source: xtideuniversalbios/trunk/XTIDE_Universal_BIOS/Src/Handlers/Int13h/AHDh_HReset.asm@ 412

Last change on this file since 412 was 398, checked in by aitotat@…, 13 years ago

Changes to XTIDE Universal BIOS:

  • IRQ related stuff is now optional MODULE_IRQ.
  • XT builds no longer include support for IDE IRQ.
File size: 4.5 KB
Line 
1; Project name : XTIDE Universal BIOS
2; Description : Int 13h function AH=Dh, Reset Hard Disk (Alternate reset).
3
4;
5; XTIDE Universal BIOS and Associated Tools
6; Copyright (C) 2009-2010 by Tomi Tilli, 2011-2012 by XTIDE Universal BIOS Team.
7;
8; This program is free software; you can redistribute it and/or modify
9; it under the terms of the GNU General Public License as published by
10; the Free Software Foundation; either version 2 of the License, or
11; (at your option) any later version.
12;
13; This program is distributed in the hope that it will be useful,
14; but WITHOUT ANY WARRANTY; without even the implied warranty of
15; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16; GNU General Public License for more details.
17; Visit http://www.gnu.org/licenses/old-licenses/gpl-2.0.html
18;
19
20; Section containing code
21SECTION .text
22
23;--------------------------------------------------------------------
24; Int 13h function AH=Dh, Reset Hard Disk (Alternate reset).
25;
26; AHDh_HandlerForResetHardDisk
27; Parameters:
28; DL: Translated Drive number
29; DS:DI: Ptr to DPT (in RAMVARS segment)
30; SS:BP: Ptr to IDEPACK
31; Returns with INTPACK:
32; AH: Int 13h return status
33; CF: 0 if successful, 1 if error
34;--------------------------------------------------------------------
35AHDh_HandlerForResetHardDisk:
36%ifndef USE_186
37 call AHDh_ResetDrive
38 jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
39%else
40 push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH
41 ; Fall to AHDh_ResetDrive
42%endif
43
44
45;--------------------------------------------------------------------
46; Resets hard disk.
47;
48; AHDh_ResetDrive
49; Parameters:
50; DS:DI: Ptr to DPT
51; SS:BP: Ptr to IDEPACK
52; Returns:
53; AH: Int 13h return status
54; CF: 0 if successful, 1 if error
55; Corrupts registers:
56; AL, SI
57;--------------------------------------------------------------------
58AHDh_ResetDrive:
59 push dx
60 push cx
61 push bx
62 push di
63
64%ifdef MODULE_IRQ
65 call Interrupts_UnmaskInterruptControllerForDriveInDSDI
66%endif
67 call Device_ResetMasterAndSlaveController
68 ;jc SHORT .ReturnError ; CF would be set if slave drive present without master
69 ; (error register has special values after reset)
70
71 ; Initialize Master and Slave drives
72 eMOVZX ax, [di+DPT.bIdevarsOffset] ; (AL) pointer to controller we are looking to reset
73 ; (AH) initialize error code, assume success
74
75 mov si, IterateAndResetDrives ; Callback function for FindDPT_IterateAllDPTs
76 call FindDPT_IterateAllDPTs
77
78 shr ah, 1 ; Move error code and CF into proper position
79
80 pop di
81 pop bx
82 pop cx
83 pop dx
84 ret
85
86;--------------------------------------------------------------------
87; IterateAndResetDrives: Iteration routine for use with IterateAllDPTs.
88;
89; When a drive on the controller is found, it is reset, and the error code
90; merged into overall error code for this controller. Master will be reset
91; first. Note that the iteration will go until the end of the DPT list.
92;
93; Parameters:
94; AL: Offset to IDEVARS for drives to initialize
95; AH: Error status from previous initialization
96; DS:DI: Ptr to DPT to examine
97; Returns:
98; AH: Error status from initialization
99; CF: Set to iterate all DPTs
100; Corrupts registers:
101; AL, BX, DX
102;--------------------------------------------------------------------
103IterateAndResetDrives:
104 cmp al, [di+DPT.bIdevarsOffset] ; The right controller?
105 jne .Done
106 push cx
107 push ax
108 call AH9h_InitializeDriveForUse ; Reset Master and Slave (Master will come first in DPT list)
109
110%ifdef MODULE_ADVANCED_ATA
111 jc SHORT .SkipControllerInitSinceError
112 ; Here we initialize the more advanced controllers (VLB and PCI) to get better performance for systems with 32-bit bus.
113 ; This step is optional since the controllers use slowest possible settings by default if they are not initialized.
114
115 pop ax
116 push ax
117 cmp al, [di+LARGEST_DPT_SIZE+DPT.bIdevarsOffset] ; We check if next DPT is for the same IDE controller.
118 je SHORT .SkipInitializationUntilNextDrive ; If it is, we skip the initialization.
119 call AdvAtaInit_InitializeControllerForDPTinDSDI ; Done after drive init so drives are first set to advanced PIO mode, then the controller
120.SkipInitializationUntilNextDrive:
121.SkipControllerInitSinceError:
122%endif ; MODULE_ADVANCED_ATA
123
124 pop ax
125 pop cx
126 jnc .Done
127 or ah, (RET_HD_RESETFAIL << 1) | 1 ; OR in Reset Failed error code and CF, will SHR into position later
128.Done:
129 stc ; From IterateAllDPTs perspective, the DPT is never found (continue iteration)
130 ret
131
Note: See TracBrowser for help on using the repository browser.