;--------------------------------------------------------------------
|
|---|
| 206 | ALIGN JUMP_ALIGN
|
|---|
| 207 | HStatus_PollBsy:
|
|---|
| 208 | call InitializeTimeoutWithTicksInCL ; Initialize timeout counter
|
|---|
| 209 | in al, dx ; Discard contents for first read
|
|---|
| 210 | ; (should read Alternate Status Register)
|
|---|
| 211 | ALIGN JUMP_ALIGN
|
|---|
| 212 | .PollLoop:
|
|---|
| 213 | in al, dx ; Load IDE Status Reg
|
|---|
| 214 | test al, FLG_IDE_ST_BSY ; Controller busy?
|
|---|
| 215 | jz SHORT GetErrorCodeFromPollingToAH ; If not, jump to check errors
|
|---|
| 216 | call SetCFifTimeout ; Update timeout counter
|
|---|
| 217 | jnc SHORT .PollLoop ; Loop if time left (sets CF on timeout)
|
|---|
| 218 | ALIGN JUMP_ALIGN
|
|---|
| 219 | GetErrorCodeFromPollingToAH:
|
|---|
| 220 | jmp HError_ProcessErrorsAfterPollingBSY
|
|---|
| 221 |
|
|---|
| 222 |
|
|---|
| 223 | ;--------------------------------------------------------------------
|
|---|
| 224 | ; InitializeTimeoutWithTicksInCL
|
|---|
| 225 | ; Parameters:
|
|---|
| 226 | ; CL: Timeout value in system timer ticks
|
|---|
| 227 | ; DS: Segment to RAMVARS
|
|---|
| 228 | ; Returns:
|
|---|
| 229 | ; Nothing
|
|---|
| 230 | ; Corrupts registers:
|
|---|
| 231 | ; CX
|
|---|
| 232 | ;--------------------------------------------------------------------
|
|---|
| 233 | ALIGN JUMP_ALIGN
|
|---|
| 234 | InitializeTimeoutWithTicksInCL:
|
|---|
| 235 | push bx
|
|---|
| 236 | xchg cx, ax
|
|---|
| 237 |
|
|---|
| 238 | xor ah, ah ; Timeout ticks now in AX
|
|---|
| 239 | mov bx, RAMVARS.wTimeoutCounter
|
|---|
| 240 | call TimerTicks_InitializeTimeoutFromAX
|
|---|
| 241 |
|
|---|
| 242 | xchg ax, cx ; Restore AX
|
|---|
| 243 | pop bx
|
|---|
| 244 | ret
|
|---|
| 245 |
|
|---|
| 246 | ;--------------------------------------------------------------------
|
|---|
| 247 | ; SetCFifTimeout
|
|---|
| 248 | ; Parameters:
|
|---|
| 249 | ; DS: Segment to RAMVARS
|
|---|
| 250 | ; Returns:
|
|---|
| 251 | ; CF: Set if timeout
|
|---|
| 252 | ; Cleared if time left
|
|---|
| 253 | ; Corrupts registers:
|
|---|
| 254 | ; CX
|
|---|
| 255 | ;--------------------------------------------------------------------
|
|---|
| 256 | ALIGN JUMP_ALIGN
|
|---|
| 257 | SetCFifTimeout:
|
|---|
| 258 | push bx
|
|---|
| 259 | xchg cx, ax
|
|---|
| 260 |
|
|---|
| 261 | mov bx, RAMVARS.wTimeoutCounter
|
|---|
| 262 | call TimerTicks_GetTimeoutTicksLeftToAXfromDSBX
|
|---|
| 263 |
|
|---|
| 264 | xchg ax, cx ; Restore AX
|
|---|
| 265 | pop bx
|
|---|
| 266 | ret
|
|---|
