source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/Common/HPIO.asm@ 130

Last change on this file since 130 was 116, checked in by krille_n_@…, 14 years ago

Changes to all parts of the project:

  • Removed a redundant macro (HPIO_NORMALIZE_PTR)
  • Deleted XTIDE_Universal_BIOS/Inc/BiosData.inc since that was also redundant.
  • Size optimization: Changed the LOAD_BDA_SEGMENT_TO macro to use the stack on 186+ processors (the old behaviour can still be used where needed).
  • Made other minor size optimizations and cleanups to various functions, mostly in the Int13h handler.
File size: 8.6 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : PIO transfer functions.
3
4; Structure containing variables for PIO transfer functions
5struc PIOVARS, -6
6 .fnXfer resb 2 ; Offset to transfer function
7 .wBlockSize resb 2 ; Block size in WORDs
8 .wWordsLeft resb 2 ; Number of WORDs left to transfer
9 ; (full sectors, can be partial block)
10endstruc
11
12
13; Section containing code
14SECTION .text
15
16;--------------------------------------------------------------------
17; Reads sectors from hard disk using PIO transfer mode.
18;
19; HPIO_ReadBlock
20; Parameters:
21; AL: Number of sectors to read (1...255)
22; ES:BX: Pointer to buffer to recieve data
23; DS:DI: Ptr to Disk Parameter Table
24; Returns:
25; AH: BIOS Error code
26; CF: 0 if transfer succesfull
27; 1 if any error
28; Corrupts registers:
29; AL, BX, CX, DX
30;--------------------------------------------------------------------
31ALIGN JUMP_ALIGN
32HPIO_ReadBlock:
33 push es
34
35 ; Create PIOVARS to stack
36 eENTER PIOVARS_size, 0
37
38 push si
39 mov si, g_rgfnPioRead ; Offset to read function lookup
40 call HPIO_InitializePIOVARS ; Store word count and block size
41 pop si
42
43 ; Start to read data
44 xchg bx, di ; DS:BX points DPT, ES:DI points buffer
45 mov dx, [RAMVARS.wIdeBase] ; Load IDE Base Port address
46 call HPIO_ReadFromDrive
47
48 ; Destroy stack frame
49 eLEAVE
50 mov di, bx ; Restore DI
51 pop es
52 ret
53
54
55;--------------------------------------------------------------------
56; Initializes PIOVARS members.
57;
58; HPIO_InitializePIOVARS
59; Parameters:
60; AL: Number of sectors to transfer (1...255)
61; SI: Offset to transfer function lookup table
62; DS:DI: Ptr to Disk Parameter Table
63; ES:BX: Ptr to source or destination data buffer
64; SS:BP: Ptr to PIOVARS
65; Returns:
66; ES:BX: Normalized pointer to data buffer
67; Corrupts registers:
68; AX, CX
69;--------------------------------------------------------------------
70ALIGN JUMP_ALIGN
71HPIO_InitializePIOVARS:
72 ; Store number of WORDs to transfer
73 mov ah, al ; Number of WORDs to transfer...
74 xor al, al ; ...to AX
75 mov [bp+PIOVARS.wWordsLeft], ax ; Store WORD count
76
77 ; Store block size in WORDs
78 mov ah, [di+DPT.bSetBlock] ; AX = block size in WORDs
79 mov [bp+PIOVARS.wBlockSize], ax ; Store block size
80
81 ; Get transfer function based on bus type
82 xchg ax, bx ; Backup BX
83 eMOVZX bx, BYTE [di+DPT.bIdeOff] ; CS:BX now points to IDEVARS
84 mov bl, BYTE [cs:bx+IDEVARS.bBusType] ; Load bus type to BX
85 mov bx, [cs:bx+si] ; Load offset to transfer function
86 mov [bp+PIOVARS.fnXfer], bx ; Store offset to transfer function
87 xchg bx, ax
88 ; Fall to HPIO_NormalizeDataPointer
89
90;--------------------------------------------------------------------
91; Normalizes far pointers so that offset overflows won't happen
92; when transferring data using PIO.
