source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/Common/HAddress.asm@ 18

Last change on this file since 18 was 3, checked in by Tomi Tilli, 15 years ago
File size: 6.4 KB
Line 
1; File name : HAddress.asm
2; Project name : IDE BIOS
3; Created date : 11.3.2010
4; Last update : 4.4.2010
5; Author : Tomi Tilli
6; Description : Functions for address translations.
7
8; Section containing code
9SECTION .text
10
11;--------------------------------------------------------------------
12; Outputs sector count, L-CHS address and command to IDE registers.
13; This function does not wait until command has been completed.
14;
15; HAddress_ConvertParamsFromBiosLCHStoIDE
16; Parameters:
17; CH: Cylinder number, bits 7...0
18; CL: Bits 7...6: Cylinder number bits 9 and 8
19; Bits 5...0: Starting sector number (1...63)
20; DH: Starting head number (0...255)
21; DS:DI: Ptr to DPT
22; Returns:
23; BL: LBA Low Register / Sector Number Register (LBA 7...0)
24; CL: LBA Mid Register / Low Cylinder Register (LBA 15...8)
25; CH: LBA High Register / High Cylinder Register (LBA 23...16)
26; BH: Drive and Head Register (LBA 27...24)
27; Corrupts registers:
28; AX, DX
29;--------------------------------------------------------------------
30ALIGN WORD_ALIGN
31g_rgfnAddressTranslation:
32 dw HAddress_DoNotConvertLCHS ; 0, ADDR_DPT_LCHS
33 dw HAddress_ConvertLCHStoPCHS ; 1, ADDR_DPT_PCHS
34 dw HAddress_ConvertLCHStoLBARegisterValues ; 2, ADDR_DPT_LBA28
35 dw HAddress_ConvertLCHStoLBARegisterValues ; 3, ADDR_DPT_LBA48
36
37ALIGN JUMP_ALIGN
38HAddress_ConvertParamsFromBiosLCHStoIDE:
39 mov bl, [di+DPT.bFlags]
40 and bx, BYTE MASK_DPT_ADDR ; Addressing mode to BX
41 push WORD [cs:bx+g_rgfnAddressTranslation] ; Push return address
42 ; Fall to HAddress_ExtractLCHSFromBiosParams
43
44;---------------------------------------------------------------------
45; Extracts L-CHS parameters from BIOS function parameters.
46;
47; HAddress_ExtractLCHSFromBiosParams:
48; Parameters:
49; CH: Cylinder number, bits 7...0
50; CL: Bits 7...6: Cylinder number bits 9 and 8
51; Bits 5...0: Sector number
52; DH: Head number
53; Returns:
54; BL: Sector number (1...63)
55; BH: Head number (0...255)
56; CX: Cylinder number (0...1023)
57; Corrupts registers:
58; Nothing
59;--------------------------------------------------------------------
60ALIGN JUMP_ALIGN
61HAddress_ExtractLCHSFromBiosParams:
62 mov bl, cl ; Copy sector number...
63 and bl, 3Fh ; ...and limit to 1...63
64 sub cl, bl ; Remove from cylinder number high
65 eROL_IM cl, 2 ; High bits to beginning
66 mov bh, dh ; Copy Head number
67 xchg cl, ch ; Cylinder number now in CX
68 ret
69
70
71;---------------------------------------------------------------------
72; Converts BIOS LCHS parameters to IDE P-CHS parameters.
73; PCylinder = (LCylinder << n) + (LHead / PHeadCount)
74; PHead = LHead % PHeadCount
75; PSector = LSector
76;
77; HAddress_ConvertLCHStoPCHS:
78; Parameters:
79; BL: Sector number (1...63)
80; BH: Head number (0...255)
81; CX: Cylinder number (0...1023)
82; DS:DI: Ptr to Disk Parameter Table
83; Returns:
84; BL: Sector number (1...63)
85; BH: Head number (0...15)
86; CX: Cylinder number (0...16382)
87; Corrupts registers:
88; AX, DX
89;--------------------------------------------------------------------
90ALIGN JUMP_ALIGN
91HAddress_ConvertLCHStoPCHS:
92 ; LHead / PHeadCount and LHead % PHeadCount
93 eMOVZX ax, bh ; Copy L-CHS Head number to AX
94 div BYTE [di+DPT.bPHeads] ; AL = LHead / PHeadCount, AH = LHead % PHeadCount
95 mov bh, ah ; Copy P-CHS Head number to BH
96 xor ah, ah ; AX = LHead / PHeadCount
97
98 ; (LCylinder << n) + (LHead / PHeadCount)
99 mov dx, cx ; Copy L-CHS Cylinder number to DX
100 mov cl, [di+DPT.bShLtoP] ; Load shift count
101 shl dx, cl ; DX = LCylinder << n
102 add ax, dx ; AX = P-CHS Cylinder number
103 mov cx, ax ; Copy P-CHS Cylinder number to CX
104ALIGN JUMP_ALIGN
105HAddress_DoNotConvertLCHS:
106 ret
107
108
109;---------------------------------------------------------------------
110; Converts LCHS parameters to 28-bit LBA address.
