1 | ; Project name : XTIDE Universal BIOS |
---|
2 | ; Description : Int 13h function AH=Dh, Reset Hard Disk (Alternate reset). |
---|
3 | |
---|
4 | ; Section containing code |
---|
5 | SECTION .text |
---|
6 | |
---|
7 | ;-------------------------------------------------------------------- |
---|
8 | ; Int 13h function AH=Dh, Reset Hard Disk (Alternate reset). |
---|
9 | ; |
---|
10 | ; AHDh_HandlerForResetHardDisk |
---|
11 | ; Parameters: |
---|
12 | ; DL: Translated Drive number |
---|
13 | ; DS:DI: Ptr to DPT (in RAMVARS segment) |
---|
14 | ; SS:BP: Ptr to IDEPACK |
---|
15 | ; Returns with INTPACK: |
---|
16 | ; AH: Int 13h return status |
---|
17 | ; CF: 0 if succesfull, 1 if error |
---|
18 | ;-------------------------------------------------------------------- |
---|
19 | ALIGN JUMP_ALIGN |
---|
20 | AHDh_HandlerForResetHardDisk: |
---|
21 | %ifndef USE_186 |
---|
22 | call AHDh_ResetDrive |
---|
23 | jmp Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
24 | %else |
---|
25 | push Int13h_ReturnFromHandlerAfterStoringErrorCodeFromAH |
---|
26 | ; Fall to AHDh_ResetDrive |
---|
27 | %endif |
---|
28 | |
---|
29 | |
---|
30 | ;-------------------------------------------------------------------- |
---|
31 | ; Resets hard disk. |
---|
32 | ; |
---|
33 | ; AHDh_ResetDrive |
---|
34 | ; Parameters: |
---|
35 | ; DL: Drive number |
---|
36 | ; DS: RAMVARS segment |
---|
37 | ; SS:BP: Ptr to IDEPACK |
---|
38 | ; Returns: |
---|
39 | ; AH: Int 13h return status |
---|
40 | ; CF: 0 if succesfull, 1 if error |
---|
41 | ; Corrupts registers: |
---|
42 | ; AL, CX, SI |
---|
43 | ;-------------------------------------------------------------------- |
---|
44 | ;ALIGN JUMP_ALIGN |
---|
45 | AHDh_ResetDrive: |
---|
46 | push dx |
---|
47 | push bx |
---|
48 | push di |
---|
49 | |
---|
50 | call Interrupts_UnmaskInterruptControllerForDriveInDSDI |
---|
51 | call Device_ResetMasterAndSlaveController |
---|
52 | ;jc SHORT .ReturnError ; CF would be set if slave drive present without master |
---|
53 | ; (error register has special values after reset) |
---|
54 | |
---|
55 | ; Initialize Master and Slave drives |
---|
56 | mov al, [di+DPT.bIdevarsOffset] ; pointer to controller we are looking to reset |
---|
57 | mov ah, 0 ; initialize error code, assume success |
---|
58 | |
---|
59 | mov si, IterateAndResetDrives |
---|
60 | call IterateAllDPTs |
---|
61 | |
---|
62 | shr ah, 1 ; Move error code and CF into proper position |
---|
63 | |
---|
64 | pop di |
---|
65 | pop bx |
---|
66 | pop dx |
---|
67 | ret |
---|
68 | |
---|
69 | ;-------------------------------------------------------------------- |
---|
70 | ; IterateAndResetDrives: Iteration routine for use with IterateAllDPTs. |
---|
71 | ; |
---|
72 | ; When a drive on the controller is found, it is reset, and the error code |
---|
73 | ; merged into overall error code for this controller. Master will be reset |
---|
74 | ; first. Note that the iteration will go until the end of the DPT list. |
---|
75 | ;-------------------------------------------------------------------- |
---|
76 | IterateAndResetDrives: |
---|
77 | cmp al, [di+DPT.bIdevarsOffset] ; The right controller? |
---|
78 | jnz .done |
---|
79 | push ax |
---|
80 | call AH9h_InitializeDriveForUse ; Reset Master and Slave (Master will come first in DPT list) |
---|
81 | pop ax |
---|
82 | jc .done |
---|
83 | or ah, (RET_HD_RESETFAIL << 1) | 1 ; OR in Reset Failed error code and CF, will SHR into position later |
---|
84 | .done: |
---|
85 | stc ; From IterateAllDPTs perspective, the DPT is never found |
---|
86 | ret |
---|
87 | |
---|