93;
94; HPIO_NormalizeDataPointer
95; Parameters:
96; ES:BX: Ptr to source or destination data buffer
97; Returns:
98; ES:BX: Normalized pointer to data buffer
99; Corrupts registers:
100; AX, CX
101;--------------------------------------------------------------------
102;ALIGN JUMP_ALIGN
103HPIO_NormalizeDataPointer:
104 NORMALIZE_FAR_POINTER es, bx, ax, cx
105 ret
106
107
108;--------------------------------------------------------------------
109; Reads blocks using PIO transfers.
110;
111; HPIO_ReadFromDrive
112; Parameters:
113; DX: IDE Data port address
114; DS:BX: Ptr to DPT (in RAMVARS segment)
115; ES:DI: Normalized ptr to buffer to recieve data
116; SS:BP: Ptr to PIOVARS
117; Returns:
118; AH: BIOS Error code
119; CF: 0 if transfer succesfull
120; 1 if any error
121; Corrupts registers:
122; AL, CX, DX, DI
123;--------------------------------------------------------------------
124ALIGN JUMP_ALIGN
125HPIO_ReadFromDrive:
126 cld ; INS to increment DI
127ALIGN JUMP_ALIGN
128.BlockLoop:
129 call HStatus_WaitIrqOrDrq ; Wait until ready to transfer
130 jc SHORT HPIO_WriteToDrive.RetError ; Return if error (code in AH)
131 mov cx, [bp+PIOVARS.wBlockSize] ; Load block size
132 sub [bp+PIOVARS.wWordsLeft], cx ; Transferring last (possibly partial) block?
133 jbe SHORT .XferLastBlock ; If so, jump to transfer
134 call [bp+PIOVARS.fnXfer] ; Transfer full block
135 jmp SHORT .BlockLoop ; Loop while blocks left
136ALIGN JUMP_ALIGN
137.XferLastBlock:
138 add cx, [bp+PIOVARS.wWordsLeft] ; CX to partial block size
139 call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
140 jmp HStatus_WaitBsyDefTime ; Check for errors
141
142
143;--------------------------------------------------------------------
144; Writes sectors to hard disk using PIO transfer mode.
145;
146; HPIO_WriteBlock
147; Parameters:
148; AL: Number of sectors to write (1...255)
149; ES:BX: Pointer to buffer containing data
150; DS:DI: Ptr to Disk Parameter Table
151; Returns:
152; AH: BIOS Error code
153; CF: 0 if transfer successfull
154; 1 if any error
155; Corrupts registers:
156; AL, BX, CX, DX
157;--------------------------------------------------------------------
158ALIGN JUMP_ALIGN
159HPIO_WriteBlock:
160 push es
161 push si
162
163 ; Create PIOVARS to stack
164 eENTER PIOVARS_size, 0
165
166 mov si, g_rgfnPioWrite ; Offset to write function lookup
167 call HPIO_InitializePIOVARS ; Store word count and block size
168
169 ; Prepare pointers and start transfer
170 mov si, bx ; ES:SI now points source buffer
171 mov bx, di ; DS:BX now points DPT
172 call HPIO_WriteToDrive
173
174 ; Destroy stack frame
175 eLEAVE
176
177 pop si
178 pop es
179 ret
180
181
182;--------------------------------------------------------------------
183; Writes blocks using PIO transfers.
184;
185; HPIO_WriteToDrive
186; Parameters:
187; DS:BX: Ptr to DPT (in RAMVARS segment)
188; ES:SI: Normalized ptr to buffer containing data
189; SS:BP: Ptr to PIOVARS
190; Returns:
191; AH: BIOS Error code
192; CF: 0 if transfer succesfull
193; 1 if any error
194; Corrupts registers:
195; AL, CX, DX, SI
196;--------------------------------------------------------------------
197ALIGN JUMP_ALIGN
198HPIO_WriteToDrive:
199 cld ; OUTS to increment SI
200 call HStatus_WaitDrqDefTime ; Always poll DRQ for first block, get status reg to DX
201 jc SHORT .RetError ; Return if error (code in AH)
202 sub dx, BYTE REGR_IDE_ST ; DX to Data Port address
203ALIGN JUMP_ALIGN
204.BlockLoop:
205 mov cx, [bp+PIOVARS.wBlockSize] ; Load block size
206 sub [bp+PIOVARS.wWordsLeft], cx ; Transferring last (possibly partial) block?
