source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/Address.asm@ 159

; Project name  :   XTIDE Universal BIOS
; Description   :   Functions for address translations.

; Section containing code
SECTION .text

; Jump table for conversion functions
ALIGN WORD_ALIGN
g_rgfnAddressTranslation:
    dw      DoNotConvertLCHS                    ; 0, ADDR_DPT_LCHS
    dw      ConvertLCHStoPCHS                   ; 1, ADDR_DPT_PCHS
    dw      ConvertLCHStoLBARegisterValues      ; 2, ADDR_DPT_LBA28
    dw      ConvertLCHStoLBARegisterValues      ; 3, ADDR_DPT_LBA48


;--------------------------------------------------------------------
; Address_OldInt13hAddressToIdeAddress
;   Parameters:
;       CH:     Cylinder number, bits 7...0
;       CL:     Bits 7...6: Cylinder number bits 9 and 8
;               Bits 5...0: Starting sector number (1...63)
;       DH:     Starting head number (0...255)
;       DS:DI:  Ptr to DPT
;   Returns:
;       BL:     LBA Low Register / Sector Number Register (LBA 7...0)
;       CL:     LBA Mid Register / Low Cylinder Register (LBA 15...8)
;       CH:     LBA High Register / High Cylinder Register (LBA 23...16)
;       BH:     Drive and Head Register (LBA 27...24)
;   Corrupts registers:
;       AX, DX
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
Address_OldInt13hAddressToIdeAddress:
    call    AccessDPT_GetAddressingModeForWordLookToBX
    push    WORD [cs:bx+g_rgfnAddressTranslation]       ; Push return address
    ; Fall to Address_ExtractLCHSparametersFromOldInt13hAddress

;---------------------------------------------------------------------
; Address_ExtractLCHSparametersFromOldInt13hAddress
;   Parameters:
;       CH:     Cylinder number, bits 7...0
;       CL:     Bits 7...6: Cylinder number bits 9 and 8
;               Bits 5...0: Sector number
;       DH:     Head number
;   Returns:
;       BL:     Sector number (1...63)
;       BH:     Head number (0...255)
;       CX:     Cylinder number (0...1023)
;   Corrupts registers:
;       Nothing
;--------------------------------------------------------------------
Address_ExtractLCHSparametersFromOldInt13hAddress:
    mov     bl, cl              ; Copy sector number...
    and     bl, 3Fh             ; ...and limit to 1...63
    sub     cl, bl              ; Remove from cylinder number high
    eROL_IM cl, 2               ; High bits to beginning
    mov     bh, dh              ; Copy Head number
    xchg    cl, ch              ; Cylinder number now in CX
    ret


;---------------------------------------------------------------------
; Converts LCHS parameters to IDE P-CHS parameters.
; PCylinder = (LCylinder << n) + (LHead / PHeadCount)
; PHead     = LHead % PHeadCount
; PSector   = LSector
;
; Address_ConvertLCHStoPCHS:
;   Parameters:
;       BL:     Sector number (1...63)
;       BH:     Head number (0...255)
;       CX:     Cylinder number (0...1023)
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       BL:     Sector number (1...63)
;       BH:     Head number (0...15)
;       CX:     Cylinder number (0...16382)
;   Corrupts registers:
;       AX, DX
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
ConvertLCHStoPCHS:
    ; LHead / PHeadCount and LHead % PHeadCount
    eMOVZX  ax, bh                  ; Copy L-CHS Head number to AX
    div     BYTE [di+DPT.bPchsHeads]; AL = LHead / PHeadCount, AH = LHead % PHeadCount
    mov     bh, ah                  ; Copy P-CHS Head number to BH
    xor     ah, ah                  ; AX = LHead / PHeadCount

    ; (LCylinder << n) + (LHead / PHeadCount)
    mov     dx, cx                  ; Copy L-CHS Cylinder number to DX
    mov     cl, [di+DPT.bFlagsLow]  ; Load shift count
    and     cl, MASKL_DPT_CHS_SHIFT_COUNT
    shl     dx, cl                  ; DX = LCylinder << n
    add     ax, dx                  ; AX = P-CHS Cylinder number
    mov     cx, ax                  ; Copy P-CHS Cylinder number to CX
DoNotConvertLCHS:
    ret


;---------------------------------------------------------------------
; Converts LCHS parameters to 28-bit LBA address.
; Only 24-bits are used since LHCS to LBA28 conversion has 8.4GB limit.
; LBA = ((cylToSeek*headsPerCyl+headToSeek)*sectPerTrack)+sectToSeek-1
;
; Returned address is in same registers that
; Address_DoNotConvertLCHS and Address_ConvertLCHStoPCHS returns.
;
; ConvertLCHStoLBARegisterValues:
;   Parameters:
;       BL:     Sector number (1...63)
;       BH:     Head number (0...255)
;       CX:     Cylinder number (0...1023)
;       DS:DI:  Ptr to Disk Parameter Table
;   Returns:
;       BL:     LBA Low Register / Sector Number Register (LBA 7...0)
;       CL:     LBA Mid Register / Low Cylinder Register (LBA 15...8)
;       CH:     LBA High Register / High Cylinder Register (LBA 23...16)
;       BH:     Drive and Head Register (LBA 27...24)
;   Corrupts registers:
;       AX, DX
;--------------------------------------------------------------------
ALIGN JUMP_ALIGN
ConvertLCHStoLBARegisterValues:
    ; cylToSeek*headsPerCyl (18-bit result)
    mov     ax, cx                  ; Copy Cylinder number to AX
    eMOVZX  dx, BYTE [di+DPT.bLchsHeads]
    mul     dx                      ; DX:AX = cylToSeek*headsPerCyl

    ; +=headToSeek (18-bit result)
    add     al, bh                  ; Add Head number to DX:AX
    adc     ah, dh                  ; DH = Zero after previous multiplication
    adc     dl, dh

    ; *=sectPerTrack (18-bit by 6-bit multiplication with 24-bit result)
    eMOVZX  cx, BYTE [di+DPT.bPchsSectors]  ; Load Sectors per Track
    xchg    ax, dx                  ; Hiword to AX, loword to DX
    mul     cl                      ; AX = hiword * Sectors per Track
    mov     bh, al                  ; Backup hiword * Sectors per Track
    xchg    ax, dx                  ; Loword back to AX
    mul     cx                      ; DX:AX = loword * Sectors per Track
    add     dl, bh                  ; DX:AX = (cylToSeek*headsPerCyl+headToSeek)*sectPerTrack

    ; +=sectToSeek-1 (24-bit result)
    xor     bh, bh                  ; Sector number now in BX
    dec     bx                      ; sectToSeek-=1
    add     ax, bx                  ; Add to loword
    adc     dl, bh                  ; Add possible carry to byte2, BH=zero

    ; Copy DX:AX to proper return registers
    xchg    bx, ax                  ; BL = Sector Number Register (LBA 7...0)
    mov     cl, bh                  ; Low Cylinder Register (LBA 15...8)
    mov     ch, dl                  ; High Cylinder Register (LBA 23...16)
    mov     bh, dh                  ; Drive and Head Register (LBA 27...24)
    ret