source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/Common/HError.asm@ 114

Last change on this file since 114 was 86, checked in by krille_n_@…, 14 years ago

Size optimizations in various files in the XTIDE BIOS.
Also added a new include file for generic macros (macros.inc).

File size: 4.2 KB
Line 
1; Project name : IDE BIOS
2; Description : Error checking functions for BIOS Hard disk functions.
3
4; Section containing code
5SECTION .text
6
7;--------------------------------------------------------------------
8; HError_ProcessTimeoutAfterPollingBSYandSomeOtherStatusBit
9; HError_ProcessErrorsAfterPollingBSY
10; Parameters:
11; DS: RAMVARS segment
12; Returns:
13; AH: BIOS error code
14; CF: Set if error
15; Cleared if no error
16; Corrupts registers:
17; AL
18;--------------------------------------------------------------------
19ALIGN JUMP_ALIGN
20HError_ProcessTimeoutAfterPollingBSYandSomeOtherStatusBit:
21 call HError_GetStatusAndErrorRegistersToAXandStoreThemToBDA
22 call GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
23 jc SHORT .ReturnErrorCodeInAH
24 mov ah, RET_HD_TIMEOUT ; Force timeout since no actual error...
25 stc ; ...but wanted bit was never set
26.ReturnErrorCodeInAH:
27 ret
28
29
30ALIGN JUMP_ALIGN
31HError_ProcessErrorsAfterPollingBSY:
32%ifndef USE_186
33 call HError_GetStatusAndErrorRegistersToAXandStoreThemToBDA
34 jmp SHORT GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
35%else
36 push GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
37 ; Fall through to HError_GetStatusAndErrorRegistersToAXandStoreThemToBDA
38%endif
39
40
41;--------------------------------------------------------------------
42; HError_GetStatusAndErrorRegistersToAXandStoreThemToBDA
43; Parameters:
44; DS: RAMVARS segment
45; Returns:
46; AL: IDE Status Register contents
47; AH: IDE Error Register contents
48; Corrupts registers:
49; Nothing
50;--------------------------------------------------------------------
51ALIGN JUMP_ALIGN
52HError_GetStatusAndErrorRegistersToAXandStoreThemToBDA:
53 push ds
54 push dx
55
56 mov dx, [RAMVARS.wIdeBase] ; Load IDE base port address
57 inc dx ; Increment to Error Register
58 in al, dx ; Read Error Register...
59 mov ah, al ; ...and copy it to AH
60 add dx, BYTE REGR_IDE_ST - REGR_IDE_ERROR
61 in al, dx ; Read Status Register to AL
62
63 LOAD_BDA_SEGMENT_TO ds, dx
64 mov [HDBDA.wHDStAndErr], ax
65
66 pop dx
67 pop ds
68 ret
69
70
71;--------------------------------------------------------------------
72; GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX
73; Parameters:
74; AL: IDE Status Register contents
75; AH: IDE Error Register contents
76; Returns:
77; AH: BIOS INT 13h error code
78; CF: Set if error
79; Cleared if no error
80; Corrupts registers:
81; Nothing
82;--------------------------------------------------------------------
83ALIGN JUMP_ALIGN
84GetBiosErrorCodeToAHfromStatusAndErrorRegistersInAX:
85 test al, FLG_IDE_ST_BSY
86 jz SHORT .CheckErrorBitsFromStatusRegisterInAL
87 mov ah, RET_HD_TIMEOUT
88 jmp SHORT .ReturnBiosErrorCodeInAH
89
90ALIGN JUMP_ALIGN
91.CheckErrorBitsFromStatusRegisterInAL:
92 test al, FLG_IDE_ST_DF | FLG_IDE_ST_CORR | FLG_IDE_ST_ERR
93 jnz SHORT .ProcessErrorFromStatusRegisterInAL
94 xor ah, ah ; No errors, zero AH and CF
95 ret
96
97.ProcessErrorFromStatusRegisterInAL:
98 test al, FLG_IDE_ST_ERR ; Error specified in Error register?
99 jnz SHORT .ConvertBiosErrorToAHfromErrorRegisterInAH
100 mov ah, RET_HD_ECC ; Assume ECC corrected error
101 test al, FLG_IDE_ST_CORR ; ECC corrected error?
102 jnz SHORT .ReturnBiosErrorCodeInAH
103 mov ah, RET_HD_CONTROLLER ; Must be Device Fault
104 jmp SHORT .ReturnBiosErrorCodeInAH
105
106.ConvertBiosErrorToAHfromErrorRegisterInAH:
107 push bx
108 mov bx, .rgbRetCodeLookup
109.ErrorBitLoop:
110 rcr ah, 1 ; Set CF if error bit set
111 jc SHORT .LookupErrorCode
112 inc bx
113 cmp bx, .rgbRetCodeLookup + 8
114 jb SHORT .ErrorBitLoop ; Loop until all bits checked
115.LookupErrorCode:
116 mov ah, [cs:bx+.rgbRetCodeLookup]
117 pop bx
118
119.ReturnBiosErrorCodeInAH:
120 stc ; Set CF since error
121 ret
122
123.rgbRetCodeLookup:
124 db RET_HD_ADDRMARK ; Bit0=AMNF, Address Mark Not Found
125 db RET_HD_SEEK_FAIL ; Bit1=TK0NF, Track 0 Not Found
126 db RET_HD_INVALID ; Bit2=ABRT, Aborted Command
127 db RET_HD_NOTLOCKED ; Bit3=MCR, Media Change Requested
128 db RET_HD_NOT_FOUND ; Bit4=IDNF, ID Not Found
129 db RET_HD_LOCKED ; Bit5=MC, Media Changed
130 db RET_HD_UNCORRECC ; Bit6=UNC, Uncorrectable Data Error
131 db RET_HD_BADSECTOR ; Bit7=BBK, Bad Block Detected
132 db RET_HD_STATUSERR ; When Error Register is zero
Note: See TracBrowser for help on using the repository browser.