111; Returned address is in same registers that
112; HAddress_DoNotConvertLCHS and HAddress_ConvertLCHStoPCHS returns.
113;
114; HAddress_ConvertLCHStoLBARegisterValues:
115; Parameters:
116; BL: Sector number (1...63)
117; BH: Head number (0...255)
118; CX: Cylinder number (0...1023)
119; DS:DI: Ptr to Disk Parameter Table
120; Returns:
121; BL: LBA Low Register / Sector Number Register (LBA 7...0)
122; CL: LBA Mid Register / Low Cylinder Register (LBA 15...8)
123; CH: LBA High Register / High Cylinder Register (LBA 23...16)
124; BH: Drive and Head Register (LBA 27...24)
125; Corrupts registers:
126; AX, DX
127;--------------------------------------------------------------------
128ALIGN JUMP_ALIGN
129HAddress_ConvertLCHStoLBARegisterValues:
130 call HAddress_ConvertLCHStoLBA28
131 mov bl, al ; Sector Number Register (LBA 7...0)
132 mov cl, ah ; Low Cylinder Register (LBA 15...8)
133 mov ch, dl ; High Cylinder Register (LBA 23...16)
134 mov bh, dh ; Drive and Head Register (LBA 27...24)
135 ret
136
137;---------------------------------------------------------------------
138; Converts LCHS parameters to 28-bit LBA address.
139; Only 24-bits are used since LHCS to LBA28 conversion has 8.4GB limit.
140; LBA = ((cylToSeek*headsPerCyl+headToSeek)*sectPerTrack)+sectToSeek-1
141;
142; HAddress_ConvertLCHStoLBA28:
143; Parameters:
144; BL: Sector number (1...63)
145; BH: Head number (0...255)
146; CX: Cylinder number (0...1023)
147; DS:DI: Ptr to Disk Parameter Table
148; Returns:
149; DX:AX: 28-bit LBA address (DH is always zero)
150; Corrupts registers:
151; BX, CX
152;--------------------------------------------------------------------
153ALIGN JUMP_ALIGN
154HAddress_ConvertLCHStoLBA28:
155 ; cylToSeek*headsPerCyl (18-bit result)
156 mov ax, cx ; Copy Cylinder number to AX
157 mul WORD [di+DPT.wLHeads] ; DX:AX = cylToSeek*headsPerCyl
158
159 ; +=headToSeek (18-bit result)
160 add al, bh ; Add Head number to DX:AX
161 adc ah, dh ; DH = Zero after previous multiplication
162 adc dl, dh
163
164 ; *=sectPerTrack (18-bit by 6-bit multiplication with 24-bit result)
165 eMOVZX cx, BYTE [di+DPT.bPSect]; Load Sectors per Track
166 xchg ax, dx ; Hiword to AX, loword to DX
167 mul cl ; AX = hiword * Sectors per Track
168 mov bh, al ; Backup hiword * Sectors per Track
169 xchg ax, dx ; Loword back to AX
170 mul cx ; DX:AX = loword * Sectors per Track
171 add dl, bh ; DX:AX = (cylToSeek*headsPerCyl+headToSeek)*sectPerTrack
172
173 ; +=sectToSeek-1 (24-bit result)
174 xor bh, bh ; Sector number now in BX
175 dec bx ; sectToSeek-=1
176 add ax, bx ; Add to loword
177 adc dl, bh ; Add possible carry to byte2, BH=zero
178 ret
Note: See TracBrowser for help on using the repository browser.