207 jbe SHORT .XferLastBlock ; If so, jump to transfer
208 call [bp+PIOVARS.fnXfer] ; Transfer full block
209 call HStatus_WaitIrqOrDrq ; Wait until ready to transfer
210 jnc SHORT .BlockLoop ; If no error, loop while blocks left
211.RetError:
212 ret ; This ret is shared with HPIO_ReadFromDrive
213ALIGN JUMP_ALIGN
214.XferLastBlock:
215 add cx, [bp+PIOVARS.wWordsLeft] ; CX to partial block size
216 call [bp+PIOVARS.fnXfer] ; Transfer possibly partial block
217 jmp HStatus_WaitIrqOrRdy ; Check for errors
218
219
220;--------------------------------------------------------------------
221; Bus specific transfer functions and lookup table.
222;
223; HPIO_DualByteRead Dual port 8-bit XTIDE PIO read transfer
224; HPIO_WordRead Normal 16-bit IDE PIO read transfer
225; HPIO_DualByteWrite Dual port 8-bit XTIDE PIO write transfer
226; HPIO_WordWrite Normal 16-bit IDE PIO write transfer
227; Parameters:
228; CX: Block size in WORDs
229; DX: IDE Data port address
230; ES:DI: Normalized ptr to buffer to recieve data (read only)
231; ES:SI: Normalized ptr to buffer containing data (write only)
232; Returns:
233; Nothing
234; Corrupts registers:
235; AX, CX
236;--------------------------------------------------------------------
237ALIGN JUMP_ALIGN
238HPIO_DualByteRead:
239 eREP_DUAL_BYTE_PORT_INSW
240 ret
241ALIGN JUMP_ALIGN
242HPIO_WordRead:
243 rep
244 db 6Dh ; INSW
245 ret
246ALIGN JUMP_ALIGN
247HPIO_DWordRead:
248 shr cx, 1 ; WORD count to DWORD count
249 rep
250 db 66h ; Override operand size to 32-bit
251 db 6Dh ; INSW/INSD
252 ret
253ALIGN JUMP_ALIGN
254HPIO_SingleByteRead:
255 eREP_SINGLE_BYTE_PORT_INSW
256 ret
257
258ALIGN JUMP_ALIGN
259HPIO_DualByteWrite:
260 eREP_DUAL_BYTE_PORT_OUTSW
261 ret
262ALIGN JUMP_ALIGN
263HPIO_WordWrite:
264 eSEG es ; Source is ES segment
265 rep
266 db 6Fh ; OUTSW
267 ret
268ALIGN JUMP_ALIGN
269HPIO_DWordWrite:
270 shr cx, 1 ; WORD count to DWORD count
271 eSEG es ; Source is ES segment
272 rep
273 db 66h ; Override operand size to 32-bit
274 db 6Fh ; OUTSW/OUTSD
275 ret
276ALIGN JUMP_ALIGN
277HPIO_SingleByteWrite:
278 eREP_SINGLE_BYTE_PORT_OUTSW
279 ret
280
281ALIGN WORD_ALIGN
282g_rgfnPioRead:
283 dw HPIO_DualByteRead ; 8-bit dual port reads
284 dw HPIO_WordRead ; 16-bit reads
285 dw HPIO_DWordRead ; 32-bit reads
286 dw HPIO_SingleByteRead ; 8-bit single port reads
287g_rgfnPioWrite:
288 dw HPIO_DualByteWrite ; 8-bit dual port writes
289 dw HPIO_WordWrite ; 16-bit writes
290 dw HPIO_DWordWrite ; 32-bit writes
291 dw HPIO_SingleByteWrite ; 8-bit single port writes
Note: See TracBrowser for help on using the repository browser.